Just as the title states. I'm looking for a Comp Cams part# 08-302-8 / grind # 264HR-12. Prefer new, consider lightly used for right price. Let me know what you have.

Thanks,

Matthew

http://www.compcams.com/Cam_Specs/Ca...?csid=212&sb=2

This cam is a 210/220 .480/.480 (.510/.510) with 112 lsa

 

I have a Comp Cams part # 08-304-8. The specs between my cam and the cam you're looking at are pretty close. Let me know if you're interested, where you live, etc.

 

Thanks for the reply. At this point I'm trying to stay with the 302-8 because of the lower lift numbers. I'll be using 1.6 RR on my stock 113s (more than likely with LT4 springs). I'm concerned with valvetrain geometry with going too high of lift. I'll let you know if I change my mind.

Matthew

 

Sorry, I just realized I posted this in the wrong forum - can a mod move it for me, please?

Thanks

 

Sorry to but in , but I am in need of a cam like that.

 

No worries! But I would figure with a 406 and 220 heads you would want something a little more aggressive? Is it for that motor or something else?

Matthew

 

Matt, this is for a 92 Firebird with a 350 tpi motor that is TBI injected. I will be changing my sig pic soon. My brother bought my vert when I moved to Hawaii

 

my buddy uses a .540 .558 lift cam with his 113's and has no problems

 

Thanks for the tip! Do you know what springs he's using?

(sorry to turn this into a tech thread)

 

its a solid flat tappet cam so he bought a k-kit and used the supplied springs