Hi all. Recent plan change is having me part out my engine. Heres what I've got.

MAKE OFFERS THIS STUFF HAS TO GO!!! MOST DECENT OFFERS NOT REFUSED!

-1992 chevy 355 roller short block assembly. Bored .30 over. around 35k on engine since rebuild. Includes set of roller lifters and spider assembly. $250

-Comp XR276 extreme roller cam. 224, 230 dur @ .50, .503, .510 lift with 1.5 rocker arms, 112 LSA *SOLD*

-Trick flow stock length pushrods $25

-Trick Flow 23* aluminum cylinder heads, complete, springs good for up to .540 lift cam. Centerbolt style for 87-95 engines. *SOLD*

-Dynomax shorty headers w/ Y-pipe. Headers are black painted in good shape. Y-pipe is a little banged up but works. 2 1/2 inch outlet on Y-pipe. *SOLD*

-chrome stamped steel centerbolt valve covers with hardware *SOLD*

I also have 2 distributers for the later style FI engines...88-95 I believe (small cap), but don't quote me. One is aftermarket and almost new..$50 for it, and the other is a stock replacement with new cap and rotor..30$ for that one *BOTH SOLD*

If I think of anything else I will add it.

Forgot to mention, all parts have never been driven on the street, only started and run in the driveway so they are all almost brand new!! Shortblock is the only thing with miles on it.

What condition is stock distributor in?Is the gear on the bottom worn badly?

Gear is in really good shape. Dist came out of a 93 chevy 1500 with I believe around 95K on it. Has a brand new blue cap and rotor kit too. I will check it again when I get home from work, but I am positive it's in nice shape. I had it in my car running for a little while so I know it works.

how much for the headers and y pipe shipped to Carey, Ohio 43316

PM sent


C'mon guys start makin offers!! I need to make room for a nice new 5.3 LSx!! Haha.

Also have a 400 unbored SBC engine. Ran good when pulled. Took heads off so will need head gaskets. Motor comes with heads, Heavy duty aluminum holley valve covers, oil pan, balancer, & timing cover (long block basically) 400$

I need space!!

bump

What part o Connecticut are you in?

interested in the 355, cam, pushrods. How far north are you? it would be a nice & long drive for me lol..

-T

Suffield. . .bout 15 mins north of hartford. I can pm you my address if that would help.

Like I said before, I'm about 15 mins north of Hartford. I would say I could meet you somewhere but honestly, I think that would be more trouble than it's worth, trying to shuffle a 355 between 2 trucks, since I have an engine hoist right at my house. If your really interested, I can give you a deal on that stuff. PM me and we can talk.

Bump, stuff is still for sale!!

I will sell the entire engine with front accessories, roller rockers, the WHOLE engine minus intake manifold and valve covers for 1500$!!!!! This engine cost me 3000$ to build. It is a 430 HP engine for half price.

I need space! Everything will start going to ebay in the next week.

Nvm looking for 3" outlet

TTT

Start making those offers. . .Price on heads just lowered!

TTT

Bump for a good salesman

PM sent on the cam.

Any pics of the two distributors?? Who makes the aftermarket one?? I'll probably pick up one of those two... some pics and more info on the one would be great. Thanks!

Not too sure on the brand that makes the aftermarket one. It MAY be proform but don't quote me on that. I bought it brand new in the box at a swap meet for 100$, put it in quick, had the engine running for a week or 2 and then switched to carb haha, so new distributor. Unfortunately I don't have the box anymore either, but there was no brand name on it. It looks like it's a pretty nice quality part though. The entire shaft is billet aluminum and it has a nice red cap and rotor with brass terminals. I'll post some pics up after work today (around 5PM).

I also have interest in the dizzys.. Do you have coil or any wiring to go along with them? I'm going from a in cap HEI to small cap.

I do have an MSD direct replacement coil for 87+ engines, as well as a few factory coils lying around. As far as wiring, I should have harness connectors for the coil and MAYBE 1 for the dizzy. I would have to check.

cool!!!,, let me know

How much were you looking to get for the MSD coil? If ch@os doesn't take it, I'll probably ****** that up. Definitely going to take the aftermarket dizzy though... I'll be looking for the pictures. PM sent!

PM sent

I sent you a few pms can't tell if they went through. I agree,
send me a paypal or addres please.

Pics of new dizzy *SOLD*

MSD coil and used dizzy *SOLD*

355 short block





Engine has to go. I am pretty flexible. This is a nice, solid shortblock with low miles, and it's a roller engine!!

Have a set of ford racing 30lbs injectors for sale as well, in like new condition. Were used to start a motor then I switched to carb. Paid 300$, looking for 130 shipped!!

SHORT BLOCK WAS LOWERED TO 250$ !!! I NEED IT GONE

TTT

bump...injectors and short block still up for grabs