Parting out '87 Trans Am 305 TPI, Beautiful Condition Parts
Thread Starter
Member
iTrader: (16)
Joined: Dec 2006
Posts: 469
Likes: 1
From: TX/FL
Car: 88 GTA/86 C20 Burb/91 325i
Engine: L98/454/M20
Transmission: 700R4/NV4500/Getrag
Axle/Gears: 3.27 9-bolt/3.73 14 Bolt/3.73 IRS
Parting out '87 Trans Am 305 TPI, Beautiful Condition Parts
Hello All,
I've got a 1987 Pontiac Trans Am, 305 TPI, that I smashed the hood, front fenders, and radiator support on. I'm in the process of switching some of the pieces over to an '87 Pontiac Formula that I recently purchased, but there is still lots of stuff on the car that I will not be able to use.
I would keep it all for later use, but I'm a Midshipman at the U.S. Naval Academy, and I have no storage available right now to keep stuff in. The car was in absolutely outstanding condition, the wiring harness, brackets, everything is like new inside and out. Feel free to PM me or post with whatever you need, and I'll let you know. Right off the bat, here's some pieces that I'm fairly certain people might be able to use:
-Complete TPI intake, runners, fuel rails, etc: $200
-PVC cold air intake, looks great, works awesome, with K&N filter: $50
-Edelbrock 600 cfm carb, with adapter plate, and 11" Edelbrock air cleaner, just removed from the Formula, was getting 26 highway MPG, very clean, still have boxes for everything: $120
-Accel Ignition Coil
-Formula 16x8" Aluminum wheels, all four. Painted black. We'll have to work out something on getting me some 15" wheels and tires to let it rest on, but they don't have to be fancy, I'm scrapping the car when I'm done anyways. Make an offer.
-15x7" Aluminum snowflake rims, very nice shape, will ship from Texas where I live. Centercaps included: $150 obo
-Swaybars, springs, anything like that too, again, make an offer!
I will also be able to entertain offers for anyone who would like what's left when I'm done. I plan on keeping the doors, ground effects, and rear bumper cover with some of the trim for eventually finishing out the formula, but the rest is pretty much up for grabs. There is not a drop of rust in the entire car, period.
Wiring, sensors, belts, hoses, anything your heart desires and I'm not already using, just let me know. Lots of good interior parts as well. Gray colored interior, beautiful condition.
Shipping is tough for me, I can only get to where the car is stored on weekends. If you're willing to wait, I can get stuff out, but expect some delays because it all has to be pulled, brought over, and shipped, and I don't exactly have the least demanding schedule. It's located in Annapolis, just across the river from the Academy. I can do pickups most weekends. I also make trips on occasion down to Columbia, SC, and Roanoke, VA, so I would be willing to drop stuff off along the way to help on shipping the big stuff.
I need this stuff gone guys, if you've got an offer, shoot. I can send out pictures if anyone has a request. Interested in trades as well, I'm building up this Formula and I really might be interested in anything, try me!
Thanks again, looking forward to some interest,
-Levi
SOLD:
-EGR VALVE
-MAF
-TV Cable
-TPI Wiring Harness
-Oil Pressure Sending Unit
-Computer
I've got a 1987 Pontiac Trans Am, 305 TPI, that I smashed the hood, front fenders, and radiator support on. I'm in the process of switching some of the pieces over to an '87 Pontiac Formula that I recently purchased, but there is still lots of stuff on the car that I will not be able to use.
I would keep it all for later use, but I'm a Midshipman at the U.S. Naval Academy, and I have no storage available right now to keep stuff in. The car was in absolutely outstanding condition, the wiring harness, brackets, everything is like new inside and out. Feel free to PM me or post with whatever you need, and I'll let you know. Right off the bat, here's some pieces that I'm fairly certain people might be able to use:
-Complete TPI intake, runners, fuel rails, etc: $200
-PVC cold air intake, looks great, works awesome, with K&N filter: $50
-Edelbrock 600 cfm carb, with adapter plate, and 11" Edelbrock air cleaner, just removed from the Formula, was getting 26 highway MPG, very clean, still have boxes for everything: $120
-Accel Ignition Coil
-Formula 16x8" Aluminum wheels, all four. Painted black. We'll have to work out something on getting me some 15" wheels and tires to let it rest on, but they don't have to be fancy, I'm scrapping the car when I'm done anyways. Make an offer.
-15x7" Aluminum snowflake rims, very nice shape, will ship from Texas where I live. Centercaps included: $150 obo
-Swaybars, springs, anything like that too, again, make an offer!
I will also be able to entertain offers for anyone who would like what's left when I'm done. I plan on keeping the doors, ground effects, and rear bumper cover with some of the trim for eventually finishing out the formula, but the rest is pretty much up for grabs. There is not a drop of rust in the entire car, period.
Wiring, sensors, belts, hoses, anything your heart desires and I'm not already using, just let me know. Lots of good interior parts as well. Gray colored interior, beautiful condition.
Shipping is tough for me, I can only get to where the car is stored on weekends. If you're willing to wait, I can get stuff out, but expect some delays because it all has to be pulled, brought over, and shipped, and I don't exactly have the least demanding schedule. It's located in Annapolis, just across the river from the Academy. I can do pickups most weekends. I also make trips on occasion down to Columbia, SC, and Roanoke, VA, so I would be willing to drop stuff off along the way to help on shipping the big stuff.
I need this stuff gone guys, if you've got an offer, shoot. I can send out pictures if anyone has a request. Interested in trades as well, I'm building up this Formula and I really might be interested in anything, try me!
Thanks again, looking forward to some interest,
-Levi
SOLD:
-EGR VALVE
-MAF
-TV Cable
-TPI Wiring Harness
-Oil Pressure Sending Unit
-Computer
Last edited by cal30_sniper; Oct 20, 2009 at 01:37 PM. Reason: Adding sold parts and updating prices.
Thread Starter
Member
iTrader: (16)
Joined: Dec 2006
Posts: 469
Likes: 1
From: TX/FL
Car: 88 GTA/86 C20 Burb/91 325i
Engine: L98/454/M20
Transmission: 700R4/NV4500/Getrag
Axle/Gears: 3.27 9-bolt/3.73 14 Bolt/3.73 IRS
Re: Parting out '87 Trans Am 305 TPI, Beautiful Condition Parts
Hmmm... I'm going to have to dig out the service manual just to find that one. I removed the AIR Pump and Lines when I put in the headers, but as long as it wasn't integral to that assembly, it should still be there. If you've got a picture you could post, or a description of where it's located/what it looks like, I can find it for you.
-Levi
-Levi
Thread Starter
Member
iTrader: (16)
Joined: Dec 2006
Posts: 469
Likes: 1
From: TX/FL
Car: 88 GTA/86 C20 Burb/91 325i
Engine: L98/454/M20
Transmission: 700R4/NV4500/Getrag
Axle/Gears: 3.27 9-bolt/3.73 14 Bolt/3.73 IRS
Re: Parting out '87 Trans Am 305 TPI, Beautiful Condition Parts
Here's two of when they were still on the car... I've got pictures from the previous owner of before they were painted, and they are very nice underneath. My guess would be you could leave them as is, or strip the paint off and go back to bare aluminum.


Senior Member
iTrader: (10)
Joined: Apr 2007
Posts: 773
Likes: 0
From: The Pocono Mountains, PA
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: Parting out '87 Trans Am 305 TPI, Beautiful Condition Parts
if it was an auto i need the tpi tv cable, throttle cable, wiring harness with complete computer shipped to 18428 pm me with price asap please
Joined: Feb 2008
Posts: 213
Likes: 1
From: Woodstock, GA
Car: 1989 IROC
Engine: 305 TPI
Transmission: T-5
Axle/Gears: 3.23
Trending Topics
Thread Starter
Member
iTrader: (16)
Joined: Dec 2006
Posts: 469
Likes: 1
From: TX/FL
Car: 88 GTA/86 C20 Burb/91 325i
Engine: L98/454/M20
Transmission: 700R4/NV4500/Getrag
Axle/Gears: 3.27 9-bolt/3.73 14 Bolt/3.73 IRS
Re: Parting out '87 Trans Am 305 TPI, Beautiful Condition Parts
Dropped some of the prices. Need stuff gone. If it seems high, make me a lowball offer and I might just take you up on it.
Thanks,
-Levi
Thanks,
-Levi
Member

Joined: Feb 2006
Posts: 168
Likes: 5
From: SoCal / Central Coast
Car: 1987 Chevy El Camino
Engine: 357 CID w/Lingerfelter Super Ram
Transmission: 700-R4
Axle/Gears: GN 8.5 342's
Re: Parting out '87 Trans Am 305 TPI, Beautiful Condition Parts
Steering Box?
Is it a WS6 car, and how many miles on it?
Thanks,
Dave
Is it a WS6 car, and how many miles on it?
Thanks,
Dave
Thread Starter
Member
iTrader: (16)
Joined: Dec 2006
Posts: 469
Likes: 1
From: TX/FL
Car: 88 GTA/86 C20 Burb/91 325i
Engine: L98/454/M20
Transmission: 700R4/NV4500/Getrag
Axle/Gears: 3.27 9-bolt/3.73 14 Bolt/3.73 IRS
Re: Parting out '87 Trans Am 305 TPI, Beautiful Condition Parts
Taillights are for sale, they are T/A units that I am pulling out of my Formula.
They are in nice shape except that the reflective tape strip at the bottom has been painted over black. It was a good job and looks nice, but it has been painted over.
Thanks,
-Levi
They are in nice shape except that the reflective tape strip at the bottom has been painted over black. It was a good job and looks nice, but it has been painted over.
Thanks,
-Levi
Supreme Member
Joined: Sep 2009
Posts: 1,319
Likes: 0
From: Tigard, OR
Car: 87 iroc-z camaro
Engine: 305TPI
Transmission: 700R4
Axle/Gears: G92 3.23 posi
Re: Parting out '87 Trans Am 305 TPI, Beautiful Condition Parts
how much do you want for the intake runners? are they in good condition? thx
Thread
Thread Starter
Forum
Replies
Last Post
The_Phoenix
Interior Parts for Sale
12
Feb 4, 2016 07:10 AM
drathaar907
History / Originality
4
Aug 10, 2015 07:44 AM






