Cam sold. I have the retro fit lifters for sale. $260 shipped.

 

Updated the page. Only part of it posted last night.

 

Nice to see ya trolling the boards again! Bump to a good guy and seller!

 

Thanks! Man I haven't talked to you in forever. Can you believe my block was decked wrong?! No wonder I drink.

 

I am looking for a direct bolt on to a '90 L98 TPI, center-bolt valve covers, EGR compatible. will these fit the bill?

thx

 

No I don't think they would work for you. The angle of the intake bolts are different on the 87 & up motors.

 

Now selling the retro fit lifters with the cam, updated price and the link.

Also selling Crane Gold 1.6 roller rockers 3/8 stud

 

I have some e-tec 200s with arp bolts if you are interested. I kinda like the cam you have but might go bigger.

 

Thanks for the offer but I think I have decided on the new AFR 220 Eliminator heads.

 

to the top

 

deleted post of heads

 

 

Heads sold. Everything else for sale.

 

I'm surprised you went larger than the 195s on your 406.. That is what talking to tony will do to you I guess

Not interested in selling the lifters separately? Already have that cam.


-- Joe

 

Tony talked me into a solid roller, 248/254 with the new 220 eliminator heads, a super vic intake and about 11:1 compression. He said it will still be streetable and make more power than the setup I had. I had no complaints about my previous setup. I have decided not to mod my 00' Firehawk and make this a little bit more of a "race street car" if that makes any sense.

If I can get someone to buy the cam I would split the two up but as of right now I would like to keep them together.

 

Hrmm.. Tony is right, it will make more power. The reason I like the 195s is they have higher velocity than the larger runner heads, which make driving sub 3500 rpm better (i.e, street).. However, the 220s will probably peak 20hp higher. I guess it depends on what you are looking for. You won't go slow with Tony's advice though, that is for sure.


My cost on comp 853-16 lifters is $324, so if you sell the cam separately and have the lifters for something cheaper than my cost let me know.


If you didn't buy your 220s yet, I can sell them hundreds cheaper than summit. Let me know the part #. If they are 1110 for example, I can probably do them for around $1850 plus shipping.

-- Joe

 

I will keep that in mind. That's a damn good price for the 220's. I am kinda worried about low rpm drivibilty. Streetable is a realitive term and means different things to different people.

I still want to be able to drive and enjoy the car. I guess I will find out exactly how big this combo is.

 

deleted.

 

to the top

 

lowered prices.

 

to the top

 

Only the roller rockers are for sale. I also have an extra set of retro roller lifters too.

 

What do you want for the roller rockers?

 

if you still have the cam, roller lifters, and rockers im very interested, can you quote me USPS to 09128(APO AE) Its NewYork Int. Airport for military to germany. dude its nice blowin by Beemers and Audis over here killin the green movment with my 87 Z28!..lol 2.73 gears, autobahn, 450 HP...you get the picture, holdnin it down in europe.
DJ

 

I decided to use them in a budget 383 build I am doing. I was selling everything to help fund my 400 project but I am in the process of buying a house so that's on hold.

I am selling the rocker arms. I am asking 250 shipped for those.

 

I am selling the retro fit cam and lifters again. I also dropped the price on the rockers. That is as cheap as I will go on the rockers.

 

rocker arms are sold.

 

ttt

 

Pics of lifters

 

Price dropped to 500 shipped.

 

It looks like I have the cam sold. I will sell the roller lifters $300 shipped.

 

bump

 

bump

 

bump

 

price dropped to 260 shipped. So thats 250 for the lifters and 10 bucks in a USPS flat rate box.

 

Still for sale. I can't believe this and my other retro fit cam/lifters haven't sold yet.

 

lifters sold.