Parting out a 2001 LS1 with about 80k. Decided to go a different direction with my build. Feel free to submit a reasonable offer for all parts. Pictures available upon request, and prices do not include shipping.


Coil packs/brackets/hardware ----- SOLD

Stock Throttle Body -------- SOLD

Stock pistons/rods $20 for each pair

Stock rockers/studs/rocker plate -------SOLD

Exhaust manifolds both for $50

Stock pushrods ------ SOLD

Stock MAF $30 -------- SOLD

241 heads with stock springs & valve covers(there is a broken manifold bolt in one and will have to be drilled out) $50 for the pair ------- SOLD

Front and rear engine covers $30 each

Stock crank pulley $30

Stock fuel rails and injectors ---------- SOLD

Stock frame mounts both for $30

LS1 BLOCK (Fresh from the machine shop. Washed, finish honed, new cam bearings. The boss for the air conditioning compressor bracket on the side of the block is broken.) ------ SOLD

4L60E W CONVERTER (Don't know much about it. Bought the engine and trans as a pullout. Had 80k on it.) make a reasonable offer, probably won't be refused.-----SOLD



SBC parts

Edelbrock shorty headers (air tubes welded) ------SOLD

Y-pipe -----SOLD

Torque converter for 700r4 (pretty sure its a 2200-2400 stall) $50

Stock torque arm with brand new mount bushing $25

 

TTT. Coil packs added...

 

Interested in the Y pipe and the coil packs with brackets... pics please to blang1970 at optonline.net

 

What about the complete serpentine set-up. Including water pump, alternator, power steering pump, A/C compressor, and all nuts bolts and brackets. What car did this come off of?
allen.bray64@yahoo.com

 

bonesbrakr -- Will send pics out in the morning time after I get home from work.

abray1 -- I'm keeping all the brackets/accessories so I can throw them on a 5.3. Everything came off a 2001 SS.

 

Location?

Ill the long block if you're not too far away

 

Little Rock, Arkansas

 

Too far for me. Good price though, the AR guys should ****** that up

 

shipping for headers and y pipe to sumner iowa 50674

 

PM sent

 

Shipping on block to 62294 and pics of the dmg area. What all machine work has been done? Did the block check out fine etc? Any info would be appreciated.

 

Not shipping the block, pick up or meet up within reasonable distance.

 

interested in headers and y pipe are they still available? if so how much shopped to 18631?

 

Probably not going to be cheap, the ypipe will be hard to package. If you want pics shoot me your email.

 

TTT. Someone needs some cheaply priced headers...

 

shipping to 18631 on the headers? i'll even take the ypipe if you gotta cut it in half to fit it in the box with the headers

 

got the headers the other day.. thanks for the great deal and the super fast shipping