Aeromotive a1000 fuel pump/filter.
09-28-2010, 11:18 PM
#1
Aeromotive a1000 fuel pump/filter.
800lb/hr at 50psi...
Came out of a 9sec GN with only a few passes on it. He thought the pump went bad and sent it off to Aeromotive for a rebuild and bought an a1200 to replace it, turned out there was another issue, but the pump was rebuilt regardless and sold it to me - I'm not the knuckle head that used a Channel-Lock on it lol, only cosmetic, though.
Taking a loss at $250 shipped to the US.
EDIT: Tial WG doesn't go with lol.
Car it came out of..
http://www.youtube.com/watch?v=gjmkt90-S6E
Came out of a 9sec GN with only a few passes on it. He thought the pump went bad and sent it off to Aeromotive for a rebuild and bought an a1200 to replace it, turned out there was another issue, but the pump was rebuilt regardless and sold it to me - I'm not the knuckle head that used a Channel-Lock on it lol, only cosmetic, though.
Taking a loss at $250 shipped to the US.
EDIT: Tial WG doesn't go with lol.
Car it came out of..
http://www.youtube.com/watch?v=gjmkt90-S6E
Last edited by firstfirebird; 09-29-2010 at 12:11 AM.
09-29-2010, 07:37 AM
#2
Member
iTrader: (6)
Join Date: Feb 2000
Location: Valley Center,Kansas
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92RS
Engine: LS 402 inwork
Transmission: TH350
Axle/Gears: 10 bolt,3:73's
Re: Aeromotive a1000 fuel pump/filter.
Willing to sell that filter alone? I'd give ya $50 for it.
09-29-2010, 09:11 AM
#3
10-04-2010, 03:42 PM
#6
Re: Aeromotive a1000 fuel pump/filter.
Well we placed 3rd overall at the Challenge!
Came in 2nd at the Auto-x, has a best run of 33sec, only to get beaten by a Lexus V8-powered Miata.
Took 3rd in the car show, and had a best drag run of 12.36@117mph which placed us 5th in the straights. Not too bad for a 2.5l i6 @ 21psi and we only had DOT Hoosiers with super stiff sidewalls
We blew the HG on the 175k mile motor, though, could have gotten in the 10's if we tweaked the launch a little better.
Here's the car we built for $1962
and the other car that came specifically to beat us. It's the same late 80's BMW 325is, but they tried out-powering us with an lm7 (iron block ls1)...
Come take a ride in the car....
Here's the 1st pass at 12.9 and the second pass at 12.3 where we lost the hood, it actually sailed OVER the scoreboard at the trap lites haha...
http://www.justin.tv/condorspeedshop/b/271142069
And here you can see the run on the auto-x, where even the driver was so surprised at the power we were making lol...
http://www.justin.tv/condorspeedshop/b/271088055
Sending PM's now...
Came in 2nd at the Auto-x, has a best run of 33sec, only to get beaten by a Lexus V8-powered Miata.
Took 3rd in the car show, and had a best drag run of 12.36@117mph which placed us 5th in the straights. Not too bad for a 2.5l i6 @ 21psi and we only had DOT Hoosiers with super stiff sidewalls
We blew the HG on the 175k mile motor, though, could have gotten in the 10's if we tweaked the launch a little better.Here's the car we built for $1962
and the other car that came specifically to beat us. It's the same late 80's BMW 325is, but they tried out-powering us with an lm7 (iron block ls1)...
Come take a ride in the car....
Here's the 1st pass at 12.9 and the second pass at 12.3 where we lost the hood, it actually sailed OVER the scoreboard at the trap lites haha...
http://www.justin.tv/condorspeedshop/b/271142069
And here you can see the run on the auto-x, where even the driver was so surprised at the power we were making lol...
http://www.justin.tv/condorspeedshop/b/271088055
Sending PM's now...
Thread
Thread Starter
Forum
Replies
Last Post
92camaroJoe
Tech / General Engine
6
08-13-2015 06:07 AM
