I have a TPI setup from a 91 camaro 305. This comes with the ECM, wire harness, and the complete tpi system with a hypertech airfoil and a helix throttle spacer. I did feel the little power those parts gave. It has a brand new map sensor and egr valve, not to mention this is a speed density system. The injectors are bad and that is the reason why i pulled the system off the engine. They sell the bosch 3 injectors at southbayfuelinjectors.com for i think 125. 200 + shipping for the complete system and i will even include the distributor and cap that was replaced not to long ago. Only other thing that you will need is a water neck gasket since i cleaned the base and removed it.

 

Bump

 

Heres some more pics.......Look at the last few posts, i cleaned the system!

 

How much just for the harness? If you were to part it from the system.

 

Id sell it for 125 plus shipping

 

how much for the intake

 

200 OBO

 

Would I be able to use your ecm, or did you have vats removed from it or would I need your key.

 

I did have vats removed but i will provide a key. I wont part the ecm from the wire harness though, i want to keep it all together

 

How much for the harness and ecm together? and what would be shipping to Iowa you think.

 

The harness + Ecm and key i will sell for 125 and add 20 for shipping. I want to be on the safe side with the shipping since i never have shipped something that heavy before. If it totals out to more than 20 ill pay out of my pocket for the rest.

 

I will be getting a hold of you soon!

 

Sounds good just PM me for my info

 

I am toying with the idea of building a 350 4-bolt for my wifes Jeep. I have the motor and 2 new thruster ecu's to use but I have a couple of quick questions before we strike a done deal though. The price isn't an issue if all of the sensors are included. I have a full set of newly rebuilt 30lb Bosch III injectors so that should solve that issue. What shape is the harness in and is it a Gen6 or 7? What kind of distributor does this come with... a dual sync? Is there an O2 and/or knock sensor with this?? Is the system complete minus the thermostat housing? If you can please drop me line or txt to discuss. I have sent my contact info to you via PM. Thanks

 

Bump...make offers, will sell the air foil or spacer seperate.

 

How much for the air foil and how much for the spacer? Or both.

 

Make an offer

 

Heres some more pics, except i spent all day cleaning it. Im still not finished cleaning

 

.

 

Honestly if someone is interested in this unit i will sell the complete system for 250 + shipping.

 

Im to the point where i just need this gone. Im selling everything listed for 200 + the shipping cost. Thats probably the cheapest system you will find, all that it needs are new injectors and the thermostat with gasket.

 

How much would shipping be to 76301. Did I read right that this is vats delete and otherwise complete ready to bolt on w/ new gaskets and injectors?

 

The total comes to 44.79 https://www.fedex.com/ratefinder/sta...=getQuickQuote . Yes it had a vats delete, it has all the gaskets but the water neck gasket and you need a new thermostat and injectors. That was my stalling problem from those bad injectors.

 

Thanks for the quick replies and with the last info I requested I will buy this.

 

Sounds good, just PM the info. Thanks

 

Sold? Or still available?

If available I'll take it. Just lemme know.

 

Sale is pending

 

If available i will purchase now please advise thanks.

 

Sold

 

This TPI system just arrived today well packaged and just as described. I am very satisified.