Hey guys we got this motor from a project car that was abandon. Everything is new never fired. Here are the details
.030 over 350
Eagle rotating assembly PN: B13202E030
cast steel 3.48 stroke crank
forged 5140 steel rods
hypereutectic flat top pistons
2piece rear main seal
Comp Cams 12-365-4
1500-5500 rating
216-intake 223-exhaust duration @.050
260-intake 272-exhaust duration advertised
.499-intake .493-exhaust lift with 1.5 rocker
113 LSA
hydraulic flat tappet good low end & mid range for tpi 350 with
chip and exhaust upgrade
Dart iron eagle
180 cc intake runners
75 cc exhaust runners
64 cc combustion chambers
2.02-inake 1.60-exhaust valves
hydraulic flat tappet springs good to .520 lift
Edelbrock Pro-Flo injection complete setup

Motor should be around 10 to 1 compression. Motor was professionaly built and never fired. Hope this answers any questions about the build but please feel free to ask. The price $3000 with everything in the pics or $2000 without the injection.

 

more pics

 

3more

 

and the last pic

 

I do have an ATI Super Street Damper to go with this as well since the original was sold with the pulleys. It only has a couple hundred miles on it tops and its from my last engine build for the street. These are rebuildable so you can upgrade to a Super Damper in the future. Also I have a Performer Air-Gap Intake PN 2601 that matches the cam in this motor perfect for anyone not wanting the injection. The intake is from the same motor as the ballancer I will clean it up for the buyer. Sorry about the pics of the damper I tried to clean it with some brake clean and apperantly thats a no no because it wiped the print off of it.

 

hey guys any feed back? Price to high? To good to be true? No way to pick it up? Any input on where I might have better luck? Just want to unload this and thought the price was good for a turnkey FI setup.

 

I dont really think thier is anything neccesarily wrong with your posting. Just as a whole america is broke. Maybe a person who can actually afford it doesnt need it. Maybe a bunch of people want it but cant afford it. I wish you the best of luck selling this though! Looks like a nice setup.

 

curious to what youd sell just the injection set-up for? could also provide edelbrock intake/holley carb set up for a replacement for the motor

 

pm sent GTFiero

 

bump happy 4th of july

 

TTT

 

What part of PA and would a tpi setup bolt to that engine

 

Im in Lancaster county. I have a truck so i could definatly help out with delivery. The only thing that would be a problem is the verry center intake bolts. They have a different angle. I have heard of people modifying thier intakes to fit early style heads. Everything else should bolt on no problem.

 

TTT

 

TTT

 

pm me if you got the pro-flo still.

 

Hey guys just to avoid anymore confusion the pro flo is a pro-flo 1 not the most recent pro-flo 2

 

Any offers? No one within driving distance is looking for a good strret motor?

 

TTT Good motor anyone on here have a reasonable offer?

 

How much for just thepro flo setup?

 

Ive been asking 1250. This is a pro-flo1 not the later Pro-Flo2. The price includes everything that came in the box from edelbrock and the HEI pictured above. This is complete and never had fuel in the system

 

BUMP

 

want this thing gone $3000 for all of it taking offers. this thing is ready to run add your pulleys and headers break in the cam and go beat the hell out of it.

 

bump. any trades??? looking for a tig welder, low speed metal cutting band saw, forced induction stuff...

 

ttt

 

bump

 

bump

 

bump any intrest in the injection / heads / shorblock? If so make an offer.

 

Takin the motor to Maple Grove swap meet on the 22nd if anyone is interested.