I have supplied part numbers for eveything , i live in Windsor Ontario . Everything is in good shape , i can supply references if needed . The shipping will have to be an added cost unless picked up of coarse an always open to offer's . TKS

T-Bolt Clamp 4 " ID ( 8 pc's ) $ 2 each
Rubber Hump Hose 4 " ID ( 2 pc's ) $ 10 each
D.U.I. Distributor #12620 plus coil #31723 plus Accell race wires #7048 $ 200

 

vortec intake meaning, a 4bbl intake?

 

FIRST TPI for Vortec

 

Might be interested in a few of those, but the 12620 is only $199 new at summit?

 

Yes you are right about summit but in my case for warranty i had to buy Canadian an their was only one dealer in my area . Like i said i'am always open to offer's TKS

 

any pics of the headers?

 

Yep here ya go

 

what lb/hr injectors are those?

 

I updated the list for the injectors

 

Do you know how much milage is on the injectors and the coil / distri? Also, the coil is for the later-model style HEI right, remote coil?

 

You did not specify what set of injectors .The 55 lb injectors approx 60,000 miles they where my originals an the 65 lb injectors i bought reconditioned have 100 miles the 90 lb injectors i bought new an have 5,000 miles . The LT1 injectors i bought new an have 10,000 miles . The DUI stuff i bought new an have 5,000 miles on them an yes the coil is remote matching the dizzy for that model .

 

well, i dids look above.
and btw, are these prices in canadian dollar or US?

edit: should've read your post in entirety before replying.. thanks for the info!

Can you find out how much shipping to 8020 in Austria would approx. come out at? Never had stuff shipped from Can so don't have a clue.
I'm interested in the distri, coil and lt1 injectors, and prolly the fuel gauges. btw, the flow matching on the lt1s is from the time of purchase?

 

The prices are Canadian dollar , i will get some pricing for you on the shipping . Yes the LT1's where flow matched at time of purchase .

 

Do you have both springs for the Aeromotive regulator?

 

what are the tube diameters of the headers?

 

tubing is 1.5 dia the collector is 2.5 dia .

 

Yes i have both springs

 

PM,d.

 

I bought the TBI adapter. Just giving everyone a heads up that sale went through with no problems.

 

Bump

 

ill take the 65lb injectors, PM me paypal info and everything

 

the injectors were 90 lb flow matched at what PSI? those are stock injectors out of a 454 basically correct?

 

I bought these new from CFM Tech an are very hard to find except for the dealer . Yes these are BBC injectors flow matched @ 13.5 PSI .

 

bump

 

PM sent