Level 10 7004r for high HP street/strip
Thread Starter
Joined: Jul 1999
Posts: 666
Likes: 15
From: Freehold, NJ
Car: 1991 Formula
Engine: 434
Transmission: PG
Axle/Gears: 4.33
Level 10 7004r for high HP street/strip
I am selling my current setup - 7004r built by level 10 performance in Hamburg, NJ
The trans has about 2 seasons on it of occasional drag use and some street. All totaled is 80 miles.
The car it was in is a 1991 Formula with 406 solid roller motor. Car weighs 3600 and runs 11.6's. The trans is currently out of the car. The car launched with a 1.5x 60' time and I have had no problems at all with the trans.
Here is a pic of the car with the 700r4 in it with 4.56 gears and 3800 stall.
As you can see, trans held up to high HP/TRQ without problems.

The trans has the best of everything in it. Cost me $2300 to get it done.
asking $950 or best offer for trans. I am going to an ATI TH350 with 8" stall, hence the reason for the sale.
Here is link to the shop that did the trans work for me:
http://www.levelten.com/Level_10_PTS...1800-7000s.htm
The trans has about 2 seasons on it of occasional drag use and some street. All totaled is 80 miles.
The car it was in is a 1991 Formula with 406 solid roller motor. Car weighs 3600 and runs 11.6's. The trans is currently out of the car. The car launched with a 1.5x 60' time and I have had no problems at all with the trans.
Here is a pic of the car with the 700r4 in it with 4.56 gears and 3800 stall.
As you can see, trans held up to high HP/TRQ without problems.

The trans has the best of everything in it. Cost me $2300 to get it done.
asking $950 or best offer for trans. I am going to an ATI TH350 with 8" stall, hence the reason for the sale.
Here is link to the shop that did the trans work for me:
http://www.levelten.com/Level_10_PTS...1800-7000s.htm
Supreme Member
Joined: Feb 2006
Posts: 1,366
Likes: 1
From: St.Louis, IL
Car: 1988 Camaro
Engine: 377
Transmission: TH350; Circle D 4200 converter
Axle/Gears: Ford 9"
Re: Level 10 7004r for high HP street/strip
Bad link at the bottom. Are you willing to ship the transmission? Who made the converter? Do you have paperwork to prove the work done to it?
Thread Starter
Joined: Jul 1999
Posts: 666
Likes: 15
From: Freehold, NJ
Car: 1991 Formula
Engine: 434
Transmission: PG
Axle/Gears: 4.33
Re: Level 10 7004r for high HP street/strip
I am willing to ship, but I honestly don't know what it would cost.
The converter was a Precision Industries Vigilante 9.5" (3800 stall) but is already sold.
I contacted the shop that did the work and they are providing me with a detailed invoice versus amount charged and paid stamp. It should list the clutches, pump, valvebody etc.
The converter was a Precision Industries Vigilante 9.5" (3800 stall) but is already sold.
I contacted the shop that did the work and they are providing me with a detailed invoice versus amount charged and paid stamp. It should list the clutches, pump, valvebody etc.
Thread Starter
Joined: Jul 1999
Posts: 666
Likes: 15
From: Freehold, NJ
Car: 1991 Formula
Engine: 434
Transmission: PG
Axle/Gears: 4.33
Re: Level 10 7004r for high HP street/strip
Just recieved the invoice from Level10. Here is working link to the trans with the current cost.
http://www.levelten.com/Level_10_PTS...m1800-7000.htm
http://www.levelten.com/Level_10_PTS...m1800-7000.htm
Joined: Feb 2001
Posts: 752
Likes: 19
From: Westminster, MD USA
Car: 91 Firebird 'vert, 91 Formula
Engine: 5.7, 5.0
Transmission: T56, T5
Axle/Gears: Auburn w/ 3.73's, 3.42
Re: Level 10 7004r for high HP street/strip
I am willing to ship, but I honestly don't know what it would cost.
The converter was a Precision Industries Vigilante 9.5" (3800 stall) but is already sold.
I contacted the shop that did the work and they are providing me with a detailed invoice versus amount charged and paid stamp. It should list the clutches, pump, valvebody etc.
The converter was a Precision Industries Vigilante 9.5" (3800 stall) but is already sold.
I contacted the shop that did the work and they are providing me with a detailed invoice versus amount charged and paid stamp. It should list the clutches, pump, valvebody etc.
Trending Topics
Member
iTrader: (8)
Joined: Mar 2007
Posts: 343
Likes: 1
From: Shreveport Louisianna Barksdale AFB
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: Level 10 7004r for high HP street/strip
Hey fastbird where at in jersey? Im currently back up here till my transfer from reserves to active duty in may goes thru and this is exactly what I need for my car.
Pm me your bottom dollar maybe we can make a deal asap
Pm me your bottom dollar maybe we can make a deal asap
Member
iTrader: (8)
Joined: Mar 2007
Posts: 343
Likes: 1
From: Shreveport Louisianna Barksdale AFB
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: Level 10 7004r for high HP street/strip
Hey if my memory serves right I think I bought your 85 camaro last time i was up here with the 3.4 in it, 2 12's and sunroof?
Junior Member
iTrader: (1)
Joined: Sep 2011
Posts: 16
Likes: 0
From: westchester ny
Car: 1990 TA
Engine: 350 in the works
Transmission: th700r
Axle/Gears: 10 bolt Eaton Posi 373
Re: Level 10 7004r for high HP street/strip
Can you PM me a copy of the invoice ? Thanks, Patrick
Junior Member
iTrader: (1)
Joined: Sep 2011
Posts: 16
Likes: 0
From: westchester ny
Car: 1990 TA
Engine: 350 in the works
Transmission: th700r
Axle/Gears: 10 bolt Eaton Posi 373
Re: Level 10 7004r for high HP street/strip
p
Last edited by plemon90ta; Apr 2, 2012 at 05:56 PM. Reason: dont want to post email address
Thread Starter
Joined: Jul 1999
Posts: 666
Likes: 15
From: Freehold, NJ
Car: 1991 Formula
Engine: 434
Transmission: PG
Axle/Gears: 4.33
Re: Level 10 7004r for high HP street/strip
Will take $900. Need to finance next project, but not willing to give it away either. You can not build this trans for what i am asking.
Thread Starter
Joined: Jul 1999
Posts: 666
Likes: 15
From: Freehold, NJ
Car: 1991 Formula
Engine: 434
Transmission: PG
Axle/Gears: 4.33
Re: Level 10 7004r for high HP street/strip
Still have it.
Lot of tire kickers and people asking how much it would be to ship to Durkdurkstan....
But yes, I still have the trans and would be willing to deal.
Lot of tire kickers and people asking how much it would be to ship to Durkdurkstan....
But yes, I still have the trans and would be willing to deal.
Thread
Thread Starter
Forum
Replies
Last Post









