[KY] 350 TPI Engine for sale (Speed Density) Must See to appreciate! Price drop!
06-18-2012, 09:11 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2002
Location: Lexington, Ky
Posts: 95
Likes: 0
Received 3 Likes
on
2 Posts
Car: 91 Camaro Z28
Engine: LS1
Transmission: 4L60E
Axle/Gears: 3.42 Posi Disc
350 TPI Engine for sale (Speed Density) Must See to appreciate! Price drop!
Engine for Sale $2500 (Price drop from $3500)
I am selling a small block Chevy TPI engine that has approx. 600 miles on the short block and the speed density tuned port setup. The engine was in my 88 Camaro. Decided I wanted something more than stock and pulled the engine and added a bunch of upgrades. Most all parts on the engine have been replaced or rebuilt. No EGR. Here is a list of the parts and specs. Last fall I purchased a 91 Z28 with a LS1 and 4L60E show quality. (This Engine No Longer Needed) Will Not Part Out!
Tuned Port (Speed Density)
5.7Liter 350 Bored .030 over ( 1st Gen Block) Painted Black Eastwood Engine Enamel
Cast Crank
Stock Rods
Keith Black Hypereutectic Pistons (Flat Top with 4 valve reliefs)
Competition Cam
Hi Volume Oil Pump
Double Roller Timing Chain and Gears
World Products Sportsman II Cylinder Heads (72cc, Fast Burn, Straight Plug, 200cc Intake Runner )
Pro Chrome Molley Push Rods
Manley Stainless Steel Valves (2.02 and 1.60)
Screw in Studs and Guide Plates
ProForm Extruded Aluminum Full Roller Rockers (1.5 ratio, Blue in color)
GM Performance Competition Valve Covers with Billet Aluminum Oil Baffles
Edelbrock Hi Flo TPI Runners
Summit Twin 58MM Satin Throttle Body (ported to plenum)
28lb Ford SVO Injectors (Cleaned, Rebuilt and Flo matched by Southbay)
Hedman Shorty Headers (Ceramic Coated, Still in Plastic)
Summit Chrome High Torque Mini Starter
March Performance Serpentine Pulley Set
Pro Street Harmonic Damper
Powermaster Chrome Alternator (One Wire, 105amp)
Billet Aluminum Fuel Pump Block Off
Billet Aluminum EGR Block off
Fuel Rails have been rebuilt with new O-ring sets
BBK Adjustable Fuel Pressure Regulator
New Water Pump
Power Steering was rebuilt after Powder Coating Housing
Gates Belts
Most sensors have been replaced
All bolts externally have been replaced with stainless steel bolts were applicable and exposed to the elements. TPI Runners, Plenum and intake, fuel rails, thermostat housing, Valve Covers have been powder coated reflective chrome or translucent red with clear top coat. Many hours of work and detailing went into this engine over a year and half time. The engine has been covered on a stand for
approx. 2 years while rebuilding and upgrading. Lots of extras too much to mention.
Needs: Distributor, Plugs, Plug Wires (See Pictures)
I have over $4000 in parts alone. Will accept serious offers only! Must see to appreciate!
I am selling a small block Chevy TPI engine that has approx. 600 miles on the short block and the speed density tuned port setup. The engine was in my 88 Camaro. Decided I wanted something more than stock and pulled the engine and added a bunch of upgrades. Most all parts on the engine have been replaced or rebuilt. No EGR. Here is a list of the parts and specs. Last fall I purchased a 91 Z28 with a LS1 and 4L60E show quality. (This Engine No Longer Needed) Will Not Part Out!
Tuned Port (Speed Density)
5.7Liter 350 Bored .030 over ( 1st Gen Block) Painted Black Eastwood Engine Enamel
Cast Crank
Stock Rods
Keith Black Hypereutectic Pistons (Flat Top with 4 valve reliefs)
Competition Cam
Hi Volume Oil Pump
Double Roller Timing Chain and Gears
World Products Sportsman II Cylinder Heads (72cc, Fast Burn, Straight Plug, 200cc Intake Runner )
Pro Chrome Molley Push Rods
Manley Stainless Steel Valves (2.02 and 1.60)
Screw in Studs and Guide Plates
ProForm Extruded Aluminum Full Roller Rockers (1.5 ratio, Blue in color)
GM Performance Competition Valve Covers with Billet Aluminum Oil Baffles
Edelbrock Hi Flo TPI Runners
Summit Twin 58MM Satin Throttle Body (ported to plenum)
28lb Ford SVO Injectors (Cleaned, Rebuilt and Flo matched by Southbay)
Hedman Shorty Headers (Ceramic Coated, Still in Plastic)
Summit Chrome High Torque Mini Starter
March Performance Serpentine Pulley Set
Pro Street Harmonic Damper
Powermaster Chrome Alternator (One Wire, 105amp)
Billet Aluminum Fuel Pump Block Off
Billet Aluminum EGR Block off
Fuel Rails have been rebuilt with new O-ring sets
BBK Adjustable Fuel Pressure Regulator
New Water Pump
Power Steering was rebuilt after Powder Coating Housing
Gates Belts
Most sensors have been replaced
All bolts externally have been replaced with stainless steel bolts were applicable and exposed to the elements. TPI Runners, Plenum and intake, fuel rails, thermostat housing, Valve Covers have been powder coated reflective chrome or translucent red with clear top coat. Many hours of work and detailing went into this engine over a year and half time. The engine has been covered on a stand for
approx. 2 years while rebuilding and upgrading. Lots of extras too much to mention.
Needs: Distributor, Plugs, Plug Wires (See Pictures)
I have over $4000 in parts alone. Will accept serious offers only! Must see to appreciate!
Last edited by kyrenegade; 03-29-2014 at 10:55 AM. Reason: No interest or serious offers!
06-18-2012, 09:15 PM
#2
Junior Member
Thread Starter
Join Date: Feb 2002
Location: Lexington, Ky
Posts: 95
Likes: 0
Received 3 Likes
on
2 Posts
Car: 91 Camaro Z28
Engine: LS1
Transmission: 4L60E
Axle/Gears: 3.42 Posi Disc
Re: 350 TPI Engine for sale (Speed Density) Must See to appreciate!
More pictures!
Last edited by kyrenegade; 06-18-2012 at 09:22 PM.
The following users liked this post:
HEAVY1955 (10-22-2021)
06-18-2012, 09:31 PM
#3
Senior Member
iTrader: (5)
Join Date: Apr 2008
Location: Putnam Valley, NY
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 RS 6spd
Engine: Carbed 357c.i.
Transmission: Built T56
Axle/Gears: Soon to be Strange S60
Re: 350 TPI Engine for sale (Speed Density) Must See to appreciate!
It really is art.
07-05-2012, 01:50 PM
#5
Junior Member
Thread Starter
Join Date: Feb 2002
Location: Lexington, Ky
Posts: 95
Likes: 0
Received 3 Likes
on
2 Posts
Car: 91 Camaro Z28
Engine: LS1
Transmission: 4L60E
Axle/Gears: 3.42 Posi Disc
Re: 350 TPI Engine for sale (Speed Density) Must See to appreciate!
Had a few offers but nothing solid. Drop price to $2800. My big loss your gain!
07-10-2012, 01:08 PM
#6
Supreme Member
Join Date: Aug 2011
Location: Aloha, Oregon
Posts: 1,178
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Christine Z28
Engine: RV Cam and Intake 350 SBC
Transmission: 5speed
Axle/Gears: 3.08 ls Posi
Re: 350 TPI Engine for sale (Speed Density) Must See to appreciate! Price drop!
VERY NICE! Wish I could afford it!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
colton_carlson
Firebirds for Sale
7
03-08-2019 12:21 PM
The_Phoenix
Engine/Drivetrain/Suspension Parts for Sale
7
09-03-2015 10:56 PM
