Borla Xr1 Racing mufflers, X pipe Kit, and 87 Iroc Seats
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Aug 2012
Location: brazoria county TX
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Car: '76 LT, '87 IROC
Borla Xr1 Racing mufflers, X pipe Kit, and 87 Iroc Seats
Hey everyone, Well i had an amazing idea of putting together an exhuast system on my 87 iroc but becuase of tight ground clearence and my subframe connectors, i had to instead use a custom Y pipe and my original catback setup, leaving the new mufflers, and X pipe kit unusable.
so im here trying to sell them, the borla mufflers are brand spankin new, and have only been on the car when it was on jacks and were bolted on the pipes not welded, and they sound amazing, but due to the ground clearence, i had to raise the car back up and take them back off.
I also have a universal X pipe kit with 4-45 bends and an X pipe splitter, also with the bolts to connect them. these were only used for about a week, but theres nothing wrong with them.
im letting all of this go for cheap i want to get it out of the house since christmas is around the corner, im sure someone out there can get the set up to work or better yet use them for another car or project.
So:
2 - Borla XR 1 Racing mufflers 3" inlet and outlet by 16 inches long """$100 each"""
3" Summit Racing universal Xpipe system """$50.00"""
I also have my original 87 iroc front seats, cloth and grey with camaro lettering, nothing wrong with them i switched them out with seats from a 98 Z28. """$100""" if bought together or """$75""" for one.
Cat converter for an 87 camaro, $25. ill get pics of this later
Stock Manifolds with the air tubes for a 350 tpi $25 for the pair. will get pics later
Prices dont include shipping.
*****i will trade the mufflers or kit whichever for a complete set of SLP runners for an 87 350 tpi
so im here trying to sell them, the borla mufflers are brand spankin new, and have only been on the car when it was on jacks and were bolted on the pipes not welded, and they sound amazing, but due to the ground clearence, i had to raise the car back up and take them back off.
I also have a universal X pipe kit with 4-45 bends and an X pipe splitter, also with the bolts to connect them. these were only used for about a week, but theres nothing wrong with them.
im letting all of this go for cheap i want to get it out of the house since christmas is around the corner, im sure someone out there can get the set up to work or better yet use them for another car or project.
So:
2 - Borla XR 1 Racing mufflers 3" inlet and outlet by 16 inches long """$100 each"""
3" Summit Racing universal Xpipe system """$50.00"""
I also have my original 87 iroc front seats, cloth and grey with camaro lettering, nothing wrong with them i switched them out with seats from a 98 Z28. """$100""" if bought together or """$75""" for one.
Cat converter for an 87 camaro, $25. ill get pics of this later
Stock Manifolds with the air tubes for a 350 tpi $25 for the pair. will get pics later
Prices dont include shipping.
*****i will trade the mufflers or kit whichever for a complete set of SLP runners for an 87 350 tpi
Last edited by ligerzero5621; 11-12-2012 at 07:05 PM.
#3
Member
Join Date: Dec 2010
Location: Milledgeville, GA
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro Z28
Engine: L98
Transmission: 86' 700R4
Axle/Gears: 10 Bolt, 3.42's
Re: Borla Xr1 Racing mufflers, X pipe Kit, and 87 Iroc Seats
Dude, Solis....you didn't get any sound bits?
#4
Junior Member
Thread Starter
iTrader: (2)
Join Date: Aug 2012
Location: brazoria county TX
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Car: '76 LT, '87 IROC
Re: Borla Xr1 Racing mufflers, X pipe Kit, and 87 Iroc Seats
Naw man I should of though. But they sound really good I had them on with my new longtube headers also.
#5
Member
Join Date: Dec 2010
Location: Milledgeville, GA
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro Z28
Engine: L98
Transmission: 86' 700R4
Axle/Gears: 10 Bolt, 3.42's
Re: Borla Xr1 Racing mufflers, X pipe Kit, and 87 Iroc Seats
I'd be interested in the x-pipe, only downside is I'd have to wait till a real paycheck. How much is it to ship that monstrosity?
#6
Junior Member
Thread Starter
iTrader: (2)
Join Date: Aug 2012
Location: brazoria county TX
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Car: '76 LT, '87 IROC
Re: Borla Xr1 Racing mufflers, X pipe Kit, and 87 Iroc Seats
Well I still have the original box that the pipes came in when I got it from summit so ill use that, ill look online an see how much it weighs and use that as a quote shipping and ill get back with you.
Trending Topics
#8
Member
Join Date: Dec 2010
Location: Milledgeville, GA
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro Z28
Engine: L98
Transmission: 86' 700R4
Axle/Gears: 10 Bolt, 3.42's
Re: Borla Xr1 Racing mufflers, X pipe Kit, and 87 Iroc Seats
Awesome dude, I appreciate it.
#10
Member
Join Date: Dec 2010
Location: Milledgeville, GA
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro Z28
Engine: L98
Transmission: 86' 700R4
Axle/Gears: 10 Bolt, 3.42's
Re: Borla Xr1 Racing mufflers, X pipe Kit, and 87 Iroc Seats
Solis, you still have that X-Pipe?
#11
Junior Member
Thread Starter
iTrader: (2)
Join Date: Aug 2012
Location: brazoria county TX
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Car: '76 LT, '87 IROC
Re: Borla Xr1 Racing mufflers, X pipe Kit, and 87 Iroc Seats
Sorry guys my Internet was off for awhile... Everything is sold except the front seats.
Sorry for the delay
Sorry for the delay
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM
mustangman65_79
Body
3
08-11-2015 03:17 PM