So i put this motor together a few months ago. The rings didn't seat and she was burning oil, so after about 500 miles i pulled the motor for a rebuild. Decided to go with an Ls1 now, so all my like new parts need to be sold. Heres the list:

One set of Dart SHP 127122 Aluminum heads. Set up for a roller cam, number one spark plug has been tapped and an insert has been installed due to the plug threads getting stripped from a compression tester during the ring diagnosis. Bought new, both have less than 1000 miles. Make an offer- Paid 1000.00 shipped from summit.


Comp Cams XR276HR retrofit hydraulic roller cam with a comp double roller timing set. Also less than 1000 miles, bought new.- Make an offer- Paid 300.00.

Aluminum timing cover for use with a cam button, chevy logo on the front.

Edelbrock performer RPM airgap intake manifold- Make an offer, paid 230.00

Set of headman headers, ball and socket flange. I believe i paid around 180.00

Brand new LT1 t-56 RAM clutch, brand new still sealed. Paid 450.00

Set of comp cams 1.6 aluminum roller rockers, i think i paid around 180.00

Set of Howard Cams retrofit hydraulic roller lifters, paid 340.00 new

Set of comp cams 7609 magnum push rods, paid around 100 bucks.

I also have a summit billet male non HEI vacuum advance distributer, which was around 200 bucks.

And lastly i have a t56- LT1 bell housing and an LT1 flywheel. Flywheel has never been cut.

So if anyone is interested shoot me an offer shipped with you're zip code please. I bought all these parts new less than a year ago, Im not expecting to break even, just want to cut you guys a good deal and get some cash together for the ls1 swap

Pics coming in a few….

 

 

 

 

Thats everything, sorry for some of the large pics, couldn't get them to size down towards the end for some reason.

 

Pm sent

 

Lifters, pushrods, timing cover sold

 

Intake manifold sold.

 

Cam sold..

 

Are the roller rockers non-self-aligning?

 

Yep, non self aligning 1.6 ratio.

 

Non sa, you Christmas shopping for me Gary lmao

 

Heads sold..

 

clutch sold...

 

Just curious if the bell housing is still available ...... long shot

 

Timing chain cover to 48184 . Thnx