[PA] '89 TPI parts,MAF,serpentine,etc
#1
'89 TPI parts,MAF,serpentine,etc
I'm really starting to trip over some of this 350 TPI parts from my '89 GTA that's getting the LS swap.
So I'm gonna purge some of this stuff,
Starting with the original air intake systems complete with working MAF sensor, and K&N filter $100
TPI throttle cable-$15
Cruise control servo/cable $30
Like I mentioned I have the serpentine system,it maybe missing some hardware.but all the big parts are there right down to A.I.R. pump.
I have hard and soft A/C lines too.
I don't have pictures of everything, but can get them if needed.
I'll try and be reasonable with prices so if you need something just ask, I may have it.
I do have the TPI set up, but some of the small parts were scavenged for an HSR that I had.
So I'm gonna purge some of this stuff,
Starting with the original air intake systems complete with working MAF sensor, and K&N filter $100
TPI throttle cable-$15
Cruise control servo/cable $30
Like I mentioned I have the serpentine system,it maybe missing some hardware.but all the big parts are there right down to A.I.R. pump.
I have hard and soft A/C lines too.
I don't have pictures of everything, but can get them if needed.
I'll try and be reasonable with prices so if you need something just ask, I may have it.
I do have the TPI set up, but some of the small parts were scavenged for an HSR that I had.
Last edited by W72; 02-04-2015 at 08:57 PM.
#4
Re: '89 TPI parts,MAF,serpentine,etc
some more stuff...make offers?
driveshaft not for sale
I think I have all the lines for oil cooler too.
evap,box is cracked on the bottom, but the evap core was working when pulled
TPI set up, missing some attaching hardware, but I may have some of them.
driveshaft not for sale
I think I have all the lines for oil cooler too.
evap,box is cracked on the bottom, but the evap core was working when pulled
TPI set up, missing some attaching hardware, but I may have some of them.
Trending Topics
#10
Supreme Member
Re: '89 TPI parts,MAF,serpentine,etc
I'd be interested in the air intake system if it's still available
#13
Junior Member
iTrader: (2)
Join Date: Apr 2012
Location: Pennsylvania
Posts: 64
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 Formula Firebird
Engine: 305 TPI
Transmission: 5-speed
Axle/Gears: 3:45
Re: '89 TPI parts,MAF,serpentine,etc
I am looking for just the canister that holds the air filter I have all the other parts including the K&N if you still have it and are willing to separate it let me know how much you want for it thanks!
#18
Member
iTrader: (2)
Join Date: Jul 2010
Location: Victoria, BC
Posts: 399
Likes: 0
Received 1 Like
on
1 Post
Car: 89 Firebird Formula
Engine: 3500T
Transmission: T56
Axle/Gears: 9 bolt/4.11
Re: '89 TPI parts,MAF,serpentine,etc
Was the A/C compressor working when pulled?
How much for the compressor and lines to V0R 1N1 Canada with USPS?
Or maybe just the lines as the compressor could be heavy for shipping.
How much for the compressor and lines to V0R 1N1 Canada with USPS?
Or maybe just the lines as the compressor could be heavy for shipping.
#21
Junior Member
iTrader: (5)
Join Date: Jul 2010
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Firebird Formula
Engine: 350 TBI LT1 Cam 60cc Vortec Heads
Transmission: 5 speed
Axle/Gears: 3.08
Re: '89 TPI parts,MAF,serpentine,etc
Are you willing to just sell the crank and water pump pulleys?
Thread
Thread Starter
Forum
Replies
Last Post
evilstuie
Tech / General Engine
22
01-09-2020 08:29 PM
NBrehm
Engine/Drivetrain/Suspension Parts for Sale
1
08-25-2015 11:49 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM