vortech v-1 s-trim blower
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,665
Likes: 3
From: Benzie, MI
Car: 91 rs
Engine: Blow through 383, 10 psi, xr288hr
Transmission: Manual th350 ATI 3000
Axle/Gears: 3.50 9"
vortech v-1 s-trim blower
Selling my setup. Its a tpi kit but I converted to carb.
Includes tpi mounting bracket, intake, blower, crank pulley, filter, belt, three different pullies, oil lines, cold air intake for cowl hoods. I don't think it will fit under a stock hood.
The tpi mounting bracket also relocates alternator to lower side.
If your using it for a carb setup, I'll include intake tube, blowoff valve, and carb hat.
I do not have the vortech supplied fuel regulator or whatever timing retard box they supplied. I do have an msd 6btm for sale though.
$2000. It is still installed. I'll upload a picture soon.
1500
Includes tpi mounting bracket, intake, blower, crank pulley, filter, belt, three different pullies, oil lines, cold air intake for cowl hoods. I don't think it will fit under a stock hood.
The tpi mounting bracket also relocates alternator to lower side.
If your using it for a carb setup, I'll include intake tube, blowoff valve, and carb hat.
I do not have the vortech supplied fuel regulator or whatever timing retard box they supplied. I do have an msd 6btm for sale though.
$2000. It is still installed. I'll upload a picture soon.
1500
Last edited by Batass; Jul 25, 2015 at 05:58 AM.
Joined: Jul 1999
Posts: 12,100
Likes: 127
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Re: vortech v-1 s-trim blower
Selling my setup. Its a tpi kit but I cannot find the tpi intake elbow. I converted to carb.
Includes tpi mounting bracket, blower, crank pulley, filter, belt, three different pullies, oil lines, cold air intake for cowl hoods. I don't think it will fit under a stock hood.
The tpi mounting bracket also relocates alternator to lower side.
If your using it for a carb setup, I'll include intake tube, blowoff valve, and carb hat.
I do not have the vortech supplied fuel regulator or whatever timing retard box they supplied. I do have an msd 6btm for sale though.
$2000. It is still installed. I'll upload a picture soon.
Includes tpi mounting bracket, blower, crank pulley, filter, belt, three different pullies, oil lines, cold air intake for cowl hoods. I don't think it will fit under a stock hood.
The tpi mounting bracket also relocates alternator to lower side.
If your using it for a carb setup, I'll include intake tube, blowoff valve, and carb hat.
I do not have the vortech supplied fuel regulator or whatever timing retard box they supplied. I do have an msd 6btm for sale though.
$2000. It is still installed. I'll upload a picture soon.
-- Joe
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,665
Likes: 3
From: Benzie, MI
Car: 91 rs
Engine: Blow through 383, 10 psi, xr288hr
Transmission: Manual th350 ATI 3000
Axle/Gears: 3.50 9"
Re: vortech v-1 s-trim blower
Yes still for sale, sorry forgot to check messages. I'll upload some pictures today or tomorrow.
Trending Topics
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,665
Likes: 3
From: Benzie, MI
Car: 91 rs
Engine: Blow through 383, 10 psi, xr288hr
Transmission: Manual th350 ATI 3000
Axle/Gears: 3.50 9"
Re: vortech v-1 s-trim blower
I've owned it for about nine years. It probably has about 20 hours of run time in a drag only car. Bearings are tight, spins freely.
I don't have the old tpi alternator and power steering bracket. That's why it is still installed.
I don't have the old tpi alternator and power steering bracket. That's why it is still installed.
Joined: Jul 1999
Posts: 12,100
Likes: 127
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Supreme Member
iTrader: (1)
Joined: Dec 2002
Posts: 1,391
Likes: 66
From: MA
Car: 1989 IrocZ
Engine: 421 Dart Stroker
Transmission: 4L60E Cahall Performance Built
Axle/Gears: Midwest Chassis Fab 9/ 3.55 gears
Re: vortech v-1 s-trim blower
Too bad you didnt have the s intake piping. I dont really want to search for parts. Thanks for the pics.
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,665
Likes: 3
From: Benzie, MI
Car: 91 rs
Engine: Blow through 383, 10 psi, xr288hr
Transmission: Manual th350 ATI 3000
Axle/Gears: 3.50 9"
Re: vortech v-1 s-trim blower
The s piping is in my parents garage 700 miles away. Maybe I can talk someone into looking for it. Didn't think there were many tpi cars left out there....
Junior Member
Joined: Feb 2014
Posts: 19
Likes: 4
From: Georgetown ontario
Car: 1988 formula 350
Engine: 5.7 tpi full bolt ons
Transmission: 700 r 4 sonic shift kit
Axle/Gears: 323
Re: vortech v-1 s-trim blower
May grab this if you could get the s pipe together and ship everything together as kit to Ontario canada
Joined: Jul 1999
Posts: 12,100
Likes: 127
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Senior Member
Joined: Mar 2014
Posts: 571
Likes: 10
From: Indy
Car: 88 IROC-Z
Engine: GEN 4 LY6 (going forged 408)
Transmission: 60E (going RPM LEVEL 6 4L80E)
Axle/Gears: 7.5" 3.42 (staying...)
Junior Member
iTrader: (2)
Joined: Sep 2009
Posts: 98
Likes: 0
Car: 1987 Iroc Vert
Engine: 305
Transmission: 5 spd
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,665
Likes: 3
From: Benzie, MI
Car: 91 rs
Engine: Blow through 383, 10 psi, xr288hr
Transmission: Manual th350 ATI 3000
Axle/Gears: 3.50 9"
Re: vortech v-1 s-trim blower
My brother found the intake. I'll post a picture of everything when I pull the supercharger.
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,665
Likes: 3
From: Benzie, MI
Car: 91 rs
Engine: Blow through 383, 10 psi, xr288hr
Transmission: Manual th350 ATI 3000
Axle/Gears: 3.50 9"
Re: vortech v-1 s-trim blower
1500 was my bottom price. Needs to be out the door in three weeks.
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,665
Likes: 3
From: Benzie, MI
Car: 91 rs
Engine: Blow through 383, 10 psi, xr288hr
Transmission: Manual th350 ATI 3000
Axle/Gears: 3.50 9"
Re: vortech v-1 s-trim blower
Has a hole in it for the bypass/blow off. I don't remember how the factory one was supposed to attach, but you will have to weld on a mount for one.
Joined: Jul 1999
Posts: 12,100
Likes: 127
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,665
Likes: 3
From: Benzie, MI
Car: 91 rs
Engine: Blow through 383, 10 psi, xr288hr
Transmission: Manual th350 ATI 3000
Axle/Gears: 3.50 9"
Re: vortech v-1 s-trim blower
Sure I can. But until it's off the engine, I'm going to try to get what I can.
I'm not allowed to put any more money into the car. I can only sell to buy. Those are my new rules, so......
I'm not allowed to put any more money into the car. I can only sell to buy. Those are my new rules, so......
Joined: Jul 1999
Posts: 12,100
Likes: 127
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Re: vortech v-1 s-trim blower
Anyhow, I have no idea what I'd do with it, but for the right price I'd stick it in a box in the basement for a rainy day. So let me know. $1500 is just a bit too high though for something I don't actually need.
-- Joe
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,665
Likes: 3
From: Benzie, MI
Car: 91 rs
Engine: Blow through 383, 10 psi, xr288hr
Transmission: Manual th350 ATI 3000
Axle/Gears: 3.50 9"
Want a title? Post!
Joined: Apr 2013
Posts: 0
Likes: 0
From: connecticut
Car: 87 formula firebire 86 trans am 9.
Engine: 350 tpi, and 2 carborated 305's
Transmission: 700r4
Axle/Gears: stock rears
Re: vortech v-1 s-trim blower
Do you still have that carb set up ?
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,665
Likes: 3
From: Benzie, MI
Car: 91 rs
Engine: Blow through 383, 10 psi, xr288hr
Transmission: Manual th350 ATI 3000
Axle/Gears: 3.50 9"
Joined: Jul 1999
Posts: 12,100
Likes: 127
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,665
Likes: 3
From: Benzie, MI
Car: 91 rs
Engine: Blow through 383, 10 psi, xr288hr
Transmission: Manual th350 ATI 3000
Axle/Gears: 3.50 9"
Joined: Jul 1999
Posts: 12,100
Likes: 127
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Thread
Thread Starter
Forum
Replies
Last Post
codeysabatini
Engine/Drivetrain/Suspension Parts for Sale
5
Nov 10, 2015 04:07 PM
buckeyecelt
Tech / General Engine
3
Sep 24, 2015 05:50 AM