I have a 327CI engine that I bought and rebuilt years ago and never ran. I was actually surprised to find this still sitting in storage when I went to visit family in Indiana.

Relevant information:
block casting # 3782870
head casting # 3814480

I had this rebuilt about 6 years ago for another project which I never finished. Everything was disassembled, cleaned, inspected, and reassembled. New valves, pushrods, springs, rocker arms. Mild performance cam (and lifters of course), although I don't have the cam information. Bored .030 over. Hardened valve seats installed.

As I said, this has been sitting for about 6 years. It has been in plastic the entire time but will likely need some work. The block and the work ran $1500 back in 2010; I'm asking $600. Might consider trades.

Here's the downside: I don't live in Indiana, and you will need to pick up. I can coordinate with my brother (who despite his complete indifference to cars in general and Camaros in particular is a pretty nice guy). Engine is at a warehouse with a forklift so it will be easy enough to load. If you are DEAD SET on getting this shipped somewhere it can probably be arranged, but it's going to be pricey.

Questions? Just ask!

 

...and pictures are located in this album: https://www.thirdgen.org/g/album/5700102

Thanks!

 

forged pistons or cast?

 

Unsure about the pistons. The crank is forged.

 

Bump. Friday price drop to $500. If anyone has questions let me know!

 

Where at in Indiana, and pics if possible.

 

Evansville (southern tip).

Pictures are in this album: https://www.thirdgen.org/g/album/5700102

 

One more bump, and another price drop to $450. That's the lowest I'm going to go. Would consider parts or tools for full/partial trade, let me know what you have.