[Sold] AS&M runners, ported plenum, TPIS manifold, fuel rails & Injectors
Thread Starter
Joined: Jun 2010
Posts: 45
Likes: 6
From: Shreveport, La
Car: 1987 Iroc Z
Engine: 355 TPI Fully Built
Transmission: Borg Warner WC 5-Speed
Axle/Gears: Stock Posi Rearend
AS&M runners, ported plenum, TPIS manifold, fuel rails & Injectors
ALL SOLD. THANKS!
I have a set of lightly used large mouth TPI intake runners, BBK throttle body, ported stock plenum, TPIS high flow intake manifold, and fuel rail with new matched injectors. All of these have only about 100 miles of use. I came accross a supercharged motor, so this setup needs to go. This intake combo made an enormous amount of torque all the way throu 5500rpm. The car has been stored for about 3 years being cranked occasionaly. There is a little bit of aluminum oxidation that wipes away easily with your finger. Please feel free to ask questions. OBO on these items. Send me a zip code for shipping quotes. Will sell as complete package for $1000 shipped.
Thanks! Greg
BBK 58mm throttle body with SS hardware and sensors, modified water bypass and SS hardware. IROC throttle plate
- $200 (shipped)
AS&M Large mouth runners, couple of small dents on underside. not noticeable. (includes billet 9th injector block off plate & SS hardware)
- $350 + shipping (includes upper plenum with throttle cable mount)
Fuel rail modified for AN fittings with Holley adjustable regulator and new injectors.
- $175 (shipped)
High flow intake, TPIS brand, non vortec & SS hardware. Intake was surface milled to ensure flatness and requires thick intake gaskets.
- $350 + shipping
Feel free to shoot me offers, I'm not planning on using these items.
I have a set of lightly used large mouth TPI intake runners, BBK throttle body, ported stock plenum, TPIS high flow intake manifold, and fuel rail with new matched injectors. All of these have only about 100 miles of use. I came accross a supercharged motor, so this setup needs to go. This intake combo made an enormous amount of torque all the way throu 5500rpm. The car has been stored for about 3 years being cranked occasionaly. There is a little bit of aluminum oxidation that wipes away easily with your finger. Please feel free to ask questions. OBO on these items. Send me a zip code for shipping quotes. Will sell as complete package for $1000 shipped.
Thanks! Greg
BBK 58mm throttle body with SS hardware and sensors, modified water bypass and SS hardware. IROC throttle plate
- $200 (shipped)
AS&M Large mouth runners, couple of small dents on underside. not noticeable. (includes billet 9th injector block off plate & SS hardware)
- $350 + shipping (includes upper plenum with throttle cable mount)
Fuel rail modified for AN fittings with Holley adjustable regulator and new injectors.
- $175 (shipped)
High flow intake, TPIS brand, non vortec & SS hardware. Intake was surface milled to ensure flatness and requires thick intake gaskets.
- $350 + shipping
Feel free to shoot me offers, I'm not planning on using these items.
Last edited by gcj280; Feb 6, 2018 at 11:34 AM.
Thread Starter
Joined: Jun 2010
Posts: 45
Likes: 6
From: Shreveport, La
Car: 1987 Iroc Z
Engine: 355 TPI Fully Built
Transmission: Borg Warner WC 5-Speed
Axle/Gears: Stock Posi Rearend
Re: AS&M runners, ported stock plenum, manifold
BBk Throttle body
Joined: Feb 2003
Posts: 2,498
Likes: 20
From: PNW
Car: 91 Black Formula KR
Engine: 305 TPI R69/G92
Transmission: Astro A5-Pro 5.0-McCleod
Axle/Gears: US Gear 3.42 Eaton True Trac
Re: AS&M runners, ported stock plenum, manifold
Can you check brand of manifold? Pics? Shipping to 33773?
Thanks
Thanks
Thread Starter
Joined: Jun 2010
Posts: 45
Likes: 6
From: Shreveport, La
Car: 1987 Iroc Z
Engine: 355 TPI Fully Built
Transmission: Borg Warner WC 5-Speed
Axle/Gears: Stock Posi Rearend
Re: AS&M runners, ported stock plenum, manifold
Fuel Rail
Thread Starter
Joined: Jun 2010
Posts: 45
Likes: 6
From: Shreveport, La
Car: 1987 Iroc Z
Engine: 355 TPI Fully Built
Transmission: Borg Warner WC 5-Speed
Axle/Gears: Stock Posi Rearend
Re: AS&M runners, ported stock plenum, manifold
plenum
Thread Starter
Joined: Jun 2010
Posts: 45
Likes: 6
From: Shreveport, La
Car: 1987 Iroc Z
Engine: 355 TPI Fully Built
Transmission: Borg Warner WC 5-Speed
Axle/Gears: Stock Posi Rearend
Re: AS&M runners, ported stock plenum, manifold
runners
Last edited by gcj280; Feb 2, 2018 at 07:29 AM.
Thread Starter
Joined: Jun 2010
Posts: 45
Likes: 6
From: Shreveport, La
Car: 1987 Iroc Z
Engine: 355 TPI Fully Built
Transmission: Borg Warner WC 5-Speed
Axle/Gears: Stock Posi Rearend
Re: AS&M runners, ported stock plenum, manifold
I'll check tonight and get some pics. It's currently still on the car. But I can pull it in a couple of min.
Last edited by gcj280; Jan 31, 2018 at 07:45 AM.
Trending Topics
Joined: Feb 2003
Posts: 2,498
Likes: 20
From: PNW
Car: 91 Black Formula KR
Engine: 305 TPI R69/G92
Transmission: Astro A5-Pro 5.0-McCleod
Axle/Gears: US Gear 3.42 Eaton True Trac
Re: AS&M runners, ported stock plenum, manifold
Ok, let me know / pics and I'll decide... just want to keep my spot 
Thread Starter
Joined: Jun 2010
Posts: 45
Likes: 6
From: Shreveport, La
Car: 1987 Iroc Z
Engine: 355 TPI Fully Built
Transmission: Borg Warner WC 5-Speed
Axle/Gears: Stock Posi Rearend
Thread Starter
Joined: Jun 2010
Posts: 45
Likes: 6
From: Shreveport, La
Car: 1987 Iroc Z
Engine: 355 TPI Fully Built
Transmission: Borg Warner WC 5-Speed
Axle/Gears: Stock Posi Rearend
Re: AS&M runners, ported plenum, TPIS manifold, fuel rails & Injectors
more pics of runners
Junior Member
Joined: Jul 2005
Posts: 11
Likes: 1
From: Charleston, SC
Car: 92 RS convertible
Engine: none...building a 407
Transmission: T56
Axle/Gears: 12 bolt w/4.10 gears
Re: AS&M runners, ported plenum, TPIS manifold, fuel rails & Injectors
How much was the TPIS Big Mouth manifold surface milled down "to ensure flatness?" I'm concerned if it'll fit. I know you said it would need thicker gaskets, but Fel-Pro only makes them so much thicker than standard. Thanks.
Thread Starter
Joined: Jun 2010
Posts: 45
Likes: 6
From: Shreveport, La
Car: 1987 Iroc Z
Engine: 355 TPI Fully Built
Transmission: Borg Warner WC 5-Speed
Axle/Gears: Stock Posi Rearend
Re: AS&M runners, ported plenum, TPIS manifold, fuel rails & Injectors
Thanks! Greg
Thread
Thread Starter
Forum
Replies
Last Post
soupman
Engine/Drivetrain/Suspension Parts for Sale
5
Jan 30, 2018 06:03 PM
Gunner823
Engine/Drivetrain/Suspension Parts for Sale
11
May 25, 2009 07:35 PM
LT1FUN
TPI
7
Oct 9, 2007 05:34 AM