Injectors wanted
Thread Starter
Senior Member
Joined: Aug 2005
Posts: 767
Likes: 0
From: Connecticut
Car: 2005 Lincoln LS, 83' Z28
Engine: 242 DOHC and an empty engine bay.
Transmission: 5R55S, T5 soon to be auto
Axle/Gears: 3.58s and soon to be 4.10s
Injectors wanted
Looking for some cheap injectors.. 19#'s or higher.. Thanks
Member
Joined: Apr 2004
Posts: 262
Likes: 3
From: Abilene, TX
Car: 1989 GTA
Engine: 5.7 TPI
Transmission: A4
Axle/Gears: 3.23
I should still have the stock injectors off my L98. I think they're 22#, not positive. 120K miles on them, they all ohm out just may want to have them cleaned. I upgraded to 30# injectors.
Member
Joined: Jun 2001
Posts: 287
Likes: 0
From: Bergen County, NJ
Car: 1988 Monte SS
Engine: ZZ4-cammed TPI 355
Transmission: World-Class T5
I have a set of 8 Ford Motorsport 19 lb. injectors with 25K miles on them. Ran great when pulled from my TPI 305 about 2 months ago.
$90 shipped to you.
$90 shipped to you.
Thread Starter
Senior Member
Joined: Aug 2005
Posts: 767
Likes: 0
From: Connecticut
Car: 2005 Lincoln LS, 83' Z28
Engine: 242 DOHC and an empty engine bay.
Transmission: 5R55S, T5 soon to be auto
Axle/Gears: 3.58s and soon to be 4.10s
Pete I may be interested if Beedo wants too much for those LS1 injectors..
Junior Member
Joined: Feb 2004
Posts: 39
Likes: 0
Car: 85 trans am
Engine: 350 4bm TPI
Transmission: 700r4
quick question are ls1 injectors the same as ones on tpi cars, cause i really need some injectors, and i can get 8 28lb ones for $100 or accell 24lb for injectors ( but i heard accell are crap), and i'd like to know if they fit right
Trending Topics
Thread Starter
Senior Member
Joined: Aug 2005
Posts: 767
Likes: 0
From: Connecticut
Car: 2005 Lincoln LS, 83' Z28
Engine: 242 DOHC and an empty engine bay.
Transmission: 5R55S, T5 soon to be auto
Axle/Gears: 3.58s and soon to be 4.10s
No they are not the same.. LS1 injectors are bigger but not by much and you can get power increase from swapping them.. Accel injectors are ok.. No total crap, they get the job done.
Junior Member
Joined: Feb 2004
Posts: 39
Likes: 0
Car: 85 trans am
Engine: 350 4bm TPI
Transmission: 700r4
I know Ls1' are bigger, but I quess what i wanted to say was will the ls1 or accell injectors fit into the intake and fuel rail with out any mods. I head u have to i think, shave down the fuel rail ports for the svo ones to fit, the Ls1's u need a special clip made up, and the accell's i think fit right up?
Thread Starter
Senior Member
Joined: Aug 2005
Posts: 767
Likes: 0
From: Connecticut
Car: 2005 Lincoln LS, 83' Z28
Engine: 242 DOHC and an empty engine bay.
Transmission: 5R55S, T5 soon to be auto
Axle/Gears: 3.58s and soon to be 4.10s
Not sure about the LS!'s fitting but the Accel's should be direct replacment.
Thread Starter
Senior Member
Joined: Aug 2005
Posts: 767
Likes: 0
From: Connecticut
Car: 2005 Lincoln LS, 83' Z28
Engine: 242 DOHC and an empty engine bay.
Transmission: 5R55S, T5 soon to be auto
Axle/Gears: 3.58s and soon to be 4.10s
whats the stock rating for injectors off an L98?? their going on my V6 so I dont need 8 only 6.. Would like to get higher than 19#'s but if the people that have ones that big dont respond soon Im up for the 19's.. Not wanting to spend over a $100 tho sorry Slowmaro..
Thread
Thread Starter
Forum
Replies
Last Post




