SLP headers needed ASAP!!
Thread Starter
Member
iTrader: (1)
Joined: Mar 2003
Posts: 378
Likes: 0
From: Ohio
Car: 1985 IrocZ
Engine: Carbed 383
Transmission: Tremec T-56
Axle/Gears: 3.42
SLP headers needed ASAP!!
Hey guys im in need of a set of SLP headers and y-pipe without AIR tubes and 1 3/4" primaries. If anyone has a set coated or non let me know, Thanks!
Senior Member
iTrader: (28)
Joined: Jun 2002
Posts: 966
Likes: 0
From: New Jersey
Car: 89 formula convert looks like a 92
Engine: original 350 tpi engine
Transmission: auto
Axle/Gears: 373 10 bolt with LS1 brakes
i have a set of slp headers with the y-pipebut the have the air tubes
Thread Starter
Member
iTrader: (1)
Joined: Mar 2003
Posts: 378
Likes: 0
From: Ohio
Car: 1985 IrocZ
Engine: Carbed 383
Transmission: Tremec T-56
Axle/Gears: 3.42
I guess i could hack them off and have them welded shut. Do you have any pics? Are they 1 3/4" primaries? What is your asking price? Thanks!
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Ive got a set of SLP headers 1 3/4" w/o air tubes. It looks like the air tubes where cut off and the holes where tig welded. it looks like either SLP did this or a VERY good welder did. The weld is about the size of an eraser tip on a pencil. I also have the dual cat y pipe that comes with it and the y pipe only has about 100 miles on it. The headers a re bit older but still in great shape. > my reason for selling them is that they dont work with my heads. I keep burning trhe plug wires. Let me know if your interested.
Trending Topics
Thread Starter
Member
iTrader: (1)
Joined: Mar 2003
Posts: 378
Likes: 0
From: Ohio
Car: 1985 IrocZ
Engine: Carbed 383
Transmission: Tremec T-56
Axle/Gears: 3.42
the only problem is i need a y-pipe for a single cat. Can you send me some pics of the headers to adamzz28@yahoo.com? Im hoping slps will work with fastburns. thanks!
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
I currently do not have pics of the headers or Y pipe. My dual cat y ppe is setup for a single cat setup. That is how I have it now. I welded one of those Flowmaster Y collectors to the 2 pipes on the y pipe and then welded a piece of angle 3" tubing. I then welded a 3" random Technology cat to it. The cat still sits under theheat shield like it should. let me see if I can get some pics. If it gets sold, I will cut the cat off and it is the buyers responsiblility to weld there own cat in place. Or I can sell the cat with the whole setup. I will take offers around $600 for everything. thats the headers, dual cat ypipe, and 3" Randon Technology cat. I will also throw in brand new SLP donut gaskets for the Y pipe. The headers gaskets are 1 week old right now also. The headers and y pipe I will let go for $400. They are not rusted or show any signs of corrosion on them.
Thread
Thread Starter
Forum
Replies
Last Post