WTB Junk 165 ECM
02-01-2007, 06:51 PM
#3
Junior Member
Thread Starter
Join Date: Jan 2003
Location: Knoxville, TN
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Most likely what you have is a 730 ECM. If it is it will work for what I need. If you look at the ECM, it should have some numbers on the outside. Check to see if the last three digits of one of the numbers says 730. On the side of the ECM where the connectors plug in there should be three connectors. Two of the connectors look like they are one unit. On that unit you should be able to count the pins and find a 24 pin and a 32 pin connection. If this is what you have, then let me know what you want for it shipped to 37923.
Thanks.
Thanks.
02-02-2007, 12:17 PM
#5
Junior Member
Thread Starter
Join Date: Jan 2003
Location: Knoxville, TN
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
02-02-2007, 12:25 PM
#6
Junior Member
Thread Starter
Join Date: Jan 2003
Location: Knoxville, TN
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
02-02-2007, 12:35 PM
#7
Junior Member
Thread Starter
Join Date: Jan 2003
Location: Knoxville, TN
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
02-02-2007, 12:37 PM
#8
Junior Member
Thread Starter
Join Date: Jan 2003
Location: Knoxville, TN
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post