Few parts needed for Project
Thread Starter
Member
iTrader: (4)
Joined: Jun 2007
Posts: 140
Likes: 0
From: Rock Falls, Illinois
Car: 89 and 91 Camaro RS
Engine: 350ci TPI and 305ci TBI
Transmission: 700R4
Axle/Gears: 2.73 One-wheel wonder
Few parts needed for Project
Hi everyone I've got just a couple of parts left that I'm looking for. Prefer that they be within driving distance of me so I can pick them up in the next few days but if not thats fine, just trying to get the car finally drivable by this weekend.
-Speedo gear and housing...mines cracked 2.73 rear preferably
not a necessity but if someone had one for a decent price i'm interested.
-B&M Ratchet Shifter
thanks everyone
-Speedo gear and housing...mines cracked 2.73 rear preferably
not a necessity but if someone had one for a decent price i'm interested.
-B&M Ratchet Shifter
thanks everyone
Last edited by cam383; Sep 5, 2007 at 12:52 AM. Reason: Found a few of the parts
Junior Member
Joined: Feb 2004
Posts: 73
Likes: 0
From: DFW Area
Car: 1984 Z-28
Engine: 5.0L H.O.
Transmission: 700R4
Re: Few parts needed for Project
For the trans dipstick, you should be able to find that at your local auto parts store for $10-$15. I don't have anything else though, sorry.
Senior Member
iTrader: (24)
Joined: Dec 2004
Posts: 712
Likes: 1
From: washington state
Car: 1992 Firebird v6 1992 formula v8
Engine: 3.1, 350 TPI
Transmission: both 700 r4
Re: Few parts needed for Project
I have a torque arm mount for a 700 r4 Let me know if interested
Joined: Feb 2002
Posts: 3,462
Likes: 4
From: N. Illinois
Car: 92 GTA/ 00 TA
Engine: 383/350
Transmission: 700R4/T-56
Re: Few parts needed for Project
I'm within driving distance. I have a complete torque arm mount assembly off my 92 700 if you're interested.
Thread Starter
Member
iTrader: (4)
Joined: Jun 2007
Posts: 140
Likes: 0
From: Rock Falls, Illinois
Car: 89 and 91 Camaro RS
Engine: 350ci TPI and 305ci TBI
Transmission: 700R4
Axle/Gears: 2.73 One-wheel wonder
Re: Few parts needed for Project
For the trans dipstick, you should be able to find that at your local auto parts store for $10-$15. I don't have anything else though, sorry.
I have a torque arm mount for a 700 r4 Let me know if interested
I'm within driving distance. I have a complete torque arm mount assembly off my 92 700 if you're interested.
Joined: Feb 2002
Posts: 3,462
Likes: 4
From: N. Illinois
Car: 92 GTA/ 00 TA
Engine: 383/350
Transmission: 700R4/T-56
Re: Few parts needed for Project
Pretty much any time. My work schedule is so inconsistent right now.
Shoot me an honest $$ and i'll take it. It's doing me no good.
If you want to swap cell #'s just shoot me a PM.
Aren't you somewhere by round lake beach?
Shoot me an honest $$ and i'll take it. It's doing me no good.
If you want to swap cell #'s just shoot me a PM.
Aren't you somewhere by round lake beach?
Trending Topics
Joined: Feb 2002
Posts: 3,462
Likes: 4
From: N. Illinois
Car: 92 GTA/ 00 TA
Engine: 383/350
Transmission: 700R4/T-56
Re: Few parts needed for Project
Hey Mark
Before you drive check this out. Make sure it's what you need. You can have the exhaust hanger that went right there with it. It has 2 more long bolts that I believe you're going to need.
Before you drive check this out. Make sure it's what you need. You can have the exhaust hanger that went right there with it. It has 2 more long bolts that I believe you're going to need.
Member
Joined: Feb 2007
Posts: 165
Likes: 0
From: port jefferson station, new york
Car: 89 2.8 RS
Engine: the 2.8
Transmission: 700r4 auto
Axle/Gears: stock one wheel squealer
Re: Few parts needed for Project
you can get a tranny dipstick for a 700r4 at summitracing.com
http://store.summitracing.com/egnsea...115+4294903956
http://store.summitracing.com/egnsea...115+4294903956
Thread
Thread Starter
Forum
Replies
Last Post





