pm me with specs.

 

What are you looking for?

 

alum. or iron heads 64cc..... any thing to that spec and emissions friendly. no vortec.

 

ive got some off a 350 4 bolt main ,an their stock cast iron, heres the castings on them,, 3998991 h65 ,14014416 c14 ,, not sure what cc they are but they are perfeshionally remanufactured , in brand new condition never ran complete with springs rockers an valves , might need new valve stem seals they sat for a long time . ill take offers on them

 

center bplt valve covers?...... how much do you want for them.

 

I HAVE SOME EDELBROCK 6085'S WORKED REAL WELL! CONTACT ME AT 262-493-8969
OR danziroc383@yahoo.com

 

could you email me............ hockey_god_24@yahoo.com. with specs plz

 

no their not the center bolt kind their the 4 bolt type "older style"an ide take 40 plus s&h

 

THEY R PORTED, MILLED, 2.02 1.60 VALVES, 60CC, .600" SPRINGS. CENTERBOLT COVERS. WOULD INCLUDE MOROSO COVERS. ONLY HAVE 4K ON THEM. NEED THEM GONE, SO I CAN BUY MY CANFIELDS!!!
LET ME KNOW WHAT YOU THINK.
GIVE ME A CALL OR I CAN CALL YOU.
THANKS
DAN 262-483-8969

 

If i remember right 991 are 76 cc and the 416 are 58 cc...might want to check mortec to verify.

 

I have stock 083 heads off of my 92 350. centerbolt

 

i too have a set of 083's off of a 91 l98...let me know if you're interested. they will need to be redone

 

thnk for reply i just bought assembled aluminum patriot 185cc, 62cc exhaust, 62 combustion chambers, 2.02 intake/1.6 exhaust, springs for 550 lift. for 698.00 . let me know what you think i hope i didnt go worng with these heads.