~~ WTB ~ 90-92 V6 3.1 ECM Prom/Memcal ~~
Thread Starter
Want a title? Post!
Joined: Jul 2008
Posts: 0
Likes: 0
From: Calgary, Alberta, Canada
~~ WTB ~ 90-92 V6 3.1 ECM Prom/Memcal ~~
Hi all,
I'm looking for a 90-92 V6 3.1 ECM Prom / Memcal.
If you have just the Prom or the entire ECM please let me know.
Thanks
I'm looking for a 90-92 V6 3.1 ECM Prom / Memcal.
If you have just the Prom or the entire ECM please let me know.
Thanks
Supreme Member
iTrader: (27)
Joined: Jan 2006
Posts: 1,477
Likes: 0
From: Ct
Car: 1989 Iroc, 1987and 1989 formula 350
Engine: 305tpi,350tpi,ls1
Transmission: 700r4,t-56
Axle/Gears: 3:08,3:27,3:23
Thread Starter
Want a title? Post!
Joined: Jul 2008
Posts: 0
Likes: 0
From: Calgary, Alberta, Canada
Re: ~~ WTB ~ 90-92 V6 3.1 ECM Prom/Memcal ~~
O.K cool, This was a shot in the dark and I guess I found the right place 
I've received 2 replies and a few P.Ms with parts available for sale.
So now I can get into details:
I own a Fiero and doing an ECM swap to the 7730 ECM.
(Original thread here: http://www.fiero.nl/forum/Forum2/HTML/079574.html)
I have a good 7730 ECM but would like to use the Camaro / Firebird 3.1 Prom so that I have closest CALPAK with the limp mode resistors.
The Prom would be overwritten with the $88 code adjusted to my setup.
My setup has a 5sp tranny, but does it matter for this kind of mod?
Thanks for all your replies / offers.
I've added my location - Calgary, Alberta

I've received 2 replies and a few P.Ms with parts available for sale.
So now I can get into details:
I own a Fiero and doing an ECM swap to the 7730 ECM.
(Original thread here: http://www.fiero.nl/forum/Forum2/HTML/079574.html)
I have a good 7730 ECM but would like to use the Camaro / Firebird 3.1 Prom so that I have closest CALPAK with the limp mode resistors.
The Prom would be overwritten with the $88 code adjusted to my setup.
My setup has a 5sp tranny, but does it matter for this kind of mod?
Thanks for all your replies / offers.
I've added my location - Calgary, Alberta
Thread Starter
Want a title? Post!
Joined: Jul 2008
Posts: 0
Likes: 0
From: Calgary, Alberta, Canada
Re: ~~ WTB ~ 90-92 V6 3.1 ECM Prom/Memcal ~~
Checked with my ECM expert:
"Manual would be better. But auto would be acceptable"
So I'll wait to see if any manual Prom comes up if not I'll take one of the Auto ones.
Thanks.
"Manual would be better. But auto would be acceptable"
So I'll wait to see if any manual Prom comes up if not I'll take one of the Auto ones.
Thanks.
Joined: Aug 2005
Posts: 847
Likes: 1
From: Brunswick, Ga.
Car: 91 Formula
Engine: 350 L98 SD TPI
Transmission: 700R4
Axle/Gears: 10 bolt PBR 3:23 disc posi
Re: ~~ WTB ~ 90-92 V6 3.1 ECM Prom/Memcal ~~
I found 2 Memcals from 90-92 3.1 A/T that I sold the ECM that I forgot I had. 1 from a 90 Camaro and 1 from a 92 Firebird which doesn't really matter.$25 each plus shipping to Canada.
----------
I will be doing a junkyard run this week sometime and I will see if I can find one from a M/T.
----------
I will be doing a junkyard run this week sometime and I will see if I can find one from a M/T.
Last edited by Dokken10; Jul 6, 2008 at 10:51 AM. Reason: Automerged Doublepost
Trending Topics
Thread Starter
Want a title? Post!
Joined: Jul 2008
Posts: 0
Likes: 0
From: Calgary, Alberta, Canada
Re: ~~ WTB ~ 90-92 V6 3.1 ECM Prom/Memcal ~~
I found 2 Memcals from 90-92 3.1 A/T that I sold the ECM that I forgot I had. 1 from a 90 Camaro and 1 from a 92 Firebird which doesn't really matter.$25 each plus shipping to Canada.
----------
I will be doing a junkyard run this week sometime and I will see if I can find one from a M/T.
----------
I will be doing a junkyard run this week sometime and I will see if I can find one from a M/T.
Joined: Aug 2005
Posts: 847
Likes: 1
From: Brunswick, Ga.
Car: 91 Formula
Engine: 350 L98 SD TPI
Transmission: 700R4
Axle/Gears: 10 bolt PBR 3:23 disc posi
Re: ~~ WTB ~ 90-92 V6 3.1 ECM Prom/Memcal ~~
A member is parting out a 92 Camaro 3.1 with a 5 speed. He probably has the Memcal.
https://www.thirdgen.org/forums/exte...g-92-rs-v.html
https://www.thirdgen.org/forums/exte...g-92-rs-v.html
Thread Starter
Want a title? Post!
Joined: Jul 2008
Posts: 0
Likes: 0
From: Calgary, Alberta, Canada
Re: ~~ WTB ~ 90-92 V6 3.1 ECM Prom/Memcal ~~
A member is parting out a 92 Camaro 3.1 with a 5 speed. He probably has the Memcal.
https://www.thirdgen.org/forums/exte...g-92-rs-v.html
https://www.thirdgen.org/forums/exte...g-92-rs-v.html
Sent P.M with no reply...
can someone post there and ask 'tri power' to reply here?
Thanks
Thread Starter
Want a title? Post!
Joined: Jul 2008
Posts: 0
Likes: 0
From: Calgary, Alberta, Canada
Re: ~~ WTB ~ 90-92 V6 3.1 ECM Prom/Memcal ~~
Can anyone advise me , related to this ... if they have one that will work with a 90 Camaro, 3.1, MD08 trans (automatic) ... the one in the car is a ARPM 5185.
Will a Prom for a 1991, 3.1 MD09 (instead of MD08) automatic work ??
Issue I"m having is that the car will turn over, start & run for about 1-2 seconds and quit. The car was "running" and while sitting there idling, it quit, and would not restart. Check gas pump, fuel filter blockage, and about everything else in the world we could think of, and now down to the ECM or PROM, and we think the prom. It was having "symptoms" that fit the description of being in LIMP mode.
Will a Prom for a 1991, 3.1 MD09 (instead of MD08) automatic work ??
Issue I"m having is that the car will turn over, start & run for about 1-2 seconds and quit. The car was "running" and while sitting there idling, it quit, and would not restart. Check gas pump, fuel filter blockage, and about everything else in the world we could think of, and now down to the ECM or PROM, and we think the prom. It was having "symptoms" that fit the description of being in LIMP mode.
Last edited by eagleks; Aug 2, 2011 at 11:03 PM.
Thread
Thread Starter
Forum
Replies
Last Post






