L98 HEADS WANTED!!
Thread Starter
Joined: Jan 2009
Posts: 539
Likes: 0
From: Texas
Car: 1991 Trans Am GTA
Engine: 350 tpi
Transmission: 700R4
Axle/Gears: 3.42
L98 HEADS WANTED!!
Well if i cant find another vortec head im going to be looking into a set of l98 heads if u have some u wanna part with let me know thanks.
Junior Member
iTrader: (3)
Joined: Mar 2010
Posts: 4
Likes: 0
From: Colorado Springs
Car: Hot Wheels
Engine: Stroker 383
Re: L98 HEADS WANTED!!
have a set of 906 heads with about 1000 miles on them from a crate motor 64 cc . 325 + shipping will include a set of .550 lift springs
Junior Member
Joined: Nov 2008
Posts: 51
Likes: 0
From: Topeka, KS
Car: Blue 86 IROC-Z
Engine: 305 TPI, Soon a 355 TPI
Transmission: Auto, Soon a WCT-5
Axle/Gears: Nine Bolt, 3.42 posi
Re: L98 HEADS WANTED!!
I have a set of 87 L98 heads that I am not using. I bought my motor in pieces and was told that these heads needed a valve job because the motor was fouling one plug (unfortunately I can’t remember which cylinder). Anyway, I had always intended on putting aluminum heads on this motor and this was a good enough excuse (doesn’t take much) to buy new ones off of eBay. If you were going to tear down the heads for porting or a valve job anyway, these would probably be a good starting place. I could send you’re your way for $100 plus shipping.
Thread Starter
Joined: Jan 2009
Posts: 539
Likes: 0
From: Texas
Car: 1991 Trans Am GTA
Engine: 350 tpi
Transmission: 700R4
Axle/Gears: 3.42
Re: L98 HEADS WANTED!!
thanks man but i was looking for some that where in good shape just to re surface and put on my motor thanks though but if i cant find any ill send you a pm.
Junior Member
Joined: Nov 2008
Posts: 51
Likes: 0
From: Topeka, KS
Car: Blue 86 IROC-Z
Engine: 305 TPI, Soon a 355 TPI
Transmission: Auto, Soon a WCT-5
Axle/Gears: Nine Bolt, 3.42 posi
Re: L98 HEADS WANTED!!
No problem, they are just sittin around collecting dusk right now. Let me know if you change your mind.
Trending Topics
Junior Member
iTrader: (1)
Joined: Jan 2008
Posts: 3
Likes: 0
From: Lansing, Michigan
Car: 90,94,96 C4, 93 F 07 K3500
Engine: L98, LT1
Transmission: M6
Re: L98 HEADS WANTED!!
Money Pit. Can you see if the heads you have are 083. If they are please let me know. Thank you
Junior Member
Joined: Nov 2008
Posts: 51
Likes: 0
From: Topeka, KS
Car: Blue 86 IROC-Z
Engine: 305 TPI, Soon a 355 TPI
Transmission: Auto, Soon a WCT-5
Axle/Gears: Nine Bolt, 3.42 posi
Re: L98 HEADS WANTED!!
wbspoon - I will get out in the garage and check tomorrow and will let you know.
Junior Member
Joined: Nov 2008
Posts: 51
Likes: 0
From: Topeka, KS
Car: Blue 86 IROC-Z
Engine: 305 TPI, Soon a 355 TPI
Transmission: Auto, Soon a WCT-5
Axle/Gears: Nine Bolt, 3.42 posi
Re: L98 HEADS WANTED!!
wbspoon - I looked at these today and it appears that the last three digits are 191,
Junior Member
iTrader: (3)
Joined: Mar 2010
Posts: 4
Likes: 0
From: Colorado Springs
Car: Hot Wheels
Engine: Stroker 383
Re: L98 HEADS WANTED!!
did you see the pics ,also have set 128 corvette heads (50.000 miles +/-)375.00, World Products SR Torquer heads a ready to bolt on 500.00 all + ship
Last edited by chrisr0315; Aug 23, 2010 at 05:52 PM.
Thread Starter
Joined: Jan 2009
Posts: 539
Likes: 0
From: Texas
Car: 1991 Trans Am GTA
Engine: 350 tpi
Transmission: 700R4
Axle/Gears: 3.42
Re: L98 HEADS WANTED!!
Im probably not going to go the vortec route anymore i sold the heads and manifold today...so looking for some good 350 heads.
Member
iTrader: (10)
Joined: Apr 2006
Posts: 400
Likes: 0
From: Joliet IL
Car: 89 Camaro Convert,89 Camaro hardtop
Engine: 305 and a 357
Transmission: 700R4,T5
Axle/Gears: 4.10's and 3.43's
Re: L98 HEADS WANTED!!
I have a set of really nice aluminum vette heads all ready to go fresh from the machine shop, Check my for sale add for pictures and more information
Junior Member
Joined: Jan 2010
Posts: 60
Likes: 0
From: Corpus Christi TX
Car: Corvette
Engine: 383
Transmission: 700r4
Axle/Gears: D36 w/ 3.08
Re: L98 HEADS WANTED!!
I have the L98 heads off my 85 vette. Mild polishing and very fresh. Only 500-1000 miles since they were gone through. Found some Dart iron eagles so swapped em quick.
LMK
LMK
Joined: Apr 2002
Posts: 62
Likes: 0
From: Highland Twp MI
Car: 1986 IROC-Z
Engine: 383 TPI
Transmission: 700R4 2500 stall
Axle/Gears: 3.70 Moser 9in
Re: L98 HEADS WANTED!!
I have some with a mild port match to felpro gaskets. Newer valve seals and crane springs. Shipping may be high because of the distance but im looking for $250.00+ shipping. PM me if interested. Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
1988iroc350tpi
Tech / General Engine
8
Aug 14, 2015 07:52 PM