I have an Lq4, and the truck oil pan hangs super low.

Looking for an f-body, or GTO oil pan. Need the windage tray, pickup tube, and if possible the dipstick tube/dipstick as well.

 

GTO pan is front sump, won't work

 

Appreciate the heads up. Guess just the F-body pan and possibly even the cts-v oil pan.

 

bump, anyone know about the ls3 pan fitments?

 

Corvette is the only LS3 pan that will fit, but only on a tubular K-member

Best bet is to find the $200 Fbody pan kit deal

 

Thanks for the help guys .

Still in search for a the infamous Fbody pan, let me know what everyone has

 

http://paceperformance.com/i-5133402...k-engines.html

http://paceperformance.com/i-6255531...-nova-etc.html

First link is the Fbody kit, second link I dont know if it fits or not...Would be nice if it does

 

definitely going to look into that 2nd one!! Thats a wicked price, and if it fits your my new hero

 

If you look at the measurements it should "fit" but Im afraid of about how low that rear sump will hang past the K member. Im thinking bout building a bracket race car with a carbed 6.0 and im debating taking the plunge with that oil pan. But I need to compare its measurements to the stock truck pan first. Maybe that will be my mission during my free time at work today.

 

http://ls1tech.com/forums/17026512-post6.html

I found a side-by-side picture against the truck pan. Seems like its not much difference, if any.

The price is right, but shaving those extra couple inches with the fbody might be smarter for the extra coin if I can find a used fbody one for sale.

 

Not sure about your application, but be careful the sump is not the lowest part of your vehicle. I just swapped a L76 from a G8 GT into my '91 Z28 but ran into problems with ground clearance. My solutions was an LS1 (98-02) oil pan and I found one on Ebay. This oil pan is only 5 inches deep compared with the LS swap oil pan sold by Summit Racing which is 7-8 inches deep.

 

Im going to try to make a trip down across the border shortly, so if anyone has an Fbody pan in the Buffalo region, or will ship one to there let me know.

 

bump

 

http://ls1tech.com/forums/parts-clas...1-98-02-a.html