[TX] WTB Racing Parts DFW
Thread Starter
Junior Member
Joined: Mar 2013
Posts: 8
Likes: 0
From: DFW, Texas
Car: 1991 Camaro RS
Engine: 5.8l Aluminum LSX
Transmission: T56
Axle/Gears: 10 Bolt 3.42 "Spooled"
WTB Racing Parts DFW
Hey guys! been awhile since I've posted. I'm looking for quite a few things.
I have a 1991 Camaro RS that I'm looking to drive in the 2016 Lonestar Drift Pro-Am circuit. I'm finishing up my cage currently and will be needing quite a few parts. If you see something not on the list I'm definitely open to suggestions! Offer it up!
Looking for:
Front coilover conversion, (Spohn definitely preferred.)
Rear Weight-Jack Setup, (250ish springs preferred.. haven't really decided for sure.)
Tubular K-member, (Not super necessary. but wouldn't say no to the right price.)
MAYBE Tubular A-arms? (Probably just gonna fab my own. need lots of steering angle.)
tubular LCAs,
LS1 conversion brackets for the front,
Double U-Joint (Astro) steering shaft,
Nice set of Bucket seats to replace my aluminum full containment bucket,
Again, open to offers and suggestion! Thanks guys!
I have a 1991 Camaro RS that I'm looking to drive in the 2016 Lonestar Drift Pro-Am circuit. I'm finishing up my cage currently and will be needing quite a few parts. If you see something not on the list I'm definitely open to suggestions! Offer it up!
Looking for:
Front coilover conversion, (Spohn definitely preferred.)
Rear Weight-Jack Setup, (250ish springs preferred.. haven't really decided for sure.)
Tubular K-member, (Not super necessary. but wouldn't say no to the right price.)
MAYBE Tubular A-arms? (Probably just gonna fab my own. need lots of steering angle.)
tubular LCAs,
LS1 conversion brackets for the front,
Double U-Joint (Astro) steering shaft,
Nice set of Bucket seats to replace my aluminum full containment bucket,
Again, open to offers and suggestion! Thanks guys!
Last edited by WoodenRegent; Jun 16, 2016 at 09:28 PM. Reason: Updating needed items
Junior Member
Joined: May 2013
Posts: 20
Likes: 0
From: Dallas Tx
Car: 1992 Camaro RS 25th Anniversary
Engine: 305
Transmission: WCT5
Axle/Gears: 3.42 posi ��
Re: WTB Racing Parts DFW
Hey guys! been awhile since I've posted. I'm looking for quite a few things.
I have a 1991 Camaro RS that I'm looking to drive in the 2016 Lonestar Drift Pro-Am circuit. I'm finishing up my cage currently and will be needing quite a few parts. If you see something not on the list I'm definitely open to suggestions! Offer it up!
Looking for:
Front coilover conversion,
Koni shocks,
(Info on rear coilover with koni shocks anyone? otherwise I'll weightjack the rear springs.)
Tubular K-member (Rack and pinion HIGHLY PREFERRED),
MAYBE Tubular A-arms? (Probably just gonna fab my own. need lots of steering angle.)
LCA Relocation brackets,
tubular LCAs,
4th Gen rear end with disk brakes,
LS1 conversion brackets for the front,
Double U-Joint steering shaft,
Floor mount wildwood pedal Box, (Have a reverse swing triple mc currently but would much rather have them on the floor)
Nice set of Bucket seats to replace my aluminum full containment bucket,
Five point harnesses, (Must be Brightish green to match my livery)
Again, open to offers and suggestion! Thanks guys!
I have a 1991 Camaro RS that I'm looking to drive in the 2016 Lonestar Drift Pro-Am circuit. I'm finishing up my cage currently and will be needing quite a few parts. If you see something not on the list I'm definitely open to suggestions! Offer it up!
Looking for:
Front coilover conversion,
Koni shocks,
(Info on rear coilover with koni shocks anyone? otherwise I'll weightjack the rear springs.)
Tubular K-member (Rack and pinion HIGHLY PREFERRED),
MAYBE Tubular A-arms? (Probably just gonna fab my own. need lots of steering angle.)
LCA Relocation brackets,
tubular LCAs,
4th Gen rear end with disk brakes,
LS1 conversion brackets for the front,
Double U-Joint steering shaft,
Floor mount wildwood pedal Box, (Have a reverse swing triple mc currently but would much rather have them on the floor)
Nice set of Bucket seats to replace my aluminum full containment bucket,
Five point harnesses, (Must be Brightish green to match my livery)
Again, open to offers and suggestion! Thanks guys!
Thread Starter
Junior Member
Joined: Mar 2013
Posts: 8
Likes: 0
From: DFW, Texas
Car: 1991 Camaro RS
Engine: 5.8l Aluminum LSX
Transmission: T56
Axle/Gears: 10 Bolt 3.42 "Spooled"
Re: WTB Racing Parts DFW
Bumping to update needed items! I obviously am not making the 2016 season. but with this new job I should definitely be able to make 2017. (Gotta love procrastination)
Junior Member
Joined: May 2013
Posts: 20
Likes: 0
From: Dallas Tx
Car: 1992 Camaro RS 25th Anniversary
Engine: 305
Transmission: WCT5
Axle/Gears: 3.42 posi ��
Thread Starter
Junior Member
Joined: Mar 2013
Posts: 8
Likes: 0
From: DFW, Texas
Car: 1991 Camaro RS
Engine: 5.8l Aluminum LSX
Transmission: T56
Axle/Gears: 10 Bolt 3.42 "Spooled"
Trending Topics
Thread Starter
Junior Member
Joined: Mar 2013
Posts: 8
Likes: 0
From: DFW, Texas
Car: 1991 Camaro RS
Engine: 5.8l Aluminum LSX
Transmission: T56
Axle/Gears: 10 Bolt 3.42 "Spooled"
Joined: Aug 1999
Posts: 5,276
Likes: 469
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: WTB Racing Parts DFW
Adjustable front sway,/ think it's 32, might be 34mm, solid.... $125 + shipping.
Thread
Thread Starter
Forum
Replies
Last Post
z28wiz
Camaros for Sale
9
Jan 19, 2016 09:28 PM
Maredjathis
Tech / General Engine
14
Nov 9, 2015 08:00 AM