A couple years back there was someone selling the front brake conversion kit to run 4th gen brakes on a third gen. It was the hub, cut spindle and the fabricated mounting bracket. Any help would be appreciated.

Big brake upgrade sells the kits. Just look them up. You can save some money piecing most of the stuff yourself. I bought the adapters and the hubs from there and was extremely happy. I modified my spindles and bought some rebuilt caliper and rear backing plates on eBay along with rotors and pads. It saved me a good bit of money. I did the front and rear for around 1k. There are good write ups on here about the work. Also on Luke skaff website.

I did the big brake upgrade and it was worth it for my needs, they are a quality vendor

This is exactly what I was looking for: http://bigbrakeupgrade.com/product/l...al-conversion/
Big thank you guys!