engine and tranny NEEDED
engine and tranny NEEDED
ok so im looking for a stock 5.7L v8 and the matching 5 speed tranny, for my 89 camaro, its not the actual stock engine in this car, but its the one i want... anyone that can help me i have plenty to offer in trade,
i have an 89 rs camaro rolling chassis
i have a sleeved sbc 350 engine
i have a TH350 tranny
im into camaro restoration, and the 89 is my first project, i want to do a complete one before i do any other years.
let me know if you can help, i am in southeastern wisconsin.
Thanks, Trevor
also, i want to know what people think of the 5.7L and the 5 speed manual paired
i have an 89 rs camaro rolling chassis
i have a sleeved sbc 350 engine
i have a TH350 tranny
im into camaro restoration, and the 89 is my first project, i want to do a complete one before i do any other years.
let me know if you can help, i am in southeastern wisconsin.
Thanks, Trevor
also, i want to know what people think of the 5.7L and the 5 speed manual paired
Junior Member
Joined: Oct 2008
Posts: 3
Likes: 0
From: Topeka
Car: 86' Iroc-z
Engine: 427 Ci. sbc
Transmission: 700r4 w/ 3k stall
Axle/Gears: ford 8.8 w/ 3.73's
Re: engine and tranny NEEDED
well I can't help ya out with a stock engine/tranny set up but if your wanting to sell of that 89' rs send me some pic's, lt1tj@hotmail.com or if your needing an lt1, 4l60e, or a few other 4th gen. parts we could talk about a trade + cash.
Supreme Member
Joined: Apr 2002
Posts: 3,552
Likes: 5
From: New Jersey
Car: 86 Corvette, 89 IROC, 1999 TA
Engine: 350, 350, LS1
Transmission: 700r4, 700r4, T-56
Axle/Gears: 3.07, 373, 4.10
Re: engine and tranny NEEDED
As far as a matching 5 speed there was never a 350 5 speed from the factory in a third gen f-body. T-5's arn't the strongest trannies in the world but they will survive behind a 350 provided you don't beat on it too much and take it easy on it. I ran one in my old rs for several years with no troubles. If you have the money there are better options out there if you are planning on a high powered application. Why are you looking for another 350 if you already have one? Why not use what you have and simply find a t-5 to throw in back of it? Was this car origionally automatic or was it stick? If it was origionally auto you would probably do best finding everything you need at a local you-pull-it type yard, that's what I did, or find a donor car for parts.
Thread
Thread Starter
Forum
Replies
Last Post
Zachattack0925
Tech / General Engine
2
Aug 12, 2015 09:54 PM
Zachattack0925
Transmissions and Drivetrain
4
Aug 12, 2015 09:52 PM




