Will 89 tpi parts fit a 86tpi setup
Thread Starter
Junior Member
Joined: Jun 2007
Posts: 13
Likes: 1
From: North Central Wisconsin
Car: Monte Carlo SS
Engine: 305 W/TPI
Transmission: 2004r
Axle/Gears: 3:73 Posi
Will 89 tpi parts fit a 86tpi setup
I was given a 89 tpi setup and I am running 86 setup. It has slp runners will they fit my current setup.
Member
Joined: Jun 2009
Posts: 344
Likes: 0
From: Southern California
Car: 1992 Camaro RS
Engine: 8.0:1 454/Mild Hyd roller/Accel DFI
Transmission: WC T5
Axle/Gears: Stock 1992 open 7.5" 2.73 ratio
Re: Will 89 tpi parts fit a 86tpi setup
So far as I know there are two types of TPI...... 85-89 and 90-92. IIRC all the parts from the same vintage manifolds will interchange. Besides that the only difference is that corvettes all used one fuel rail and camaros/firebirds all used another. Corvette fuel rails terminate on the passenger side and camaro firebird fuel rails terminate on the driver side.
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
The runners should fit.
'89 didn't have the cold start injector like the '85-'88 MAF systems did. But that's in the plenum.
'89 didn't have the cold start injector like the '85-'88 MAF systems did. But that's in the plenum.
Senior Member
iTrader: (10)
Joined: Jan 2009
Posts: 718
Likes: 1
From: Edmonton, Alberta.
Car: 1988 Pontiac Trans Am GTA.
Engine: 385 stroker sbc
Transmission: TKO600
Axle/Gears: Moser 9" 3.70 Wavetrac
Re: Will 89 tpi parts fit a 86tpi setup
If you have an 86 setup, 89-92 runners will work, but youll need to plug your fuel rail where the 9th injector comes out of. And you will need an 89-92 plenum as well.
Is this all correct?
Is this all correct?
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
Jun 13, 2021 01:13 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 12, 2015 03:41 PM
