I'm getting ready to start this swap in the summer but with tax time around the corner I was thinking of getting parts now. My question is which parts from the V6 can I use on the 350? Thanks guys, and I will post pictures as I go, I will also be painting this summer lol

 

are u doing a carb swap or fuel injection swap?

nothing from the v6 can be reused including the transmission
u have to change the front springs to v8 springs and also change the engine mounts

 

The v6 is fuel injected and the 350 is carb...

 

u will have to change the fuel pump in the tank.modify the sending unit to use a mechanical or low presure pump

or u can leave the stock pump and run a return style regulattor to ring fuel presure down to 4.5-7 psi

 

https://www.thirdgen.org/carbswap
http://5finger.8m.com/tpi2carb/tpi2carb.html

and a lockup control for the convertor if running a T700 trans
https://www.thirdgen.org/forums/carb...c-control.html

 

I have a 700R4 trans

 

Are you talking about the TH700 behind your V6, or something else?