454 machine work 2 bolt ARP studded block, bored .030, hot tanked, crankshaft bore checked out fine. cylinders have been finished honed to pistons.
Eagle ESP 4340 crankshaft Std/Std with Clevite H rod and main bearings
Summit Racing sfi damper and sfi flexplate
Eagle ESP 4340 Hbeams with Arp2000 bolts
Mahle Powerpak pistons with moly rings. 8.0:1 Cr
Electronically balanced within +/- .5gram
Comp Cams NX298HR, 298/310 2400-6500 242/252 @ .050
Crane Hyd roller lifters. these are used but were sent to crane and check out fine. matching comp springs
049 fully ported oval port bare heads
Mellings HV oil pump.
Moroso chrome pan with pickup.
MSD pro billet HEI distr. Used condition but very nice
MSD 6al
MSD BTM Module
BorgWarner Airwerks S475, with T6 1.32 A/R Twin Scroll Turbine Housing.
Rated at 500 to 1050+HP
High-flow S400 model, with compressor flow over 105 lb/min.

Wheel Dimensions:
Compressor: 74.7 mm inducer, 100.8mm exducer, with Extended Tip Technology.
Turbine: 95.5 inducer, 87.9mm exducer.
Housings: Compressor: .63, with 5.0" hose-type inlet, and v-band-type discharge.
Turbine: T6 1.32 A/R, with twin volute, T6 turbine inlet flange, and quick-release v-band discharge flange. Cast in ductile iron.
*Custom made upsweeping turbo manifold. was made for a tall deck and will need to be modified to work with a std deck block.

 

Does this seem like a well matched combo? Cam number is 11-414-8