What is everyone else using for the transmissions for similar swaps? I was looking into the T56 but not sure how well everything will match up and work. Anyone else have any experience doing this? Any help is appreciated!
** Looking for Manual conversions **
** Looking for Manual conversions **
Stock auto rebuilt to handle it
Looking for it to be a manual!
MSgt Luttrell
Member
close
I'm using a 700R4 from TCI................
Quote:
700R4 is Auto, right?Originally Posted by MSgt Luttrell
I'm using a 700R4 from TCI................ Manual then go t56 from lt1 4th gen
Quote:
That was my question, T56 bolt right up to the std 350 block with little to no modifications?Originally Posted by Orr89RocZ
Manual then go t56 from lt1 4th gen MSgt Luttrell
Member
close
Quote:
Yes, it's an automatic.Originally Posted by GMan2012
700R4 is Auto, right? Saxondale
Senior Member
close
- Join DateOct 2014
- Posts:749
- iTrader Positive Feedback100
- iTrader Feedback Score(2)
- Car84 Z
- Likes:129
- Liked:110 Times in 56 Posts
Interested in answer to your T56 question, too. I know there are other threads on T56 swap, but could use a good general overview, not too long, but including "problems" with the swap. (I'm now off to the transmission forum!)
Many of those transmission discussions are many pages long. Don't want to sort through all!
Many of those transmission discussions are many pages long. Don't want to sort through all!
five7kid
Moderator
close
Quote:
Is your 383 one-piece rear main seal or two-piece rear main seal; external balance or internal balance?Originally Posted by GMan2012
That was my question, T56 bolt right up to the std 350 block with little to no modifications?





