Engine swap question
Joined: Feb 2001
Posts: 13,753
Likes: 560
From: Cincinnati, OH
Car: '90 RS
Engine: 377 LSX
Transmission: Magnum T56
Joined: Dec 2004
Posts: 16,751
Likes: 996
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Engine swap question
The oil pan and pickup needs to be changed.
You will also want to get a tune for the engine. The corvettes prom will work but vats needs to be eliminated in the tune.
You might want to use the corvette intake other wise you need to elongate the center four bolt holes. IMO the corvette base is better it has a coolant crossover.
If your in a emissions testing area the 113 heads don’t have egr provisions.
The egr feed is done from the manifold to the rear of the intake feed.
You will also want to get a tune for the engine. The corvettes prom will work but vats needs to be eliminated in the tune.
You might want to use the corvette intake other wise you need to elongate the center four bolt holes. IMO the corvette base is better it has a coolant crossover.
If your in a emissions testing area the 113 heads don’t have egr provisions.
The egr feed is done from the manifold to the rear of the intake feed.
Thread
Thread Starter
Forum
Replies
Last Post
meanblackZ
Tech / General Engine
1
May 7, 2002 11:36 AM
smurfmobile
Tech / General Engine
2
Aug 19, 2001 12:55 PM
chooch-88formula
Engine Swap
14
Jul 12, 2001 03:39 PM
TomP
Tech / General Engine
8
Feb 16, 2001 06:37 PM