383 Stroker EFI HP projections
Thread Starter
Junior Member
Joined: Nov 2019
Posts: 3
Likes: 0
From: Brandon, Manitoba
Car: 88' TA
Engine: 383 EFI stroker
Transmission: T-56
Axle/Gears: 3.45
383 Stroker EFI HP projections
Hi there. As I start to get ready to have this engine built I am trying to get a rough estimation of what the dialed-in HP be so that I can select the proper ECM to apply to the motor. Here's my set up...
Holley stealth ram w/ new fuel rails
AFR heads 76cc 195s
36 lb Bosch 3 fuel injectors
52 mm BBK throttle body
Underdrive pulleys
cold air intake
Scorpion 1.5 rocker rollers
Axle ratio is 3.45
LT1 T-56 6 speed transmission
Properly built and all things considered what should I expect for HP at the crank?
Appreciate your help
Holley stealth ram w/ new fuel rails
AFR heads 76cc 195s
36 lb Bosch 3 fuel injectors
52 mm BBK throttle body
Underdrive pulleys
cold air intake
Scorpion 1.5 rocker rollers
COMP Cams Computer-Controlled Cam and Lifter Kits CL08-305-8
- Lift: .510"/.510"
- Advertised Duration: 276°/290°
- Lobe Separation Angle: 114°
Axle ratio is 3.45
LT1 T-56 6 speed transmission
Properly built and all things considered what should I expect for HP at the crank?
Appreciate your help
Thread
Thread Starter
Forum
Replies
Last Post