I've got a 91 305 TPI that's MAP and running on 7 cylinders but I have a complete 88 350 that's MAF.
can I just install the entire intake, plenum and runners off the 305 map engine onto the 350 MAF block and be good?
I do have a computer for a MAP 350 engine to install to.

 

Drivers side runner , plenum, tb and injectors could be swapped , use a aujp or anjf chip in the speed density ecm.

 

I'm sorry if I ask a dumb question cause I have no idea about any of this swap.

So I couldn't pull the entire intake system off the 305 and put on the 350?

Also I bought a computer for a 91 350 automatic, i would still have to change a chip?
I appreciate your help and info.

 

you could swap the entire intake but injectors need to be 22#hr not 19#hr.

 

gotcha. The engine I'm getting has those so I can swap them.
I just found out it's actually a engine I believe you have tuned on at one point and I bought the 350 auto computer from you.
I appreciate all your information.