Getting cat-back have questions.
Thread Starter
Senior Member
Joined: Jun 2001
Posts: 609
Likes: 2
From: Pearland, Texas
Getting cat-back have questions.
I am getting a cat-back but I'm not exactly sure which one to get. Most catalogs don't list a lot of info. I want a 3" internediate pipe and tailpipes on the opposite sides. Tips are not important ( I want some like FiReBReTHa has ), don't need stainless. What do you guys recommend. I want a deep rumble at idle, and I want to scream when I get on it. I like the way the Hooker system sounds, but haven't found anything about its size. Thanks.
Junior Member
Joined: Aug 2001
Posts: 55
Likes: 0
From: wisconsin
Look online at jegs, and it will show u the specs on it,and which one is right for u.
------------------
I Love Smokin Tires
Always remember the dayz when ya cruzin down the strip WITH THE DIAMOND IN THE BACK and the SUNROOF TOP when ya DIGGIN THE SCENE with tha GANSTA LEAN (WOO WOO)
(It dont get much better than that)
------------------
I Love Smokin Tires
Always remember the dayz when ya cruzin down the strip WITH THE DIAMOND IN THE BACK and the SUNROOF TOP when ya DIGGIN THE SCENE with tha GANSTA LEAN (WOO WOO)
(It dont get much better than that)
Supreme Member
Joined: Jan 2001
Posts: 7,164
Likes: 1
From: Someone owes me 10,000 posts
Car: 99 Formula
Engine: LS1
Transmission: T56
Axle/Gears: 342
<font face="Verdana, Arial" size="2">Originally posted by BitchinCamaro:
I have the Hooker, it is a 3 in. I-pipe, with dual 2.5 exit pipes. I love the way it sounds and it's quality is A+. </font>
I have the Hooker, it is a 3 in. I-pipe, with dual 2.5 exit pipes. I love the way it sounds and it's quality is A+. </font>
------------------
2 Tickets to game= $250
Gas= $20
Sitting 20ft. from MJ= Priceless
'86 IROC T-TOPS, TINTED WINDOWS, BRAKE LIGHT BLACKOUTS
GM GOODWRENCH 350
EDELBROCK HEADERS Hooker CatBack
EDELBROCK 600CFM CARB.
KN AIRFILTER
ACCEL HEI DISTRIBUTOR
160* Stat, just switched to 180* b/c of winter coming and going to college in the mts.
3:73 Posi Rebuilt 700R4
B&M Megashifter, 5" Autometer Tach w/shift lite
! Its a lot cheaper too! More money for other stuff! Thanks guys! Trending Topics
Thread Starter
Senior Member
Joined: Jun 2001
Posts: 609
Likes: 2
From: Pearland, Texas
Ok, went to jegs online. Hooker has two kits for my car, one is for H.O. and TPI, the other is for low-performance 305s like mine. I am also adding a 3" cat, and adding TPI exhaust manifolds and a new y-pipe. So I need the H.O. system right? I think it is the one with the 3" I-pipe, right?
Junior Member
Joined: Aug 2001
Posts: 55
Likes: 0
From: wisconsin
All of the hooker systems are 3 inch, the only difference is how they bolt on to the cat.I think the Ho is for a 4 bolt flanged cat, and the non Ho has a 2 bolt flange.I just put a 3 inch pipe in place of my cat and welded it.
------------------
I Love Smokin Tires
Always remember the dayz when ya cruzin down the strip WITH THE DIAMOND IN THE BACK and the SUNROOF TOP when ya DIGGIN THE SCENE with tha GANSTA LEAN (WOO WOO)
(It dont get much better than that)
------------------
I Love Smokin Tires
Always remember the dayz when ya cruzin down the strip WITH THE DIAMOND IN THE BACK and the SUNROOF TOP when ya DIGGIN THE SCENE with tha GANSTA LEAN (WOO WOO)
(It dont get much better than that)
Joined: Jul 2000
Posts: 7,386
Likes: 1
From: In a mint Third Gen!
Car: Red 87 IROC-Z28 T-Top
Engine: 5.7 Tuned Port Injection
Transmission: 700R4 Auto
Axle/Gears: BW 9-Bolt 3.27
U might wanna listen to both 1st. I have and like Flowmaster better.
Thread
Thread Starter
Forum
Replies
Last Post
Royal_Z
Engine/Drivetrain/Suspension Parts for Sale
4
Sep 30, 2015 08:45 PM
raymondandretti
Electronics
1
Sep 27, 2015 06:43 PM