I am getting a cat-back but I'm not exactly sure which one to get. Most catalogs don't list a lot of info. I want a 3" internediate pipe and tailpipes on the opposite sides. Tips are not important ( I want some like FiReBReTHa has ), don't need stainless. What do you guys recommend. I want a deep rumble at idle, and I want to scream when I get on it. I like the way the Hooker system sounds, but haven't found anything about its size. Thanks.
Junior Member
I have flowmaster exhaust system and love it. they come with dual outlets and polished pipes to add a nice look at the rear.
I like Flowmaster sound too. Is it the 3" American Thunder system, I keep seeing ads for this? Any pics?
Member
I have the Hooker, it is a 3 in. I-pipe, with dual 2.5 exit pipes. I love the way it sounds and it's quality is A+.
Junior Member
Look online at jegs, and it will show u the specs on it,and which one is right for u.
------------------
I Love Smokin Tires
Always remember the dayz when ya cruzin down the strip WITH THE DIAMOND IN THE BACK and the SUNROOF TOP when ya DIGGIN THE SCENE with tha GANSTA LEAN (WOO WOO)
(It dont get much better than that)
------------------
I Love Smokin Tires
Always remember the dayz when ya cruzin down the strip WITH THE DIAMOND IN THE BACK and the SUNROOF TOP when ya DIGGIN THE SCENE with tha GANSTA LEAN (WOO WOO)
(It dont get much better than that)
Quote:
<font face="Verdana, Arial" size="2">Originally posted by BitchinCamaro:
I have the Hooker, it is a 3 in. I-pipe, with dual 2.5 exit pipes. I love the way it sounds and it's quality is A+. </font>
I agree completely, I wouldn't go any other way, and even comes with some nice tips. There are sound clips of it on this board.<font face="Verdana, Arial" size="2">Originally posted by BitchinCamaro:
I have the Hooker, it is a 3 in. I-pipe, with dual 2.5 exit pipes. I love the way it sounds and it's quality is A+. </font>
------------------
2 Tickets to game= $250
Gas= $20
Sitting 20ft. from MJ= Priceless
'86 IROC T-TOPS, TINTED WINDOWS, BRAKE LIGHT BLACKOUTS
GM GOODWRENCH 350
EDELBROCK HEADERS Hooker CatBack
EDELBROCK 600CFM CARB.
KN AIRFILTER
ACCEL HEI DISTRIBUTOR
160* Stat, just switched to 180* b/c of winter coming and going to college in the mts.
3:73 Posi Rebuilt 700R4
B&M Megashifter, 5" Autometer Tach w/shift lite
The Hooker is 3" I-pipe and 2.5" outlets on opposite sides. Sweet
! Its a lot cheaper too! More money for other stuff! Thanks guys!
! Its a lot cheaper too! More money for other stuff! Thanks guys!Ok, went to jegs online. Hooker has two kits for my car, one is for H.O. and TPI, the other is for low-performance 305s like mine. I am also adding a 3" cat, and adding TPI exhaust manifolds and a new y-pipe. So I need the H.O. system right? I think it is the one with the 3" I-pipe, right?
Junior Member
All of the hooker systems are 3 inch, the only difference is how they bolt on to the cat.I think the Ho is for a 4 bolt flanged cat, and the non Ho has a 2 bolt flange.I just put a 3 inch pipe in place of my cat and welded it.
------------------
I Love Smokin Tires
Always remember the dayz when ya cruzin down the strip WITH THE DIAMOND IN THE BACK and the SUNROOF TOP when ya DIGGIN THE SCENE with tha GANSTA LEAN (WOO WOO)
(It dont get much better than that)
------------------
I Love Smokin Tires
Always remember the dayz when ya cruzin down the strip WITH THE DIAMOND IN THE BACK and the SUNROOF TOP when ya DIGGIN THE SCENE with tha GANSTA LEAN (WOO WOO)
(It dont get much better than that)
IROCZTWENTYGR8
Administrator
close
U might wanna listen to both 1st. I have and like Flowmaster better.



