Does anyone know the part number for the hooker super comp long tubes with the ceramic caoting? Also where can I get the mufflex y-pipe and the part number for that?

 

The headers part number is 2210 and the y pipe part number from mufflex is TPI-Y , thats with out the 02 sensor the one with the o2 sensor is TPI-Y 02

 

from my experience, the mufflex y pipe doesnt fit worth a ****.....looks like im gonna have to pay an exhaust shop to hack it up and bend some tubes tighter for me

 

Well I have 2 custom exhaust specialists right down the street from me so would I be better of getting them to make me up one? Also isnt the 2210 number just for the regular long tube or is that for the ceramic coated one aswell?

 

2210-1 is the coated ones.

 

For the y-pipe do i just order a 4th gen long tube y-pipe? I havent seen any for 3rd gens only ones for lt-1s

 

keep lookin at mufflex site, there is a one for 3rdgens. actually theres 2 for 3rd gens becuzo ne comes with o2 sensor holes and the other does.

 

Yea but i heard that one sucked so Im trying to stay away from the mufflex one. Thunder racing has one but they dont have a price or anything they just show pics

 

Try this site. This guy makes this stuff, well he made one for me.

www.cp-performance.com

 

Oops, that was .net, not .com

 

Mc do you have any pics of it installed? How is the clearance and fit?

 

I haven't had a chance to get under the car and take any pictures of it installed but it fits really good. It is a tad low to the ground. The lowest point is 3-1/2" away.

Here is a picture of just the y-pipe (not installed, obviously)

 

Ok thanks 3 1/2 isnt that bad. So do I have to email the guy to order it? I didnt see any ordering info so...

 

Well, I would email him first just to make sure that he can do it. Just so you know, you will need to have the rest of the system custom made. I was lucky enough to find an intermediate pipe from a 3" system and the guy that I had finish it just cut off the part that goes to the converter. I will try to get more pictures so you can see what i'm talking about.

 

Well I already have a flowmaster cat-back so cant i just cut of the part that goes to the cat and use that?

 

Yes, i'm pretty sure that will work.