Exhuast for a 5.7 on a 5.0
Thread Starter
Junior Member
Joined: Dec 2015
Posts: 77
Likes: 0
From: Boyertown, Pennsylvania
Car: Firebird
Engine: 305 tbi
Transmission: 700r4
Exhuast for a 5.7 on a 5.0
I'm looking for an exhaust system for my 91 firebird with a 305 tbi. I want something loud like the slp loudmouth system. I was wondering if I could put it on even though it's made for a 5.7 liter rather than my 5.0
Joined: Sep 2005
Posts: 28,003
Likes: 2,486
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Exhuast for a 5.7 on a 5.0
5.0 and 5.7 (305 and 350) are indistinguishable externally except by casting numbers and the like.
So yes, it will absolutely bolt right up and work. Might not be as "ideal" for 305 as it could; but when you get tired of that gutless POS and throw it in the trash like any sensible person does so they can upgrade to the "standard" small block, the 350, you won't be saddled with something you bought mistakenly that's only appropriate for the lame 305 that now impedes your progress.
So yes, it will absolutely bolt right up and work. Might not be as "ideal" for 305 as it could; but when you get tired of that gutless POS and throw it in the trash like any sensible person does so they can upgrade to the "standard" small block, the 350, you won't be saddled with something you bought mistakenly that's only appropriate for the lame 305 that now impedes your progress.
Thread Starter
Junior Member
Joined: Dec 2015
Posts: 77
Likes: 0
From: Boyertown, Pennsylvania
Car: Firebird
Engine: 305 tbi
Transmission: 700r4
Re: Exhuast for a 5.7 on a 5.0
5.0 and 5.7 (305 and 350) are indistinguishable externally except by casting numbers and the like.
So yes, it will absolutely bolt right up and work. Might not be as "ideal" for 305 as it could; but when you get tired of that gutless POS and throw it in the trash like any sensible person does so they can upgrade to the "standard" small block, the 350, you won't be saddled with something you bought mistakenly that's only appropriate for the lame 305 that now impedes your progress.
So yes, it will absolutely bolt right up and work. Might not be as "ideal" for 305 as it could; but when you get tired of that gutless POS and throw it in the trash like any sensible person does so they can upgrade to the "standard" small block, the 350, you won't be saddled with something you bought mistakenly that's only appropriate for the lame 305 that now impedes your progress.
Joined: Sep 2005
Posts: 28,003
Likes: 2,486
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Exhuast for a 5.7 on a 5.0
There was more to it than "cheeeeeeeeper", in those days; although, as we all know, sooner or later, it all comes down to that. (i.e. if we REALLY WANTED TO, we could spend the money accomplish WHATEVER, but ... we put 305s in cars that were supposed to be "performance" so that just goes to show...) Not really a truck motor, just go drive a truck that has a 305 in it and try to load it with something simple like firewood or the like, or tow a boat or something. That motor NEVER should have existed in anything besides econo s***boxes.
Last edited by sofakingdom; Jan 30, 2016 at 10:02 PM.
Joined: Aug 2013
Posts: 4,840
Likes: 922
From: MICHIGAN
Car: 1988 Trans Am
Engine: L03
Transmission: 700R4
Axle/Gears: 10 Bolt 2.73 Open
Re: Exhuast for a 5.7 on a 5.0
I towed our 18' travel trailer with our '95 G20 van with L03...it did just fine.
Supreme Member
Joined: Jul 2007
Posts: 1,293
Likes: 6
From: Howard Lake, MN
Car: 86 Camaro
Engine: 355- hopefully a 5.3 this summer
Transmission: 700r4
Axle/Gears: 3.42
Re: Exhuast for a 5.7 on a 5.0
pretty sure the 350 (5.7) had exhaust manifolds with bigger outlets than the 305 (5.0) did, so it might not be a straight bolt up deal unless you get the proper manifolds, too.
Junior Member
Joined: Jun 2010
Posts: 8
Likes: 0
From: Tyro va
Car: 92 Z/28...many more !
Engine: LY6 / pro charger
Transmission: 4L70E 5000 stall
Axle/Gears: Moser 9" 3.89 gear
Re: Exhuast for a 5.7 on a 5.0
I'm new to this sight cant find how to post parts
can anyone help !!!!!!
can anyone help !!!!!! Trending Topics
Thread Starter
Junior Member
Joined: Dec 2015
Posts: 77
Likes: 0
From: Boyertown, Pennsylvania
Car: Firebird
Engine: 305 tbi
Transmission: 700r4
Member
Joined: Jun 2012
Posts: 145
Likes: 1
From: Cambridge, MD
Car: 88 Firebird, 87 Formula
Engine: 2.8, 5.0
Transmission: both 700R4
Axle/Gears: 3.42,3.45
Re: Exhuast for a 5.7 on a 5.0
I have a Loudmouth1 on my 305 Formula. It will be loud! I also have shorty headers and a 2-1/2" feed to the cat-back, no cat...
Enjoy!
Enjoy!
Last edited by a62belair; Feb 9, 2016 at 09:45 PM. Reason: grammar
Member
iTrader: (2)
Joined: Nov 2013
Posts: 297
Likes: 0
From: Freehold NJ
Car: 87 Iroc 5.7,67 SS Camaro,90 Formula
Engine: 355 AFR Superram LPE 219
Transmission: 700r4 3000 stall 4spd 5 spd
Axle/Gears: 3.27
Re: Exhuast for a 5.7 on a 5.0
I hear a Tpi y pipe will add hp and Lt1 cats will too. Prob make it sound better or louder too... Someone who knows more can chime in here.
Thread
Thread Starter
Forum
Replies
Last Post
89gta140
Electronics
0
Jan 25, 2016 06:09 PM










