Heat riser gasket?
Joined: Sep 2005
Posts: 27,869
Likes: 2,429
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Heat riser gasket?
There were no gaskets on any of that from the factory.
Between the manifold and the valve, if you look around in the exhaust gasket aisle behind the counter at your local corner parts store, you'll be able to find one that fits, if you just REALLY want to put something in there that's guaranteed to fail. Between the Y-pipe and the valve, you just gotta clean up the surfaces with sanding or grinding or whatever.
Between the manifold and the valve, if you look around in the exhaust gasket aisle behind the counter at your local corner parts store, you'll be able to find one that fits, if you just REALLY want to put something in there that's guaranteed to fail. Between the Y-pipe and the valve, you just gotta clean up the surfaces with sanding or grinding or whatever.
Junior Member
Joined: May 2009
Posts: 38
Likes: 1
From: New York
Car: 1985 Z28
Engine: 305
Transmission: T5
Axle/Gears: 3.23
Re: Heat riser gasket?
As mentioned, there isn't supposed to be a gasket here. But if you need one, Walker part # 31307 is a good fit for the HO/TPI manifolds and I believe it would work for the other manifolds too.
Thread
Thread Starter
Forum
Replies
Last Post