Exhaust Post your questions and suggestions about stock or aftermarket exhaust setups. Third Gen exhaust sound files and videos!

what can i DO?????

Thread Tools
 
Search this Thread
 
Old Mar 21, 2002 | 09:24 PM
  #1  
breathment's Avatar
Thread Starter
Supreme Member
 
Joined: Jun 2001
Posts: 3,175
Likes: 1
From: Bedford, Tx
what can i DO?????

i just installed SLP headers and y-pipe.. and i needed a cat adapter.. and being me I forgot to order it. And it will be at least a week before i get the cat adapter in.. So now i have a huge gap inbetween my cat and y-pipe. and its TOO loud to drive anywhere. i thought about cutting a piece of the stock y-pipe and sticking it in there Temporarily. but one end is round and the other end is all weird shaped, so i don't know if it would fit or not. plus i want to be able to sell the stock manifolds and y-pipe for $40 or so.... does anyone know what i can use for a temp. cat adapter????
Reply
Old Mar 21, 2002 | 09:43 PM
  #2  
Marshall89ws6's Avatar
Member
 
Joined: Mar 2002
Posts: 342
Likes: 0
From: phila pa
i have no f-ing clue of what u can do...... that is a stumper. but i would just be an a s s hole and drive it around even if it is sickeningly loud.
Reply
Old Mar 21, 2002 | 10:25 PM
  #3  
breathment's Avatar
Thread Starter
Supreme Member
 
Joined: Jun 2001
Posts: 3,175
Likes: 1
From: Bedford, Tx
i would, but i don't wanna risk getting pulled over and getting a ticket for noise and bypassing the cat!! plus it hurts my ears
Reply
Old Mar 21, 2002 | 11:01 PM
  #4  
vic_V8's Avatar
Supreme Member
 
Joined: Mar 2001
Posts: 1,818
Likes: 0
From: Dixon, IL
Car: RS
Engine: 305
Transmission: 4L60
Axle/Gears: 3.42
i'd drive it too

what about a piece of exhaust condoit (I can't spell, you know the flexy stuff)
Reply
Old Mar 21, 2002 | 11:13 PM
  #5  
breathment's Avatar
Thread Starter
Supreme Member
 
Joined: Jun 2001
Posts: 3,175
Likes: 1
From: Bedford, Tx
couldn't find any 3" diam. only 2.5
Reply
Old Mar 23, 2002 | 01:57 AM
  #6  
racereddy20's Avatar
Member
 
Joined: Mar 2002
Posts: 193
Likes: 0
I just installed headers on mine this wendsay. It took longer than expected because i ran into minor problems (like the stock y pipe being tack welded onto the cat and being to long for clearance reasons). I knew that the stock Y was gonna have to go. I used a cutter tool to remove the tack weld. I pulled the y off. By the time I finished it was 8:00PM and the muffler shop wasnt going to be open till 9:00AM the next day. I was about 10 miles from my house (I did it at a shop that my cousin works at, and it saved me a bunch of headaches). I drove the car home with the headers unplugged. It was so loud that i could feel the vibrations throughout the floor of my car. It was kinda funny too because if I revved over 1500RPM it became so damn loud I thought the sound police would get me for sure. When I got home my little boy ran out with this confused look on his face. Then the next day I drove it to the muffler shop and I floored it on purpose. When will be the next time I get to drive a car that sounds like an all out race car. When picked the car up later that day I was kinda dissapointed that it wasnt loud anymore, but I was pleasantly surprised by the deeper tone my car took.
Reply
Old Mar 23, 2002 | 12:19 PM
  #7  
irocEOK's Avatar
Junior Member
 
Joined: Sep 2000
Posts: 89
Likes: 0
From: b-lo NY
ha ha! i really like the part about your boy running out all confused! kid prob
thought you bought a harley! anyways, if your driving that only to a shop,
just stick anything on there, who cares seeing if its only like 5 - 10 miles away!
and if you get pulled over, just tell the cop that your going to a shop, unless
the cops a complete donut-eatin dick, he shouldnt write any tickets!
Reply
Old Mar 23, 2002 | 12:50 PM
  #8  
breathment's Avatar
Thread Starter
Supreme Member
 
Joined: Jun 2001
Posts: 3,175
Likes: 1
From: Bedford, Tx
the shop wont do the work because my cat is gutted...... so im gonna order the adapter from SLP. but that means i have to wait until mon-tue. and we have a car club meeting on sunday...
Reply
Old Mar 23, 2002 | 07:16 PM
  #9  
Tas's Avatar
Tas
Supreme Member
 
Joined: Jul 1999
Posts: 4,310
Likes: 1
pep boys. get a exaust tip that looks like that and cut the shiny end off.
Reply




All times are GMT -5. The time now is 10:30 AM.