I was thinking adding sequential LED tail lights. I am thinking of doing them a little different then others have done. I have the standard tail lights with the black stripe across the middle so I was thinking of finding some sort of short amber LED strip lights and having the work with one of the sequential controllers. I am having having a hard time finding short strip lights that would work unless I come up with at way of covering them some how.

Does anyone have any ideas?

 

Did you try the led light stripes they sell at autozone and other places similar? I can't find the post now but a guy on here made his own sequential relays using different resistors in line with the tail lights he even had a wire diagram in his post

 

this guy i work with used the ones at www.superbrightleds.com

 

ebay has 5 meter rolls that you can cut into the needed lengths.

 

that was stephen, hessince been banned so idk how to get sts modules now he sold them in sets for pretty cheap and all ya did was splice your harness in and they'd work

 

BigBadLou sells them for $56 shipped. they arn't to hard to install and look great once you install an electronic flasher. I have the Berlinetta which has the single black stripe through the middle as well and im very satisfied with the outcome, if you are interested ill post a video of them in action.

 

And what Stephen was selling was the ones built by BigBadLou. I have one of those units which has worked great for years now. And last I heard (last month) was that BigBadLou had some built & ready to ship.

 

yeah I was gonna say I thought they worked together on those, but I wasn't sure if I was remembering correctly or not. I bought one of Lou's around a month and a half ago and he still had plenty to sell.

 

I have plenty STS units built. If anybody wants one, just drop me a PM or post here.

Lou

 

I thought that you had made a video showing them off? I cant seem to find it.

 

There are YouTue videos on my STS page.
Videos are courtesy of Stephen whose white GTA has had the original STS unit prototype since 2006.

 

@Lou, I's like to know more about your STS for a Camaro?

 

I would like to avoid littering this thread so here is an STS thread where we discuss installation even on Camaro models:
https://www.thirdgen.org/forums/elec...als-batch.html

Lou

 

Was'nt the OP looking for LED sequential though.

 

there is a company making stock replacement style led bulbs we sell them at my az store, wouldn't the aforementioned module for the sts work with new stlye led bulbs just fine, i'm not wiring expert but it should no?

 

I would be very interested to see a good video on someone who has installed them into their 3rd gen.. I think it can be done, but would like to know how they mounted their additional brake bulbs or set it up.. I have seen some of the new mustangs do it and I want it..

 

I am looking for a way of doing LED lights in addition to the stock lights which I would keep and possibly change the bulbs to LED. So the 2 ways I'm thinking of doing this one is to find short strip lights that have a finished look and mount flat or the other way is to use the strips of LED's that would stick to the top of the stock housing and shine to the back so it would fill the gap between the hatch and the lights. Each way would have have 3 on each side to do the sequential lights, plus maybe a red section that would work with the brake light.

Right now I'm just doing some planning and research, it will be a little while before I have the cash flow to be spending on the Camaro.

 

if you just want a strip of LEDs for the sequence I am positive that pep boys sells a sequencing led strip, usually used for under the tailgate of trucks but the strip can be cut shorter. I thought you wanted just LED bulbs for tail lights and have them sequence.

 

I want to keep it close to stock look so it wouldn't work well to make those sequential. I haven't looked at those strips meant for trucks, but my first thought is that those are meant to mount in a "hidden" location and they are red and I was wanting the strip to be amber for the turn signal, but I wouldn't mind having part of it being red to supplement the stock brake light.

 

I was at pep boys here in the springs today for some things and took a look at the LED strips, the ones they had currently were around $40 and did amber sequential and a white led for parking light as well. I have seen others before that are amber sequential only, maybe Denver will have better choices. One of the guys in our cc has LED strips under the rear lenses, well hidden and yet completely visible when on. Just some ideas for ya.

 

If it helps I know aguy that can take your tail lights and fully convert them to led plug and play pm me for more info

 

I am interested in getting these

 

I just purchased mine and they are sequential.. I haven't got them installed am working on it now.

https://www.classicindustries.com/search?q=500889

Currently working on website but will upload pics

 

If you want to just replace your factory bulbs with led's go here and type in your car make model and year and it will give you led bulbs numbers for every light on your car.
www.superbrightleds.com