I'm selling off my baby! It had the oil pump go out in it and the motor just got rebuilt and is fresh! Here is a list of details;
<?XML:NAMESPACE PREFIX = O /><o:p></o:p>
<o:p></o:p>
97 4-bolt 350 with roller cam setup. (bored over 0.030) complete ARP bolt kit. Blue printed and Balenced and decked 9.000
ARP studs and Diamond Stripper windage tray for the mains
Eagle 4340 forged, light-weight crankshaft 0.010 and large journal
Eagle ESP forged rods (lightweight) 5.7 H-beam with arp bolts
WISECO ProTrue pistons ( 10.3 to 1 cr with 64cc heads and a 9.000" deck )
Edelbrock hydraulic roller cam ( dur@.050 234/238 lift (1.6rr) .575/.585 lobe seperation 112* Intake centerline 107*)
CompCams Pro Magnum 1.6 roller rockers
CompCams Pro Magnum Roller Lifters
Edelbrock Victor Jr heads 64cc 2.08 and 1.60 valves Custom Dual Springs and Perfesionally CNC ported all the way through and ARP studed to the block. <o:p></o:p>
Heads flow .320 cfm at only a .550 lift is what I was told by the company that did them (Redman Racing).
Holley Stealth Ram Intake w/ afpr -- fully CNC ported and port match with heads
58mm Throttle Body
30lb fms injectors
Full MSD setup ( Plug Wires, Billet Distributor, Coil, and MSD Digital 6 Box(with tons of options!)).
Hooker SuperComp cer Long Tubes with a custom 3" Mandrel bent duals with an X-pipe.<o:p></o:p>
Underdrive pullies
Edelbrock Polished (new) aluminum high flow water pump<o:p></o:p>
Polished Alternator (new)<o:p></o:p>
Electric fuel pressure guage<o:p></o:p>
Nitrous pressure guage

Race built 700r4 with 2700 stall
Borg Warner 9bolt posi with 3.70 gears (rebuilt and all new parts)<o:p></o:p>
Brand (new) Adj. Panhard bar and (new) Adj. Lower Control Arms <o:p></o:p>
<o:p></o:p>
Car comes with Black and Polished ZR-1 rims 17*9.5 front and 17*11 rear and tires ( <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:Street><st1:address>Nitto street</st1:address></st1:Street> drags on the back)<o:p></o:p>
The interior is a 9 out of a 10 for the year<o:p></o:p>
Has an aftermarket cd player and all new speakers installed(all name brand)<o:p></o:p>
Has everythin for a nitrous plate setup including 10lb bottle mounted in trunk and the line ran up to the engine bay.<o:p></o:p>
<o:p></o:p>
Much much more! too much to list. Only wanting 6k for this Car.......and thats a steal for how much i have invested in the car! Let me know of any interests! formula350ws6_89@hotmail.com or 817-938-4931 cell. Need it sold ASAP. Thanks

 

what is the mileage on engine? where do u live

 

0 (zero) on the motor. Just had the fresh rebuild becuase of the oil pump went out. So its brand new and ready to rock. I'm in Arlington, Tx call me if your interested.

 

i will take $5,000 if you don't want the ZR-1's (rims) and just want the stock rims and tires. Let me know.

 

WILL YOU TAKE A DEPOSIT!?!?! I LOVE THIS CAR I WANT IT, EMAIL ME AT xrectifier5150x@yahoo.com

 

is the car in running condition? is the engine actually in the car? send me some pics of the interior and more pics of the back

does the car have nitrous? also if i just decide to take the old rims, will u put them back on for me?

 

e-mail sent...waiting to hear back. Anyone else even interested?

 

PRICE LOWERED......$5500 firm....This is both sets of rims (ZR-1's and Stock).....must go need sold! 817-938-4931

ps if anyone is interested in both firebirds I have....i will let both go for only $8500...but only if you buy both! Let me know of any interests

formula350ws6_89@hotmail.com

 

TTT

 

reduced to sell.....$5000.00 not a penny less.... need it sold...