boosted6

I thought I would start a new thread just for the Third GEN CAMARO LED digital taillights from Spaghetti Engineering.

I just wanted to post pricing on DIGI-TAILS Digital Sequential LED Taillights for the 86-92 IROC'S. 82-92 models TBA. The prices are as follows:

$299.00 taillight kit, which includes four PCB boards per kit (two boards in each housing), two PCB boards with 90 amber LEDS on each and two boards with 99 red LEDs on each for a total of 378 LED's per kit. This kit also includes a PCB LED bulb for the corner light. This kit can also be an all red LED application.

$349.00 full kit: This includes all mentioned in the kit above but this also includes 2 Electronic Flashers and 2 PCB LED Reverse bulbs.

Installation will not require cutting your housing and installation is simple. There is the option of whether or not to use sequential. This is turned on or off with a dip switch located on the back of the boards. So if you want standard mode you can have that as well.

We are out of prototype and into pre-production!! We appreciate everyone's patience over the last several months.
These lights will be available direct from Spaghetti or through any of there dealers. www.GNSperformance.com , www.musclerodz.com
We will keep everyone posted with the release date. Please sign up for our newsletter at www.spaghettiengineering.com for information, product releases and discounts.


VIDEO: http://www.youtube.com/watch?v=w6g7r2C1H-Q


Picture shown here with Optional PCB LED Reverse Bulb..

toxik IROC

iTrader: (12)

so these ae ready to order?

boosted6

VERY,VERY soon!! They actually have the boards in and they are going to assyemble some and do some final tests and then they will be ready!

All thats left at this point is the final details to insure the customer recives the highest quality product possible.

Scot W.
www.GNSperformance.com

toxik IROC

iTrader: (12)

I am ready when every the lights are ready. So exited too!

boosted6

Keep checking in on this thread from time to time as I post up when they are ready.

Scot W.

kennyglm

FerrMaro

Yes! Thank you!

I H8 WWD

iTrader: (5)

I know there will be, but pictures of the boards and such would be nice. That is all, Ill wait now.

I did not even realize. Are these prices part of a group buy and will raise afterward, or are these the official prices no matter.

krisb410

iTrader: (9)

If you sign up for the newsletter on Spaghetti's web sight, they email you a 10% discount coupon!!!!!

I H8 WWD

iTrader: (5)

Been signed up for months now. But that's a newsletter discount, this is posted in the group purchase thread. That's why I'm wondering if this is just a new product price or a group buy price, in which case I'm not in for the Group buy but Ill definitely be buying the kit later on.

Rich2279

iTrader: (7)

http://www.rowan.edu/today/news/index/FS/106

My school's webpage has an article on the company since he graduated from Rowan's Graduate School. Just in case anyone is interested, the link is above.

krisb410

iTrader: (9)

Who cares what kind of discount it is! I have yet to see any kind of "Group Purchase" price. A discount is a discount! $30-$35 saved, depending on what kit you get, that's a tank gas and lunch! Just tyn to help a few folks save a little.

cam383

iTrader: (4)

Does anyone have installed pictures/video of these yet? Even better does anyone have pictures/video of these installed with the Klearz Tails?

ProjectX

Subscribing to thread. Hopefully these come out soon. Is there a date that you are shooting for to have them completed by? Just for an idea.

boosted6

They have them pretty much ready. They are finalizing the wiring and the final testing of the product before it gets sent out to the public. Should be VERY SOON.

I will let everyone know as soon as they are available..


Thank You!

Scot W.
www.GNSperformance.com

KITT1983

iTrader: (3)

Are the interior LEDs ready yet?

boosted6

Spaghetti Engineering is pleased to announce that they are now taking orders of DIGI-TAILS for 1986-92 Camaro IROC/Z28!! The final production run is finished and are ready to take your order. All members will receive a 5% discount. When ordering Please mention ThirdGen09. They can be ordered through Spahghetti, GNS Performance, MuscleRodz, or any of our distributors. Updated pictures and videos are coming soon. We also now carry 211 LED Dome Light Bulbs, T10/194 Side Marker Bulbs, and 1156 LED Reverse Bulbs.

Price is as follows:

1). PN 1100186 Digi-Tails Regular Taillight Kit 86-92 Camaro IROC/Z28(which includes side marker bulbs.) - $299.00

2). PN 4100186 Digi-Tails Taillight 86-92 Camaro IROC/Z28 FULL Kit (which includes side marker bulbs, 2 Electronic Flashers and 2 LED Reverse Bulbs) - $349.00

3). PN 200005 1156 LED Reverse Bulb - $25.00 ea.

4). PN 200007 T10/194 LED Side Marker Bulb - $9.00 ea.

5). PN 200008 211 LED Dome Light Bulb - $15.00 ea.


Scot W.
www.GNSpeformance.com

boosted6

THESE ARE READY TO ORDER!!!


Just a reminder...



Scot W.
www.GNSperformance.com

toxik IROC

iTrader: (12)

when ever I try and go to gnsperformace ( though your link ) it does not work . are their any vidoes or pics of the finnal product?

boosted6

I don't know why, I just clicked on the link under my name in the post above you and it went right to it.

Just type it in if the links don't work for you, here it is again

www.GNSperformance.com

There are pic's & Video on our site but it's of the prototype boards. The finished product will be pretty much the exact same. New video's and pictures are coming.


Hope this helps,

Scot W.

I H8 WWD

iTrader: (5)

In your other post your link DOES NOT have an 'r' in the 'performance' word. That is why he could not get to your site. Please fix your signature URL link. Thank you. Can't wait to get my kit and bulbs.

boosted6

Thanks,

I looked at several links back but over looked that one, I appreciate it.

Please let us all know how well you like the Fit, Finish and quality of the kit.


Scot W.
www.GNSperformance.com

boosted6

ATTENTION!! All members will receive a 10% discount until the end of June. Please mention code TGO609.

Now accepting orders on our site. www.GNSperformance.com


SW.

camarosource

iTrader: (1)

Anyone happen to know if Brian is on holiday's? I've been trying to get ahold of him via phone for 3 days and only get a voice mailbox. I left a msg but have not received a turn call in 3 days. :-(

boosted6

Brian is no longer with Spaghetti engineering. He left the company Months ago. I still personally deal with them on a daily basis if you need something just let me know, I would be more than happy to help.

SW.

camarobeast84

iTrader: (1)

Hello, where can I find: PN 200008 211 LED Dome Light Bulb - $15.00 ea.?

I didn't see them on Spaghetti's site...

megaspl

So you have to take apart you lights and install these panels?

KITT1983

iTrader: (3)

yes, you have to take appart the lense from the taillight housing to install any led taillight kit

I H8 WWD

iTrader: (5)

Place your order by phone. Simplifies so much when ordering something your not sure of or can't find but they do offer.

Smoothy

the text reads:
Tested on the following models: 1985-92 IROC/Z28 and 91-92 RS Camaro.

but do anyone know if that fits in 84 Taillights?

Copchaser

iTrader: (2)

Is there a chance you will ever do a set for 85-92 TAs?

spade

iTrader: (3)

didnt "stephen" make the ones for a T/A

Smoothy

look here

and here

And now:

david068513

iTrader: (2)

SO since I set most of this stuff up and told you about this and that the third gen community wanted it do I get some for free? or something intresting? lol

david068513

iTrader: (2)

vid of side markers?

nalong87

Any chance these will be available anytime soon for 82 camaros

KITT1983

iTrader: (3)

those are the classicled's TAIL LIGHTS

J_Makk z28

I actually just got mine ups today!!! it took like 2 1/2 weeks to get them. nail bitting for 2 1/2 weeks..n-e-way, took me a couple of house to wire it up and make the wires look decent. i love these leds!!!! much briter. the pics/videos don't do them much justice. u gotta check them out for your self. my suggestion to n e one who gets them, wire it up first and check to be sure everything is working. then go to the disassemble of the housing. btw, that was a sench too. i'm the first to have them here and i can't wait to see heards turn.
any questions, feel free to ask
thx!

camarosource

iTrader: (1)

Yeah I have a photo review of every step I did (literally 300 pics) including videos but I just never have had the time to write the review and post them just yet. It's true, the video just CAN'T give you the true brightness of these! I've had people stop traffic (literally stop in the middle of intersections to have me roll my window how and comment to me on the lights). lol

I set them up with a power supply at my car shows and it definitely is a show stopper when people come by.

It should be noted that you CANNOT rely on the instructions.. least for the 1992 Camaro the wiring in completely different. I ran into many problems because I followed the wiring.. a LOT of trial and error because there are many more wires than what is shown, ground is not the same wire nor color, colors are different or not there..

Also the sockets for the LED bulbs are a bit different that I had to hack the sockets to allow them to make contact.

But the end result is truely impressive!

The opening of the stock lights were NOT fun.. WORST part I think out of it all..

FYI: You may at times come across the bug in the system (However they did mention they would program a delay to prevent this). I reported it to them and they explained the situation.

Try this.

With the car in drive, put the car into park, lift the emergency brake, and pump the brakes, you may notice (if you can see the rear lights either reflecting off something or have someone stand behind the car) one of the turn signals will momentarily strobe at random. Seems to occur more when you put it into park.

I discovered it will do this at random when you apply the brakes while driving on the roads (friend followed me and noted it).

Upon checking with Michael at Spaghetti engineering replied with

J_Makk z28

Well it does say it was preformed on an 85 so thats good news to know for later 3rd Gen folks. also something i did not know prior to this install is that the blinker flasher is up there same center as all the rest just a lil higher. went a whole day without blinkers because i didn't have the electronic flasher in. but now everything is working like it should and i love it. and since i have the 86, my 3rd brake light just blends rite in. its like the brake lights all strobe together. i lover everything about this install and the folks there. i mean u wanna talk about good customer service/ these dudes get 5 outta 5!!!!!

camarosource

iTrader: (1)

Very true! They definately do have A++ Customer service :-) Be sure to take pics and video's

SiCkRs

iTrader: (6)

Anyone have pics of these on the car i would love to
see them on a car

camarosource

iTrader: (1)

http://www.youtube.com/watch?v=TDPx-0HkYQU

CamaroBeau

Very nice looking Camaro and sexy lights!!!

J_Makk z28

Got my video and pics too!!! lemme know what u think!
http://youtu.be/EqzuD-S0bxQ?hd=1

camarosource

iTrader: (1)

While The video itself is nice, I really don't think it's appropriate for that type of language being posted on here.

In otherwords, if anyone is about to view this video from your workplace with the audio on, advisable to turn it off and watch the video WITHOUT sound.

mightymaro94

Twin_Turbo

iTrader: (25)

gets kinda confusing what's going on with the lights after a while w/ the turn signals and brakes going on and off intermittently. That probably wouldn't be allowed here.

J_Makk z28

but heavy metal is? where eating rats and baby guts is? however it's a link so it's optional weather or not you choose to visit. know that everyone has different interest. That's why I love the usa and CALIFORNIA even more. thx!

J_Makk z28

Thats an "auto video" windows live movie maker. it did something funny with the video. but someone is in the car going through the motions. maybe it would be understood with a different crowd