i need the dash wiring harness for a 1989 firebird 350 tpi car. prefer formula model and not hacked up if possible. let me know what you got!

thanks!

 

have an 88 TA under dash harness, uncut, was an L98 350 TPI, digital dash. $75 shipped.

 

i got a dash harness outa 85 throttle body car uncut 25 plus shipping

 

droptop: that may work for me, let me do some double checking, pics if you have them, a close up of the c100 connector especially

rhead: i am pretty sure the 85 harness wont work for my project, but let me check into it as well

 

Cant get pics until tomorrow night, but I will get them. C100 at the firewall design looks the same as other 86-90 TAs I have had, should be able to move wires around to whatever slots as needed.

 

great, thank you!

 

here ya go

 

I have a couple of 88' Formula TPI Analog Dash Harnesses. They run $50.00 plus shipping and handling each. If you have any questions or other needs we can be reached at (805) 522-2539.

Thank you,
Thomas R. ***
(805) 522-2539
www.houseofcamaro.com

 

droptop: you dont happen to have the pinout diagram for 88 do you? i have the one for 89 only and i want to make sure the fuel pump pins line up (i worry that moving wires around will result in disaster).

 

That will only work for you if you install the digital dash.
Droptop,I wish you would have had that harness for sale 2 years ago,it would be in my car now!My digital dash car sat in a backyard with no engine for over a year,and became home to rats or squirrels!(not sure which)
and now has been transformed to analog setup.
check my p/b album for pics.

 

LOL I may have had a harness 2 years ago as well
Sorry no pinouts, just the harness.

 

86 TPI Harness, $70 Shipped. The Cruise control might be missing - but other than that it should still be as is pictured bekow. It will not have any provisions for the VATS system in an 89......





I'll try to get the correct C100 connector diagram for Ya'........

 

Here's the C100 connector for a 86 Firebird. You will need to blow it up to read it,..........Sorry for the bad pic !!!





Send me a P/M for details if your interested............

 

thank you guys for being patient, im taking my time making sure this is the right thing. hoping its the last piece of the puzzle!!

 

Take your time !!!! It's better to be well informed BEFORE buying parts and then finding out you got the wrong ones !

 

Haha, made that mistake at least once or twice!!

 

still chasing wiring diagrams, bear with me....

 

i'm pretty sure i need an 89 harness, i have not as of yet verified compatibility between 88 and 89....

anyone have one???

 

I'm parting out a 89 GTA 350 TPI A/T. The car is stripped and the dash and interior harnesses are the only things left on the car. The harnesses was cut for an aftermarket stereo and speakers, just the wires inside the pod and at the speakers. Are you wanting everything under the dash, PW,PL and PM harnesses, dome light/RV mirror harness and back to the connection for the tail light harness?

 

that would work great! i dont need the power acc stuff (windows, mirrors, etc), dont need the dome light harness, dont need anything for under the carpet. basically just all the wiring under the dash.

 

Money sent to Dokken. Guys, thank you for all your offers - had to go with the failsafe (I hope) 89 harness!

 

Playing it safe is the Best way to Play !!!

 

Hey since we on the topic of wires and the guys who's was talking 1st I do apologize for the cut in but......the wiring harness in my 1988 camaro will it fit a tune port 305 engine or should I leave the original throttle body 305 engine in there

 

i doubt theyll mind being as its been 5 years since the last post lol. your tbi harness will not work on a tpi motor

 

I have one if still needed .Thanks,,,, Jason 443-527-9573 More parts at http://www.facebook.com/ThisWeekInCamaro