Looking for black interior rear plastics, all three pieces, no shade if possible
Thread Starter
Joined: Feb 2005
Posts: 4,506
Likes: 92
From: West Warwick RI, postal code: 02893
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Looking for black interior rear plastics, all three pieces, no shade if possible
I am looking to replace my rear plastics. I need all three big rear pieces. All in black. Please only good condition stuff.
Ideally I am looking for no roll up shade plastics, but WITH electric motor compatability. I am also looking for A-pillars WITH mounting clips. All of them. Finally I am also looking for a 2 or 3 a-pillar gauge pod for hardtop. I have never seen them. I have a two gauge pod in my car now and I don't like having to attach it to the a-pillar. I wish there was one that was built in.
I live in Dedham, MA. 02026. Willing to pay good money if the parts are good.
Thanks everyone.
Ideally I am looking for no roll up shade plastics, but WITH electric motor compatability. I am also looking for A-pillars WITH mounting clips. All of them. Finally I am also looking for a 2 or 3 a-pillar gauge pod for hardtop. I have never seen them. I have a two gauge pod in my car now and I don't like having to attach it to the a-pillar. I wish there was one that was built in.
I live in Dedham, MA. 02026. Willing to pay good money if the parts are good.
Thanks everyone.
Joined: Aug 1999
Posts: 5,276
Likes: 469
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: Looking for black interior rear plastics, all three pieces, no shade if possible
I've got some "A" pillar trim panels (hardtop) for $45 a pair. I've got 2-3 of each side ( with all tabs intact) so you could pick the pair you wanted. $5 for the 10 plastic pins needed for mounting. Should still have a few of these that are missing 1 of the mounting tabs too for $35 a pair.
I've also got some black plastic panels in good shape; but they are not quite a match. They are the correct rear shoulder belt style,... but they HAVE factory holes for the roll-up shade. If you were to consider that kind of panel - I DO have the metal brackets used for installing the plastic roll-up shade mounts. (tach weld them in place.) The only rear hatch panel I've got that's black and for PPD was made for the locking storage cover. It had carpet from the factory - but the carpet is gone. All plastic panels are in real good shape.
LMK if your intrested.
I've also got some black plastic panels in good shape; but they are not quite a match. They are the correct rear shoulder belt style,... but they HAVE factory holes for the roll-up shade. If you were to consider that kind of panel - I DO have the metal brackets used for installing the plastic roll-up shade mounts. (tach weld them in place.) The only rear hatch panel I've got that's black and for PPD was made for the locking storage cover. It had carpet from the factory - but the carpet is gone. All plastic panels are in real good shape.
LMK if your intrested.
Supreme Member
Joined: Oct 2002
Posts: 1,641
Likes: 1
From: Las Vegas, NV
Car: 1985 Camaro, 2015 Audi A4
Engine: V8
Transmission: 700R4
Re: Looking for black interior rear plastics, all three pieces, no shade if possible
xpndbl3 is selling some charcoal interior trim, maybe PM him?
Member
iTrader: (4)
Joined: Oct 2009
Posts: 115
Likes: 0
From: California
Car: 89 CHEVY IROC-Z28
Engine: 355 Built/High Performance
Transmission: 700R4 Swap For T56
Axle/Gears: 3.73 Posi
Re: Looking for black interior rear plastics, all three pieces, no shade if possible
I got some rear plastic pieces i have to see if i have all three. I believe i got the center and passenger side one. Pm me to make an offer.
Thread Starter
Joined: Feb 2005
Posts: 4,506
Likes: 92
From: West Warwick RI, postal code: 02893
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Looking for black interior rear plastics, all three pieces, no shade if possible
Please post pics, I am ready to buy
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Re: Looking for black interior rear plastics, all three pieces, no shade if possible
I am looking to replace my rear plastics. I need all three big rear pieces. All in black. Please only good condition stuff.
Ideally I am looking for no roll up shade plastics, but WITH electric motor compatability. I am also looking for A-pillars WITH mounting clips. All of them. Finally I am also looking for a 2 or 3 a-pillar gauge pod for hardtop. I have never seen them. I have a two gauge pod in my car now and I don't like having to attach it to the a-pillar. I wish there was one that was built in.
I live in Dedham, MA. 02026. Willing to pay good money if the parts are good.
Thanks everyone.
Ideally I am looking for no roll up shade plastics, but WITH electric motor compatability. I am also looking for A-pillars WITH mounting clips. All of them. Finally I am also looking for a 2 or 3 a-pillar gauge pod for hardtop. I have never seen them. I have a two gauge pod in my car now and I don't like having to attach it to the a-pillar. I wish there was one that was built in.
I live in Dedham, MA. 02026. Willing to pay good money if the parts are good.
Thanks everyone.
Thx
Ray
Member
iTrader: (4)
Joined: Oct 2009
Posts: 115
Likes: 0
From: California
Car: 89 CHEVY IROC-Z28
Engine: 355 Built/High Performance
Transmission: 700R4 Swap For T56
Axle/Gears: 3.73 Posi
Re: Looking for black interior rear plastics, all three pieces, no shade if possible
Pm me your email ill send pics
Trending Topics
Re: Looking for black interior rear plastics, all three pieces, no shade if possible
I am looking to replace my rear plastics. I need all three big rear pieces. All in black. Please only good condition stuff.
Ideally I am looking for no roll up shade plastics, but WITH electric motor compatability. I am also looking for A-pillars WITH mounting clips. All of them. Finally I am also looking for a 2 or 3 a-pillar gauge pod for hardtop. I have never seen them. I have a two gauge pod in my car now and I don't like having to attach it to the a-pillar. I wish there was one that was built in.
I live in Dedham, MA. 02026. Willing to pay good money if the parts are good.
Thanks everyone.
Ideally I am looking for no roll up shade plastics, but WITH electric motor compatability. I am also looking for A-pillars WITH mounting clips. All of them. Finally I am also looking for a 2 or 3 a-pillar gauge pod for hardtop. I have never seen them. I have a two gauge pod in my car now and I don't like having to attach it to the a-pillar. I wish there was one that was built in.
I live in Dedham, MA. 02026. Willing to pay good money if the parts are good.
Thanks everyone.
Member
Joined: Sep 2011
Posts: 126
Likes: 0
From: North Iowa
Car: 1984 Trans Am
Engine: 5.7 Liter V8
Transmission: Auto 700R4
Axle/Gears: Stock
Re: Looking for black interior rear plastics, all three pieces, no shade if possible
I might be able to find some at the local yard
Thread Starter
Joined: Feb 2005
Posts: 4,506
Likes: 92
From: West Warwick RI, postal code: 02893
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Looking for black interior rear plastics, all three pieces, no shade if possible
To all, yes I am 100% still interested. I am out of the counrty for work right now, but I will be back in a week or so. If some pieces are hard to get I am really really looking to get the three rear pieces first. Then maybe the rear seat pieces next. With or without the shade, I don't care. I just want GOOD quality black pieces. If someone has it all that would be great.
I guess I should also say that I am looking for a center console LOWER and UPPER. I also want a shifter plate. I do not need the boot or the padded door thing.
If anyone has good prices on any of this, please let me know. If you want to send pics as opposed to posting them, send them to bernal.dennis@gmail.com
Thanks a lot and look forward to coming home.
I guess I should also say that I am looking for a center console LOWER and UPPER. I also want a shifter plate. I do not need the boot or the padded door thing.
If anyone has good prices on any of this, please let me know. If you want to send pics as opposed to posting them, send them to bernal.dennis@gmail.com
Thanks a lot and look forward to coming home.
Joined: Aug 1999
Posts: 5,276
Likes: 469
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: Looking for black interior rear plastics, all three pieces, no shade if possible
Feel free to look me up when you get home if your still looking for parts once you return. I've still got most of the parts that I wrote about earlier in this thread.
What option button holes do you need in the upper console ?? Searching for a manual shifter bezel or auto ??
What option button holes do you need in the upper console ?? Searching for a manual shifter bezel or auto ??
Thread Starter
Joined: Feb 2005
Posts: 4,506
Likes: 92
From: West Warwick RI, postal code: 02893
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Looking for black interior rear plastics, all three pieces, no shade if possible
Power everything, manual.
Joined: Aug 1999
Posts: 5,276
Likes: 469
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: Looking for black interior rear plastics, all three pieces, no shade if possible
I've got a manual bezel,....
You mean Power EVERYTHING - Like this:

or just windows and hatch, I've got 2 that are power windowand hatch, & 1 or 2 upper consoles with no holes.
You mean Power EVERYTHING - Like this:

or just windows and hatch, I've got 2 that are power windowand hatch, & 1 or 2 upper consoles with no holes.
Thread Starter
Joined: Feb 2005
Posts: 4,506
Likes: 92
From: West Warwick RI, postal code: 02893
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Looking for black interior rear plastics, all three pieces, no shade if possible
windows and hatch
Re: Looking for black interior rear plastics, all three pieces, no shade if possible
I am looking to replace my rear plastics. I need all three big rear pieces. All in black. Please only good condition stuff.
Ideally I am looking for no roll up shade plastics, but WITH electric motor compatability. I am also looking for A-pillars WITH mounting clips. All of them. Finally I am also looking for a 2 or 3 a-pillar gauge pod for hardtop. I have never seen them. I have a two gauge pod in my car now and I don't like having to attach it to the a-pillar. I wish there was one that was built in.
I live in Dedham, MA. 02026. Willing to pay good money if the parts are good.
Thanks everyone.
Ideally I am looking for no roll up shade plastics, but WITH electric motor compatability. I am also looking for A-pillars WITH mounting clips. All of them. Finally I am also looking for a 2 or 3 a-pillar gauge pod for hardtop. I have never seen them. I have a two gauge pod in my car now and I don't like having to attach it to the a-pillar. I wish there was one that was built in.
I live in Dedham, MA. 02026. Willing to pay good money if the parts are good.
Thanks everyone.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
kah992
Engine/Drivetrain/Suspension Parts for Sale
2
Aug 19, 2015 02:55 PM









