Dash Pad Cover
Thread Starter
Senior Member
Joined: Oct 2003
Posts: 942
Likes: 0
From: LaGrange (10min from Poughkeepsie), NY
Car: 1992 Camaro RS - not real slow anymore...
Engine: SPDC 360 MAF EFI /w a Holley Stealth Ram
Transmission: T5 untill it blows up from to much torque
Axle/Gears: Ford 9" /w auburn pro & 3.89's
Dash Pad Cover
I'm in need of a dash pad for my 92 Camaro. I've been looking around and cannot believe the prices I'm seeing.
Classic Industried wants $330 for a new dash pad.
Hawks wants $300 for a USED dash pad.
Yearone doesn't even sell them.
You can't touch one on ebay for under $200...
And, Local J/Y's just don't have them anymore.
So what do you do? I was gonna go the route of re-upholstering it in new vinyl. But then I came across Dash Pad Cap's or Covers. How would you rate these? They actually cover up your exhisting dash pad hugging the corners? If this is a good option. Point in the right directing with a URL please.
Classic Industried wants $330 for a new dash pad.
Hawks wants $300 for a USED dash pad.
Yearone doesn't even sell them.
You can't touch one on ebay for under $200...
And, Local J/Y's just don't have them anymore.
So what do you do? I was gonna go the route of re-upholstering it in new vinyl. But then I came across Dash Pad Cap's or Covers. How would you rate these? They actually cover up your exhisting dash pad hugging the corners? If this is a good option. Point in the right directing with a URL please.
Senior Member
iTrader: (10)
Joined: May 2003
Posts: 785
Likes: 0
From: Tampa, Florida
Car: 1987 Chevrolet Camaro Z28 IROCZ
Engine: L98 350, mini ramed and camed
Transmission: T56 6 speed manual
Axle/Gears: 10 bolt 3:73 limited slip
I have one of those carpeted dash mat covers. And I don't realy like it. I had to velcro it to the dash so it would stop flying off when you mash the go pedal. And it looks funny to me. The only resson it's still on there is because it was there when I bought the car and the dash has a hugh crack. And I have other areas on the car that I need to spend the money on first. Adam :-)
Thread Starter
Senior Member
Joined: Oct 2003
Posts: 942
Likes: 0
From: LaGrange (10min from Poughkeepsie), NY
Car: 1992 Camaro RS - not real slow anymore...
Engine: SPDC 360 MAF EFI /w a Holley Stealth Ram
Transmission: T5 untill it blows up from to much torque
Axle/Gears: Ford 9" /w auburn pro & 3.89's
Ya, but what about the ones that a1 auto sells. I see them on ebay all of the time.
eBay Motors: 84 85 86 87 88 89 90-92 Chevy CAMARO Z28 DASH PAD cap ! (item 250003436073 end time Jul-07-06 12:19:03 PDT)
eBay Motors: 84 85 86 87 88 89 90-92 Chevy CAMARO Z28 DASH PAD cap ! (item 250003436073 end time Jul-07-06 12:19:03 PDT)
Ebay A1 AUTO people
Automotive dash repair has never been easier to do!! This dash-cap is a molded dash cover that is made from a type of plastic that gives it flexibility that is similar to rubber. It is durable, easily maneuvered into position, and laminated with a special layer of ultra-violet resistant material which is resistant to fading, deterioration, and cracking. This interior replacement dash pad cap is a breakthrough for the aftermarket and is perfect for any auto or truck restoration project!
Features:
*
Vacuum formed for a great fit
*
Designed to easily install over dry, cracked and faded originals
*
Material-Laminated with a UV resistant material
*
Dull Sheen finish to minimize glare and the grain will match your original
*
Molded in black, but can be painted by the buyer to any color desired with vinyl paint
*
Made from a versatile plastic that allows almost rubber like flexibility
*
Comes with installation instructions
*
Limited Lifetime Warranty - see below
*
Made in USA
Automotive dash repair has never been easier to do!! This dash-cap is a molded dash cover that is made from a type of plastic that gives it flexibility that is similar to rubber. It is durable, easily maneuvered into position, and laminated with a special layer of ultra-violet resistant material which is resistant to fading, deterioration, and cracking. This interior replacement dash pad cap is a breakthrough for the aftermarket and is perfect for any auto or truck restoration project!
Features:
*
Vacuum formed for a great fit
*
Designed to easily install over dry, cracked and faded originals
*
Material-Laminated with a UV resistant material
*
Dull Sheen finish to minimize glare and the grain will match your original
*
Molded in black, but can be painted by the buyer to any color desired with vinyl paint
*
Made from a versatile plastic that allows almost rubber like flexibility
*
Comes with installation instructions
*
Limited Lifetime Warranty - see below
*
Made in USA
Joined: Mar 2002
Posts: 587
Likes: 1
From: middle TENNESSEE
Car: 1989 Iroc rebuild
Engine: 355 carb'd
Transmission: 5spd
Axle/Gears: 3:08 pos for a while
feel your pain
I have one of those carpeted dash mat covers. And I don't realy like it. I had to velcro it to the dash so it would stop flying off when you mash the go pedal. And it looks funny to me. The only resson it's still on there is because it was there when I bought the car and the dash has a hugh crack. And I have other areas on the car that I need to spend the money on first.
Supreme Member
iTrader: (21)
Joined: Dec 2005
Posts: 4,075
Likes: 1
Car: 04 Silverado
Engine: 4.8
Transmission: auto
Do a search, I remember reading about that cap last year but I don't remember if it was any good. I paid $75 shipped for a mint dash pad from a guy on here.
Thread Starter
Senior Member
Joined: Oct 2003
Posts: 942
Likes: 0
From: LaGrange (10min from Poughkeepsie), NY
Car: 1992 Camaro RS - not real slow anymore...
Engine: SPDC 360 MAF EFI /w a Holley Stealth Ram
Transmission: T5 untill it blows up from to much torque
Axle/Gears: Ford 9" /w auburn pro & 3.89's
Originally Posted by 82 Iron Duke
Do a search, I remember reading about that cap last year but I don't remember if it was any good. I paid $75 shipped for a mint dash pad from a guy on here.
Trending Topics
Supreme Member
iTrader: (21)
Joined: Dec 2005
Posts: 4,075
Likes: 1
Car: 04 Silverado
Engine: 4.8
Transmission: auto
I am looking I just don't remember so give me a sec. How bad is your dash pad cracked?
----------
https://www.thirdgen.org/forums/afte...light=dash+pad
https://www.thirdgen.org/forums/sear...earchid=163798
----------
https://www.thirdgen.org/forums/afte...light=dash+pad
https://www.thirdgen.org/forums/sear...earchid=163798
Last edited by 82 Iron Duke; Jul 2, 2006 at 03:00 PM. Reason: Automerged Doublepost
Member
Joined: Aug 2005
Posts: 114
Likes: 0
From: ashland city, tn
Car: 91 z28/2014 charger
Engine: 350/ v6
Transmission: 700r4/ auto
i my be mistaken, but i think hawks also sells the plastic form-fitting covers. i'm interested in these too to protect my new dash pad (when i get it). thanks for the links iron
Last edited by antscrd; Jul 2, 2006 at 03:23 PM.
Thread Starter
Senior Member
Joined: Oct 2003
Posts: 942
Likes: 0
From: LaGrange (10min from Poughkeepsie), NY
Car: 1992 Camaro RS - not real slow anymore...
Engine: SPDC 360 MAF EFI /w a Holley Stealth Ram
Transmission: T5 untill it blows up from to much torque
Axle/Gears: Ford 9" /w auburn pro & 3.89's
Originally Posted by 82 Iron Duke
I am looking I just don't remember so give me a sec. How bad is your dash pad cracked?
----------
https://www.thirdgen.org/forums/afte...light=dash+pad
https://www.thirdgen.org/forums/sear...earchid=163798
----------
https://www.thirdgen.org/forums/afte...light=dash+pad
https://www.thirdgen.org/forums/sear...earchid=163798
I don't even have the old dashpad anymore. I ditched it a year ago before I knew how much they costed due to various cracks and tears. BTW, your 2nd link doesn't work.
Thread
Thread Starter
Forum
Replies
Last Post
