Dashboard Gauge Cluster
Dashboard Gauge Cluster
I want to replace my stock gauge cluster on my 91 camaro rs with a new cluster
i'm not exactly sure what i'm looking for i want something that i can just pop my old one out and pop the new one in
is there any products out there like this
thank you
i'm not exactly sure what i'm looking for i want something that i can just pop my old one out and pop the new one in
is there any products out there like this
thank you
Member
iTrader: (1)
Joined: Feb 2001
Posts: 408
Likes: 0
From: Dayton, OH 45431
Car: 91 Camaro Z28
Engine: 5.0 TPI (LB9)
Transmission: 4L60
Re: Dashboard Gauge Cluster
a 4th gen cluster and dash adds a nice new modern look to the interior. If you dont mind the fabrication, and wiring ... it pops right in ... sort of ...
Re: Dashboard Gauge Cluster
So there aren't after market dash clusters specifically made fore the 3rd gen that would just be like plug and play?
Member

Joined: Apr 2005
Posts: 329
Likes: 0
From: tasmania australia
Car: 1985 z28 camaro
Engine: 305 lg4,edelbrock,3"air cleaner.k&n
Transmission: turbo 700r4 w/b&m megashifter
Axle/Gears: Stock.
Re: Dashboard Gauge Cluster
I put a covans gauge kit in my 85 z28,and it was a fairly simple install.It had a harness with the kit and you have to cut the stock loom plugs off and wire the new ones and wire the led's for the indicators and such.It came up really well.
Alicat.
Alicat.
Joined: Jun 2007
Posts: 764
Likes: 1
From: www.nythirdgen.com
Car: 1987 IROC-Z
Engine: 350 TPI
Transmission: 700R Auto
Re: Dashboard Gauge Cluster
Summit has a nice aftermarket digial dash I heard looks great. It is on my list of mods to make...
Supreme Member
Joined: Apr 2007
Posts: 1,087
Likes: 1
From: St. Petersburg, FL
Car: 88 Camaro
Engine: 305 TBI
Transmission: 700-R4
Axle/Gears: 2.73
Re: Dashboard Gauge Cluster
Right now im swapping my 110 mph cluster to a 145 ^^ and taking out the old bulbs and putting in colored ones, although LEDS would be nice
Trending Topics
Re: Dashboard Gauge Cluster
Link
is that what your talking about, they sound really cool. i would like to see an image of them since summit dosn't seem to have one
do you know where i could find an image? i did a google search on the part number and nothing came up
thank you
Supreme Member
Joined: Jun 2005
Posts: 1,800
Likes: 2
From: Bremerton, WA
Car: 1992 RS / 1989 RS
Engine: 3.1L MFI / Vortec 383 TBI
Transmission: T5 / LS-T56
Axle/Gears: 3.42 open / 3.73 Eaton posi
Re: Dashboard Gauge Cluster
That's a Nordskog set. Even on their site, the 90-92 cluster is not illustrated. They are available for all, but only show the 82-89.
http://www.nordskogperformance.net/p...003-dp4005.htm
I had Dakota Digital make a set for me, they install pretty much the same. You have to tap into the factory harness and run a wire for each signal to the microprocessor that is mounted somewhere under the dash.
http://www.dakotadigital.com/index.c...rod/prd214.htm
Here's mine...
http://www.nordskogperformance.net/p...003-dp4005.htm
I had Dakota Digital make a set for me, they install pretty much the same. You have to tap into the factory harness and run a wire for each signal to the microprocessor that is mounted somewhere under the dash.
http://www.dakotadigital.com/index.c...rod/prd214.htm
Here's mine...
Re: Dashboard Gauge Cluster
That's a Nordskog set. Even on their site, the 90-92 cluster is not illustrated. They are available for all, but only show the 82-89.
http://www.nordskogperformance.net/p...003-dp4005.htm
I had Dakota Digital make a set for me, they install pretty much the same. You have to tap into the factory harness and run a wire for each signal to the microprocessor that is mounted somewhere under the dash.
http://www.dakotadigital.com/index.c...rod/prd214.htm
Here's mine...
http://www.nordskogperformance.net/p...003-dp4005.htm
I had Dakota Digital make a set for me, they install pretty much the same. You have to tap into the factory harness and run a wire for each signal to the microprocessor that is mounted somewhere under the dash.
http://www.dakotadigital.com/index.c...rod/prd214.htm
Here's mine...
it looks awsome, by the way were you dynoing your car when you took the picture ha
your going 102mph with people standing around (you can see them in the reflection)

again for the pic Last edited by tlman12; Sep 4, 2007 at 07:23 PM.
Supreme Member
Joined: Jun 2005
Posts: 1,800
Likes: 2
From: Bremerton, WA
Car: 1992 RS / 1989 RS
Engine: 3.1L MFI / Vortec 383 TBI
Transmission: T5 / LS-T56
Axle/Gears: 3.42 open / 3.73 Eaton posi
Re: Dashboard Gauge Cluster
Glad you like the gauges
Last edited by Al Hasse; Sep 4, 2007 at 09:40 PM.
Thread
Thread Starter
Forum
Replies
Last Post






