Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
#1
Supreme Member
Thread Starter
Join Date: Oct 2007
Location: Ventura County, California
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2002 GS300 Sport Design
Engine: 3.0L 2JZGE
Transmission: 5-Speed Shiftable Automatic
Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
For a while I was looking at these to shifters.
Has anyone installed one of these into your 3rd gen?
Hurst Dual/Gate 2 Shifter
B&M Megashifter
And my friend has one in his car but I hated the fact that shifter itself sits so high and is there a fix for that?
I am aware that they dont make or sell the Hurst Dual/Gate 2 shifter anymore.
So does anyone have any openions on this?
Thanks. Tony.
Has anyone installed one of these into your 3rd gen?
Hurst Dual/Gate 2 Shifter
B&M Megashifter
And my friend has one in his car but I hated the fact that shifter itself sits so high and is there a fix for that?
I am aware that they dont make or sell the Hurst Dual/Gate 2 shifter anymore.
So does anyone have any openions on this?
Thanks. Tony.
Last edited by DeathMetalTony; 10-19-2009 at 03:59 PM.
#2
Supreme Member
Thread Starter
Join Date: Oct 2007
Location: Ventura County, California
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2002 GS300 Sport Design
Engine: 3.0L 2JZGE
Transmission: 5-Speed Shiftable Automatic
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
So does anyone have any comments on this topic?
Tony.
Tony.
#3
Senior Member
Join Date: Jul 2006
Location: 4-22 / 7-25
Posts: 811
Likes: 0
Received 2 Likes
on
2 Posts
Car: '91 Z28 L98 G92
Engine: Modded L98
Transmission: Modded 700R4
Axle/Gears: Modded 10-Bolt
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
IMHO, the Mega Shifter has a wanna-be manual look to it. I've been running a Dual Gate for... well, since you could buy it from Summit. I like it; only problem was / is I couldn't get the steering column-lock cable to hook up.
Bill
Bill
#4
Supreme Member
Thread Starter
Join Date: Oct 2007
Location: Ventura County, California
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2002 GS300 Sport Design
Engine: 3.0L 2JZGE
Transmission: 5-Speed Shiftable Automatic
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
Hey Burnout91,
I been reading and comparing my self an that Hurst Dual/Gate 2 shifter tops off the B&M Mega SHifter by a lot. But the only probloem is trying to get a Hurst Dual/Gate 2 now these days.
Thanks. Tony.
I been reading and comparing my self an that Hurst Dual/Gate 2 shifter tops off the B&M Mega SHifter by a lot. But the only probloem is trying to get a Hurst Dual/Gate 2 now these days.
Thanks. Tony.
#5
Junior Member
Join Date: Aug 2009
Location: Plainville, Kansas
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
One of the things I didn't like about the megashifter is the fact that you cannot be in neutral and put it up in park, It had to be in OD or reverse to put it back in park.
#6
Supreme Member
Thread Starter
Join Date: Oct 2007
Location: Ventura County, California
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2002 GS300 Sport Design
Engine: 3.0L 2JZGE
Transmission: 5-Speed Shiftable Automatic
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
I wasent aware about that on the Megashifter, that sucks. I hate the fact they sit up way too high.
Thanks. Tony.
Thanks. Tony.
#7
Junior Member
Join Date: Aug 2009
Location: Plainville, Kansas
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
No problem, come to think of it, I believe that once you went out of reverse and into neutral, you had to drop it down into OD before putting it back up into reverse. If you don't like the looks of it, by all means dont buy the megashifter. Not much, if any, better then the stock shifter other than it is a ratchet shifter. Not trying to offend anyone, that's just my opinion.
Trending Topics
#8
Senior Member
Join Date: Dec 2004
Location: my garage
Posts: 556
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 firebird T/A
Engine: shinny 350
Transmission: slush box L65
Axle/Gears: round ones "3.73"
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
I use the hurst. . .long live Linda!
#9
Supreme Member
Thread Starter
Join Date: Oct 2007
Location: Ventura County, California
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2002 GS300 Sport Design
Engine: 3.0L 2JZGE
Transmission: 5-Speed Shiftable Automatic
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
#10
Senior Member
Join Date: Dec 2004
Location: my garage
Posts: 556
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 firebird T/A
Engine: shinny 350
Transmission: slush box L65
Axle/Gears: round ones "3.73"
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
not a heck of a whole lot
#12
Supreme Member
Thread Starter
Join Date: Oct 2007
Location: Ventura County, California
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2002 GS300 Sport Design
Engine: 3.0L 2JZGE
Transmission: 5-Speed Shiftable Automatic
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
Thats one badass ride. Was your plenum and runner powder coated?
Tony.
Tony.
#13
Junior Member
Join Date: Jul 2009
Location: Texas
Posts: 14
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Iroc-Z and 1978 Camaro RS LT
Engine: 305 and 350
Transmission: auto
Axle/Gears: stock
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
I have pics of mine still in the box (Hurst dual gate) on the 6th thread.
#14
Supreme Member
Thread Starter
Join Date: Oct 2007
Location: Ventura County, California
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2002 GS300 Sport Design
Engine: 3.0L 2JZGE
Transmission: 5-Speed Shiftable Automatic
#15
Senior Member
iTrader: (9)
Join Date: Nov 2006
Location: LI, NY
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
Car: 90 Camaro RS
Engine: 2.8L v6
Transmission: 700
Axle/Gears: 3.23
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
Both great shifters. I have the B&M in my 90 Camaro and it's really easy to use. I don't see the problem with having to put it into drive in order to put into Park. As for the one poster that says it sits too high, it really isn't that bad at all.
I believe I had the other shifter in my 81 Camaro Z28. Great shifter too. My friends would ask me, "how the hell do you use that" then I would show them how to real fast.
I believe I had the other shifter in my 81 Camaro Z28. Great shifter too. My friends would ask me, "how the hell do you use that" then I would show them how to real fast.
#16
Supreme Member
Thread Starter
Join Date: Oct 2007
Location: Ventura County, California
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2002 GS300 Sport Design
Engine: 3.0L 2JZGE
Transmission: 5-Speed Shiftable Automatic
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
Hey evryone,
Is been a long time when I posted this thread. The news are I got me a megashifter, reason is my neigbor gaved it to me they currently have the Dual Gate Shifter 2, I was like ohh Wot. But hey I can beat free any tips on how to install it. They dont have the instructions any more put it this way they gaved it to me in the Hurst shifter box, lol.
Thanks. Tony.
Is been a long time when I posted this thread. The news are I got me a megashifter, reason is my neigbor gaved it to me they currently have the Dual Gate Shifter 2, I was like ohh Wot. But hey I can beat free any tips on how to install it. They dont have the instructions any more put it this way they gaved it to me in the Hurst shifter box, lol.
Thanks. Tony.
#17
Supreme Member
Join Date: Jun 2005
Location: Bremerton, WA
Posts: 1,800
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1992 RS / 1989 RS
Engine: 3.1L MFI / Vortec 383 TBI
Transmission: T5 / LS-T56
Axle/Gears: 3.42 open / 3.73 Eaton posi
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
This is the one you want
If you can find them anymore.
Lightning Rod Shifter from the 1983/1984 Hurst Olds
I "borrowed" this picture from a car domain page
If you can find them anymore.
Lightning Rod Shifter from the 1983/1984 Hurst Olds
I "borrowed" this picture from a car domain page
#20
Junior Member
Join Date: May 2008
Location: kansas city
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 zo3 z28
Engine: LT1 w/lt4 hotcam kit
Transmission: stage 3 700r4
Axle/Gears: posi 3.42
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
i had a megashifter in my 91 rs and i liked i for bout the first 2 months and then i was out racing and smacked it too hard and went from 1st to reverse at full throttle. eventually i sold my rs and the shifter and picked up a dual gate at a junkyard for free. havent put it in yet cuz my trannys still out hopefully its better than the B&M tho.
#21
Supreme Member
Thread Starter
Join Date: Oct 2007
Location: Ventura County, California
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2002 GS300 Sport Design
Engine: 3.0L 2JZGE
Transmission: 5-Speed Shiftable Automatic
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
i had a megashifter in my 91 rs and i liked i for bout the first 2 months and then i was out racing and smacked it too hard and went from 1st to reverse at full throttle. eventually i sold my rs and the shifter and picked up a dual gate at a junkyard for free. havent put it in yet cuz my trannys still out hopefully its better than the B&M tho.
Tony.
#22
Senior Member
Join Date: Nov 2009
Location: San Jose CA
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC-Z
Engine: 305 TPI
Transmission: 700r4
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
the dual gate beats the megashifter by a long shot
buttt the megashifter beats it in availability, and the stock shifter beats it(megashifter) in reliability IMO!!!
buttt the megashifter beats it in availability, and the stock shifter beats it(megashifter) in reliability IMO!!!
#23
Senior Member
Join Date: May 2008
Location: SF bay area
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Camaro iroc-z28
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.42 Posi
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
i have a dual gate. it has a unique look. and it works pretty well. the megashifter looks alittle cooler. but im not a fan of the detents when u shift.
#26
Supreme Member
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
I think I bought one of the last remaining "affordable" dual gates off of ebay perhaps 10 years ago. Someday I'll get around to installing it (no, it's not for sale).
The last one I seen for sale was on ebay a few years ago; buy-it now price was $700
I'd like to get a shift ball with the newer OD pattern on it; something like this:
I've always thought the Lightning Rods were hokey, but I kind of like them now. Old School is kind of in.
Edit: I just had a thought. Some of the GM shifters in GTO's, Camaros and Firebirds back around 1970-1974 that had TH400's and TH350's had a kind of gated shifter. They didn't have the separate gate, but it had a feature where if in first or second speed, you pushed the stick towards the right and upshifted, it would prevent the stick from over-traveling and bypassing the next gear. Even my '74 6-cylinder Camaro had this shifter. I wonder if this shifter can be modded to work in a 3rd Gen........
The last one I seen for sale was on ebay a few years ago; buy-it now price was $700
I'd like to get a shift ball with the newer OD pattern on it; something like this:
I've always thought the Lightning Rods were hokey, but I kind of like them now. Old School is kind of in.
Edit: I just had a thought. Some of the GM shifters in GTO's, Camaros and Firebirds back around 1970-1974 that had TH400's and TH350's had a kind of gated shifter. They didn't have the separate gate, but it had a feature where if in first or second speed, you pushed the stick towards the right and upshifted, it would prevent the stick from over-traveling and bypassing the next gear. Even my '74 6-cylinder Camaro had this shifter. I wonder if this shifter can be modded to work in a 3rd Gen........
Last edited by paulo57509; 01-04-2010 at 10:15 PM.
#27
Supreme Member
Thread Starter
Join Date: Oct 2007
Location: Ventura County, California
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2002 GS300 Sport Design
Engine: 3.0L 2JZGE
Transmission: 5-Speed Shiftable Automatic
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
That would be cool if they made a ball with the P-R-N-4-3-2-1- pattern. That would be sick.
Tony.
Tony.
#28
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
The Hurst looks a lot better to me no clue why they stopped making them.The do make the same thing for the 2nd gen but the top plate is way different.
#29
Supreme Member
iTrader: (56)
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
THE Hurst is cool looking. and works.
i use the megashifter works 100% of the time. installed right every thing works.. i dont use the race gate.. i like to go into N and the end of the 1/4 mile and shut it down.. i just use the reg gate.. smooth as glass.
no fuss..it still has a R lock out. But thats me..it's just a 10.30 street car.
and works just fine.
and i need a handle on it for the Line lock and the NOS.
(sitting for the last 7 years)
i use the megashifter works 100% of the time. installed right every thing works.. i dont use the race gate.. i like to go into N and the end of the 1/4 mile and shut it down.. i just use the reg gate.. smooth as glass.
no fuss..it still has a R lock out. But thats me..it's just a 10.30 street car.
and works just fine.
and i need a handle on it for the Line lock and the NOS.
(sitting for the last 7 years)
Last edited by articwhiteZ; 01-06-2010 at 03:37 AM.
#30
Supreme Member
Thread Starter
Join Date: Oct 2007
Location: Ventura County, California
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2002 GS300 Sport Design
Engine: 3.0L 2JZGE
Transmission: 5-Speed Shiftable Automatic
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
THE Hurst is cool looking. and works.
i use the megashifter works 100% of the time. installed right every thing works.. i dont use the race gate.. i like to go into N and the end of the 1/4 mile and shut it down.. i just use the reg gate.. smooth as glass.
no fuss..it still has a R lock out. But thats me..it's just a 10.30 street car.
and works just fine.
and i need a handle on it for the Line lock and the NOS.
(sitting for the last 7 years)
i use the megashifter works 100% of the time. installed right every thing works.. i dont use the race gate.. i like to go into N and the end of the 1/4 mile and shut it down.. i just use the reg gate.. smooth as glass.
no fuss..it still has a R lock out. But thats me..it's just a 10.30 street car.
and works just fine.
and i need a handle on it for the Line lock and the NOS.
(sitting for the last 7 years)
Tony.
#31
Supreme Member
iTrader: (56)
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
and install the new seats..( new seat?..why i dont know) just killing time till i can work on the new eng install. if i sit in her.. i start to play with the buttons and make noise like a Hot Rod
Last edited by articwhiteZ; 01-07-2010 at 03:24 PM.
#32
Supreme Member
Thread Starter
Join Date: Oct 2007
Location: Ventura County, California
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2002 GS300 Sport Design
Engine: 3.0L 2JZGE
Transmission: 5-Speed Shiftable Automatic
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
Lol, shes calling for you in her own ways, lol.
Tony.
Tony.
#33
Junior Member
Join Date: May 2008
Location: kansas city
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 zo3 z28
Engine: LT1 w/lt4 hotcam kit
Transmission: stage 3 700r4
Axle/Gears: posi 3.42
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
ya i knoe how yall feel my trannys been out for 2 months but im neot in a hurry t get it fixed since its winter and i have no heater box but as soon as it wwarms up ill be doin donuts somewhere lol
#34
Supreme Member
Thread Starter
Join Date: Oct 2007
Location: Ventura County, California
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2002 GS300 Sport Design
Engine: 3.0L 2JZGE
Transmission: 5-Speed Shiftable Automatic
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
First I understand what your typing but are you texting from a cell or so?
Tony.
Tony.
Last edited by DeathMetalTony; 01-11-2010 at 05:38 PM.
#36
Supreme Member
Thread Starter
Join Date: Oct 2007
Location: Ventura County, California
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2002 GS300 Sport Design
Engine: 3.0L 2JZGE
Transmission: 5-Speed Shiftable Automatic
#37
Member
Join Date: Jun 2005
Location: dfw tx
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 camaro
Engine: 350
Transmission: th 350
Axle/Gears: 3:42
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
just put a megashifter in my 84, and i really dig it. to me the dual gate looks kinda dumb, but to each his own.
#38
Supreme Member
Thread Starter
Join Date: Oct 2007
Location: Ventura County, California
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2002 GS300 Sport Design
Engine: 3.0L 2JZGE
Transmission: 5-Speed Shiftable Automatic
Re: Hurst Dual/Gate 2 VS B&M Mega Shifter ! ! !
I would preffer the Hurst just for the way it looks but the Mega Shifter is also a cool looking shifter.
Tony.
Tony.
Thread
Thread Starter
Forum
Replies
Last Post