When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
AFIK it's not available. It's not really a model specific part. It's just a flat strip of foam rubber. They didn't even glue it down much at the factory since it's not really a weather seal, just keeps stuff out of the a pillar trim when the window is down.
You can use almost any generic rubber strip there.
what stealtht/a said, take a piece to a local hardware store and match it up as close as you can, most people buy the smaller sized garage door seal, as it is angled and only has the adhesive on half of the strip
No, it's not the triangle rubber. Caveman305 and StealthT/A know what I'm talking about. I have some replacement a-pillar trim pieces but they all have cracked rubber. If it didn't show some when the car door is open I wouldn't fool with it. I have looked but so far could not find something similar enough to work well. I will try looking for the smaller garage door seal. That sounds like it might work. Thanx guys!
it was hard to dig up somthing. to fill the Void. (thats all GM did) fill a Void.
after lots for digging looking and trying things this is what works the best in looks and fit.
you will have to add a STRIP of the 3M thin tap to it (see pics)
after its on it will lay just as the other stuff GM used. and fit the same.. 100%
you can get it from any NAPA parts store
after you install the A Piller plastic the fit will look just like it did from GM..
what i wanted it to do was fit 100%. i have had my car from the day it left the dealer. i i just found the cracks in the void seal they used. this is the only thing i found that will sit and stay and push out just a itty bitty bit. just as GM used.
yes it's not shaped the same...you could take the time to cut out the back so you have the V shape of the real GM stuff. but ya dont have to. all your doing is filling the Void... one bag will do both sides.
your A piller plastic will be marked as to placement. start to finnish (mine was) add just a tad bit more looks better when on..
Last edited by articwhiteZ; Jun 24, 2014 at 11:34 PM.
Ameriseal 11000 is not sold many places and you get more than you need. Once I do mine I'll probably have enough left for another card. LMK if interested in the leftover.
Ameriseal 11000 is not sold many places and you get more than you need. Once I do mine I'll probably have enough left for another card. LMK if interested in the leftover.
Put me at the top of that list please, I'll take what you have left if it will do another car!
